- In simplewallet, we don't report invalid/missing commands to the
CLI because we throw and catch errors that are logged silently. Now we
always log the to the user unless it's thrown by something other than
the wallet.
- Add invalid_command exception to distinguish between an error thrown
by the console_handler (i.e. missing/empty command) versus an actual
std::out_of_range thrown by wallet code (previously would have
incorrectly reported "Unknown command ... ", when it was a known command).
- Catch exceptions thrown via commands sent by RPC over the terminal and
shut down the wallet properly.
- In console_handler don't react to cmd_handler failing. Previously, if
a command failed it'd assume invalid command and log or try the next
branch which was detecting application exit.
High-level details:
This redesigns the RPC layer to make it much easier to work with,
decouples it from an embedded HTTP server, and gets the vast majority of
the RPC serialization and dispatch code out of a very commonly included
header.
There is unfortunately rather a lot of interconnected code here that
cannot be easily separated out into separate commits. The full details
of what happens here are as follows:
Major details:
- All of the RPC code is now in a `cryptonote::rpc` namespace; this
renames quite a bit to be less verbose: e.g. CORE_RPC_STATUS_OK
becomes `rpc::STATUS_OK`, and `cryptonote::COMMAND_RPC_SOME_LONG_NAME`
becomes `rpc::SOME_LONG_NAME` (or just SOME_LONG_NAME for code already
working in the `rpc` namespace).
- `core_rpc_server` is now completely decoupled from providing any
request protocol: it is now *just* the core RPC call handler.
- The HTTP RPC interface now lives in a new rpc/http_server.h; this code
handles listening for HTTP requests and dispatching them to
core_rpc_server, then sending the results back to the caller.
- There is similarly a rpc/lmq_server.h for LMQ RPC code; more details
on this (and other LMQ specifics) below.
- RPC implementing code now returns the response object and throws when
things go wrong which simplifies much of the rpc error handling. They
can throw anything; generic exceptions get logged and a generic
"internal error" message gets returned to the caller, but there is
also an `rpc_error` class to return an error code and message used by
some json-rpc commands.
- RPC implementing functions now overload `core_rpc_server::invoke`
following the pattern:
RPC_BLAH_BLAH::response core_rpc_server::invoke(RPC_BLAH_BLAH::request&& req, rpc_context context);
This overloading makes the code vastly simpler: all instantiations are
now done with a small amount of generic instantiation code in a single
.cpp rather than needing to go to hell and back with a nest of epee
macros in a core header.
- each RPC endpoint is now defined by the RPC types themselves,
including its accessible names and permissions, in
core_rpc_server_commands_defs.h:
- every RPC structure now has a static `names()` function that returns
the names by which the end point is accessible. (The first one is
the primary, the others are for deprecated aliases).
- RPC command wrappers define their permissions and type by inheriting
from special tag classes:
- rpc::RPC_COMMAND is a basic, admin-only, JSON command, available
via JSON RPC. *All* JSON commands are now available via JSON RPC,
instead of the previous mix of some being at /foo and others at
/json_rpc. (Ones that were previously at /foo are still there for
backwards compatibility; see `rpc::LEGACY` below).
- rpc::PUBLIC specifies that the command should be available via a
restricted RPC connection.
- rpc::BINARY specifies that the command is not JSON, but rather is
accessible as /name and takes and returns values in the magic epee
binary "portable storage" (lol) data format.
- rpc::LEGACY specifies that the command should be available via the
non-json-rpc interface at `/name` for backwards compatibility (in
addition to the JSON-RPC interface).
- some epee serialization got unwrapped and de-templatized so that it
can be moved into a .cpp file with just declarations in the .h. (This
makes a *huge* difference for core_rpc_server_commands_defs.h and for
every compilation unit that includes it which previously had to
compile all the serialization code and then throw all by one copy away
at link time). This required some new macros so as to not break a ton
of places that will use the old way putting everything in the headers;
The RPC code uses this as does a few other places; there are comments
in contrib/epee/include/serialization/keyvalue_serialization.h as to
how to use it.
- Detemplatized a bunch of epee/storages code. Most of it should have
have been using templates at all (because it can only ever be called
with one type!), and now it isn't. This broke some things that didn't
properly compile because of missing headers or (in one case) a messed
up circular dependency.
- Significantly simplified a bunch of over-templatized serialization
code.
- All RPC serialization definitions is now out of
core_rpc_server_commands_defs.h and into a single .cpp file
(core_rpc_server_commands_defs.cpp).
- core RPC no longer uses the disgusting
BEGIN_URI_MAP2/MAP_URI_BLAH_BLAH macros. This was a terrible design
that forced slamming tons of code into a common header that didn't
need to be there.
- epee::struct_init is gone. It was a horrible hack that instiated
multiple templates just so the coder could be so lazy and write
`some_type var;` instead of properly value initializing with
`some_type var{};`.
- Removed a bunch of useless crap from epee. In particular, forcing
extra template instantiations all over the place in order to nest
return objects inside JSON RPC values is no longer needed, as are a
bunch of stuff related to the above de-macroization of the code.
- get_all_service_nodes, get_service_nodes, and get_n_service_nodes are
now combined into a single `get_service_nodes` (with deprecated
aliases for the others), which eliminates a fair amount of
duplication. The biggest obstacle here was getting the requested
fields reference passed through: this is now done by a new ability to
stash a context in the serialization object that can be retrieved by a
sub-serialized type.
LMQ-specifics:
- The LokiMQ instance moves into `cryptonote::core` rather than being
inside cryptonote_protocol. Currently the instance is used both for
qnet and rpc calls (and so needs to be in a common place), but I also
intend future PRs to use the batching code for job processing
(replacing the current threaded job queue).
- rpc/lmq_server.h handles the actual LMQ-request-to-core-RPC glue.
Unlike http_server it isn't technically running the whole LMQ stack
from here, but the parallel name with http_server seemed appropriate.
- All RPC endpoints are supported by LMQ under the same names as defined
generically, but prefixed with `rpc.` for public commands and `admin.`
for restricted ones.
- service node keys are now always available, even when not running in
`--service-node` mode: this is because we want the x25519 key for
being able to offer CURVE encryption for lmq RPC end-points, and
because it doesn't hurt to have them available all the time. In the
RPC layer this is now called "get_service_keys" (with
"get_service_node_key" as an alias) since they aren't strictly only
for service nodes. This also means code needs to check
m_service_node, and not m_service_node_keys, to tell if it is running
as a service node. (This is also easier to notice because
m_service_node_keys got renamed to `m_service_keys`).
- Added block and mempool monitoring LMQ RPC endpoints: `sub.block` and
`sub.mempool` subscribes the connection for new block and new mempool
TX notifications. The latter can notify on just blink txes, or all
new mempool txes (but only new ones -- txes dumped from a block don't
trigger it). The client gets pushed a [`notify.block`, `height`,
`hash`] or [`notify.tx`, `txhash`, `blob`] message when something
arrives.
Minor details:
- rpc::version_t is now a {major,minor} pair. Forcing everyone to pack
and unpack a uint32_t was gross.
- Changed some macros to constexprs (e.g. CORE_RPC_ERROR_CODE_...).
(This immediately revealed a couple of bugs in the RPC code that was
assigning CORE_RPC_ERROR_CODE_... to a string, and it worked because
the macro allows implicit conversion to a char).
- De-templatizing useless templates in epee (i.e. a bunch of templated
types that were never invoked with different types) revealed a painful
circular dependency between epee and non-epee code for tor_address and
i2p_address. This crap is now handled in a suitably named
`net/epee_network_address_hack.cpp` hack because it really isn't
trivial to extricate this mess.
- Removed `epee/include/serialization/serialize_base.h`. Amazingly the
code somehow still all works perfectly with this previously vital
header removed.
- Removed bitrotted, unused epee "crypted_storage" and
"gzipped_inmemstorage" code.
- Replaced a bunch of epee::misc_utils::auto_scope_leave_caller with
LOKI_DEFERs. The epee version involves quite a bit more instantiation
and is ugly as sin. Also made the `loki::defer` class invokable for
some edge cases that need calling before destruction in particular
conditions.
- Moved the systemd code around; it makes much more sense to do the
systemd started notification as in daemon.cpp as late as possible
rather than in core (when we can still have startup failures, e.g. if
the RPC layer can't start).
- Made the systemd short status string available in the get_info RPC
(and no longer require building with systemd).
- during startup, print (only) the x25519 when not in SN mode, and
continue to print all three when in SN mode.
- DRYed out some RPC implementation code (such as set_limit)
- Made wallet_rpc stop using a raw m_wallet pointer
This commit continues the complete replacement of the spaghetti code
mess that was inside daemon/ and daemonize/ which started in #1138, and
looked like a entry level Java programmer threw up inside the code base.
This greatly simplifies it, removing a whole pile of useless abstraction
layers that don't actually abstract anything, and results in
considerably simpler code. (Many of the changes here were also carried
out in #1138; this commit updates them with the merged result which
amends some things from that PR and goes further in some places).
In detail:
- the `--detach` (and related `--pidfile`) options are gone. (--detach
is still handled, but now just prints a fatal error). Detaching a
process is an archaic unix mechanism that has no place on a modern
system. If you *really* want to do it anyway, `nohup lokid &` will do
the job. (The Windows service control code, which is probably seldom
used, is kept because it seems potentially useful for Windows users).
- Many of the `t_whatever` classes in daemon/* are just deleted (mostly
done in #1138); each one was a bunch of junk code that wraps 3-4 lines
but forces an extra layer (not even a generic abstraction, just a
useless wrapper) for no good reason and made the daemon code painfully
hard to understand and work with.
- All of the remaining `t_whatever` classes in daemon/* are either
renamed to `whatever` (because prefixing every class with `t_` is
moronic).
- Some stupid related code (e.g. epee's command handler returning an
unsuitable "usage" string that has to be string modified into what we
want) was replaced with more generic, useful code.
- Replaced boost mutexes/cvs with std ones in epee command handler, and
deleted some commented out code.
- The `--public-node` option handling was terrible: it was being handled
in main, but main doesn't know anything about options, so then it
forced it through the spaghetti objects *beside* the pack of all
options that got passed along. Moved it to a more sane location
(core_rpc_server) and parse it out with some sanity.
- Changed a bunch of std::bind's to lambdas because, at least for small
lambdas (i.e. with only one-or-two pointers for captures) they will
generally be more efficient as the values can be stored in
std::function's without any memory allocations.
This is intended to catch traffic coming from a web browser,
so we avoid issues with a web page sending a transfer RPC to
the wallet. Requiring a particular user agent can act as a
simple password scheme, while we wait for 0MQ and proper
authentication to be merged.
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
many RPC functions added by the daemonize changes
(and related changes on the upstream dev branch that were not merged)
were commented out (apart from return). Other than that, this *should*
work...at any rate, it builds, and that's something.
