oxen-io
/
oxen-mq
mirror of https://github.com/oxen-io/oxen-mq.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
oxen-mq/oxenmq/oxenmq.h

1836 lines
92 KiB
C++
Raw Permalink Blame History

// Copyright (c) 2019-2021, The Oxen Project
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#pragma once
#include <condition_variable>
#include <string>
#include <string_view>
#include <list>
#include <queue>
#include <type_traits>
#include <unordered_map>
#include <unordered_set>
#include <memory>
#include <functional>
#include <thread>
#include <mutex>
#include <iostream>
#include <chrono>
#include <atomic>
#include <cassert>
#include <cstdint>
#include <future>
#include <variant>
#include "zmq.hpp"
#include "address.h"
#include <oxenc/bt_serialize.h>
#include "connections.h"
#include "message.h"
#include "auth.h"
#if ZMQ_VERSION < ZMQ_MAKE_VERSION (4, 3, 0)
// Timers were not added until 4.3.0
#error "ZMQ >= 4.3.0 required"
#endif
namespace oxenmq {
using namespace std::literals;
/// Logging levels passed into LogFunc. (Note that trace does nothing more than debug in a release
/// build).
enum class LogLevel { fatal, error, warn, info, debug, trace };
// Forward declarations; see batch.h
namespace detail { class Batch; }
template <typename R> class Batch;
/** The keep-alive time for a send() that results in a establishing a new outbound connection. To
* use a longer keep-alive to a host call `connect()` first with the desired keep-alive time or pass
* the send_option::keep_alive.
*/
inline constexpr auto DEFAULT_SEND_KEEP_ALIVE = 30s;
/** Default keep-alive time for a connect_sn() (unless overridden via a connect_option::keep_alive
* argument).
*/
inline constexpr auto DEFAULT_CONNECT_SN_KEEP_ALIVE = 5min;
// The default timeout for connect_remote()
inline constexpr auto REMOTE_CONNECT_TIMEOUT = 10s;
// Default timeout for connect_inproc()
inline constexpr auto INPROC_CONNECT_TIMEOUT = 50ms;
// The amount of time we wait for a reply to a REQUEST before calling the callback with
// `false` to signal a timeout.
inline constexpr auto DEFAULT_REQUEST_TIMEOUT = 15s;
/// Maximum length of a category
inline constexpr size_t MAX_CATEGORY_LENGTH = 50;
/// Maximum length of a command
inline constexpr size_t MAX_COMMAND_LENGTH = 200;
class CatHelper;
/// Opaque handle for a tagged thread constructed by add_tagged_thread(...). Not directly
/// constructible, but is safe (and cheap) to copy.
struct TaggedThreadID {
private:
int _id;
explicit constexpr TaggedThreadID(int id) : _id{id} {}
friend class OxenMQ;
template <typename R> friend class Batch;
friend class Job;
};
/// Opaque handler for a timer constructed by add_timer(...). Safe (and cheap) to copy. The only
/// real use of this is to pass it in to cancel_timer() to cancel a timer.
struct TimerID {
// Default construction; creates an object with a non-timer internal id value.
TimerID() : _id{0} {}
private:
int _id;
explicit constexpr TimerID(int id) : _id{id} {}
friend class OxenMQ;
};
/**
* Class that handles OxenMQ listeners, connections, proxying, and workers. An application
* typically has just one instance of this class.
*/
class OxenMQ {
private:
/// The global context
zmq::context_t context;
/// A unique id for this OxenMQ instance, assigned in a thread-safe manner during construction.
const int object_id;
/// The x25519 keypair of this connection. For service nodes these are the long-run x25519 keys
/// provided at construction, for non-service-node connections these are generated during
/// construction.
std::string pubkey, privkey;
/// True if *this* node is running in service node mode (whether or not actually active)
bool local_service_node = false;
/// The thread in which most of the intermediate work happens (handling external connections
/// and proxying requests between them to worker threads)
std::thread proxy_thread;
/// Will be true (and is guarded by a mutex) if the proxy thread is quitting; guards against new
/// control sockets from threads trying to talk to the proxy thread.
bool proxy_shutting_down = false;
/// We have one seldom-used mutex here: it is generally locked just once per thread (the first
/// time the thread calls get_control_socket()) and once more by the proxy thread when it shuts
/// down.
std::mutex control_sockets_mutex;
/// Called to obtain a "command" socket that attaches to `control` to send commands to the
/// proxy thread from other threads. This socket is unique per thread and OxenMQ instance.
zmq::socket_t& get_control_socket();
/// Per-thread control sockets used by oxenmq threads to talk to this object's proxy thread.
std::unordered_map<std::thread::id, std::unique_ptr<zmq::socket_t>> control_sockets;
public:
/// Callback type invoked to determine whether the given new incoming connection is allowed to
/// connect to us and to set its authentication level.
///
/// @param address - the address of the incoming connection. For TCP connections this is an IP
/// address; for UDP connections it's a string such as "localhost:UID:GID:PID".
/// @param pubkey - the x25519 pubkey of the connecting client (32 byte string). Note that this
/// will only be non-empty for incoming connections on `listen_curve` sockets; `listen_plain`
/// sockets do not have a pubkey.
/// @param service_node - will be true if the `pubkey` is in the set of known active service
/// nodes.
///
/// @returns an `AuthLevel` enum value indicating the default auth level for the incoming
/// connection, or AuthLevel::denied if the connection should be refused.
using AllowFunc = std::function<AuthLevel(std::string_view address, std::string_view pubkey, bool service_node)>;
/// Callback that is invoked when we need to send a "strong" message to a SN that we aren't
/// already connected to and need to establish a connection. This callback returns the ZMQ
/// connection string we should use which is typically a string such as `tcp://1.2.3.4:5678`.
using SNRemoteAddress = std::function<std::string(std::string_view pubkey)>;
/// The callback type for registered commands.
using CommandCallback = std::function<void(Message& message)>;
/// The callback for making requests. This is called with `true` and a (moved) vector of data
/// part strings when we get a reply, or `false` and empty vector on timeout.
using ReplyCallback = std::function<void(bool success, std::vector<std::string> data)>;
/// Called to write a log message. This will only be called if the `level` is >= the current
/// OxenMQ object log level. It must be a raw function pointer (or a capture-less lambda) for
/// performance reasons. Takes four arguments: the log level of the message, the filename and
/// line number where the log message was invoked, and the log message itself.
using Logger = std::function<void(LogLevel level, const char* file, int line, std::string msg)>;
/// Callback for the success case of connect_remote()
using ConnectSuccess = std::function<void(ConnectionID)>;
/// Callback for the failure case of connect_remote()
using ConnectFailure = std::function<void(ConnectionID, std::string_view)>;
/// Explicitly non-copyable, non-movable because most things here aren't copyable, and a few
/// things aren't movable, either. If you need to pass the OxenMQ instance around, wrap it
/// in a unique_ptr or shared_ptr.
OxenMQ(const OxenMQ&) = delete;
OxenMQ& operator=(const OxenMQ&) = delete;
OxenMQ(OxenMQ&&) = delete;
OxenMQ& operator=(OxenMQ&&) = delete;
/** How long to wait for handshaking to complete on external connections before timing out and
* closing the connection. Setting this only affects new outgoing connections. */
std::chrono::milliseconds HANDSHAKE_TIME = 10s;
/** Whether to use a random zmq routing ID, or one based on the pubkey for new outgoing
* connections. Using the pubkey is desirable when connections between endpoints are unique as
* it allows the listener to recognize that the incoming connection is a reconnection from the
* same remote and handover routing to the new socket while closing off the (likely dead) old
* socket. This, however, prevents a single OxenMQ instance (or multiple OxenMQ instances using
* the same keys) from establishing multiple connections to the same listening OxenMQ, which is
* sometimes useful (for example when testing, or when sharing an authentication key), and so
* this option can be overridden to `true` to use completely random zmq routing ids on outgoing
* connections (which will thus allow multiple connections).
*
* Note that this only affects the default for outgoing connections: you can override an
* individual connection by passing a connect_option::ephemeral_routing_id option into the
* connect_sn/connect_remote method.
*/
bool EPHEMERAL_ROUTING_ID = false;
/** Maximum incoming message size; if a remote tries sending a message larger than this they get
* disconnected. -1 means no limit. */
int64_t MAX_MSG_SIZE = 1 * 1024 * 1024;
/** Maximum open sockets, passed to the ZMQ context during start(). The default here is 10k,
* designed to be enough to be more than enough to allow a full-mesh SN layer connection if
* necessary for the forseeable future. The actual value passed to ZMQ will be slightly higher,
* to allow for internal inter-thread communication sockets. Set to 0 to explicitly avoid
* setting the value; set to -1 to use the maximum supported by ZMQ. */
int MAX_SOCKETS = 10000;
/** Minimum reconnect interval: when a connection fails or dies, wait this long before
* attempting to reconnect. (ZMQ may randomize the value somewhat to avoid reconnection
* storms). See RECONNECT_INTERVAL_MAX as well. The OxenMQ default is 250ms.
*/
std::chrono::milliseconds RECONNECT_INTERVAL = 250ms;
/** Maximum reconnect interval. When this is set to a value larger than RECONNECT_INTERVAL then
* ZMQ's reconnection logic uses an exponential backoff: each reconnection attempts waits twice
* as long as the previous attempt, up to this maximum. The OxenMQ default is 5 seconds.
*/
std::chrono::milliseconds RECONNECT_INTERVAL_MAX = 5s;
/** How long (in ms) to linger sockets when closing them; this is the maximum time zmq spends
* trying to sending pending messages before dropping them and closing the underlying socket
* after the high-level zmq socket is closed. */
std::chrono::milliseconds CLOSE_LINGER = 5s;
/** How frequently we cleanup connections (closing idle connections, calling connect or request
* failure callbacks). Making this slower results in more "overshoot" before failure callbacks
* are invoked; making it too fast results in more proxy thread overhead. Any change to this
* variable must be set before calling start().
*/
std::chrono::milliseconds CONN_CHECK_INTERVAL = 250ms;
/** Whether to enable heartbeats on incoming/outgoing connections. If set to > 0 then we set up
* ZMQ to send a heartbeat ping over the socket this often, which helps keep the connection
* alive and lets failed connections be detected sooner (see the next option).
*
* Only new connections created after changing this are affected, so if changing it is
* recommended to set it before calling `start()`.
*/
std::chrono::milliseconds CONN_HEARTBEAT = 15s;
/** When CONN_HEARTBEAT is enabled, this sets how long we wait for a reply on a socket before
* considering the socket to have died and closing it.
*
* Only new connections created after changing this are affected, so if changing it is
* recommended to set it before calling `start()`.
*/
std::chrono::milliseconds CONN_HEARTBEAT_TIMEOUT = 30s;
/// Allows you to set options on the internal zmq context object. For advanced use only.
void set_zmq_context_option(zmq::ctxopt option, int value);
/** The umask to apply when constructing sockets (which affects any new ipc:// listening sockets
* that get created). Does nothing if set to -1 (the default), and does nothing on Windows.
* Note that the umask is applied temporarily during `start()`, so may affect other threads that
* create files/directories at the same time as the start() call.
*/
int STARTUP_UMASK = -1;
/** The gid that owns any sockets when constructed (same as umask)
*/
int SOCKET_GID = -1;
/** The uid that owns any sockets when constructed (same as umask but requires root)
*/
int SOCKET_UID = -1;
/** If true then enable IPv6 connectivity on incoming/outgoing sockets. This is disabled by
* default because enabling it in libzmq breaks IPv4-only clients trying to connect to
* dual-stack IPv6+IPv4 hosts by hostname (the client will *only* try IPv6 if it finds an IPv6
* address, even if it has no IPv6 connectivity).
*
* This only has an effect for sockets created *after* it is changed.
*/
bool IPV6 = false;
/// A special TaggedThreadID value that always refers to the proxy thread; the main use of this is
/// to direct very simple batch completion jobs to be executed directly in the proxy thread.
inline static constexpr TaggedThreadID run_in_proxy{-1};
/// Writes a message to the logging system; intended mostly for internal use.
template <typename... T>
void log(LogLevel lvl, const char* filename, int line, const T&... stuff);
private:
/// The lookup function that tells us where to connect to a peer, or empty if not found.
SNRemoteAddress sn_lookup;
/// The log level; this is atomic but we use relaxed order to set and access it (so changing it
/// might not be instantly visible on all threads, but that's okay).
std::atomic<LogLevel> log_lvl{LogLevel::warn};
/// The callback to call with log messages
Logger logger;
///////////////////////////////////////////////////////////////////////////////////
/// NB: The following are all the domain of the proxy thread (once it is started)!
/// The socket we listen on for handling ZAP authentication requests (the other end is internal
/// to zmq which sends requests to us as needed).
zmq::socket_t zap_auth;
struct bind_data {
std::string address;
bool curve;
int64_t conn_id;
AllowFunc allow;
std::function<void(bool)> on_bind;
bind_data(std::string addr, bool curve, AllowFunc allow, std::function<void(bool)> on_bind)
: address{std::move(addr)}, curve{curve}, conn_id{0}, allow{std::move(allow)}, on_bind{std::move(on_bind)} {}
};
/// Addresses on which we are listening (or, before start(), on which we will listen).
std::vector<bind_data> bind;
/// Info about a peer's established connection with us. Note that "established" means both
/// connected and authenticated. Note that we only store peer info data for SN connections (in
/// or out), and outgoing non-SN connections. Incoming non-SN connections are handled on the
/// fly.
struct peer_info {
/// Pubkey of the remote, if this connection is a curve25519 connection; empty otherwise.
std::string pubkey;
/// True if we've authenticated this peer as a service node. This gets set on incoming
/// messages when we check the remote's pubkey, and immediately on outgoing connections to
/// SNs (since we know their pubkey -- we'll fail to connect if it doesn't match).
bool service_node = false;
/// The auth level of this peer, as returned by the AllowFunc for incoming connections or
/// specified during outgoing connections.
AuthLevel auth_level = AuthLevel::none;
/// The socket id through which this connection is established
int64_t conn_id;
/// Will be set to a non-empty routing prefix *if* one is necessary on the connection. This
/// is used only for SN peers (non-SN incoming connections don't have a peer_info record,
/// and outgoing connections don't have a route).
std::string route;
/// Returns true if this is an outgoing connection. (This is simply an alias for
/// route.empty() -- outgoing connections never have a route, incoming connections always
/// do).
bool outgoing() const { return route.empty(); }
/// The last time we sent or received a message (or had some other relevant activity) on
/// this connection. Used for closing outgoing connections that have reached an inactivity
/// expiry time (closing inactive conns for incoming connections is done by the other end).
std::chrono::steady_clock::time_point last_activity;
/// Updates last_activity to the current time
void activity() { last_activity = std::chrono::steady_clock::now(); }
/// After more than this much inactivity we will close an idle (outgoing) connection
std::chrono::milliseconds idle_expiry;
};
/// Currently peer connections: id -> peer_info. The ID is as returned by connect_remote or a
/// SN pubkey string.
std::unordered_multimap<ConnectionID, peer_info> peers;
/// For outgoing connections to service nodes `peers` contains the service node connection id,
/// but we sometimes need to be able to get the peer info from a numeric connection id (for
/// example, for incoming messages on a connection we made); this map lets us do that.
std::map<int64_t, ConnectionID> outgoing_sn_conns;
/// The next ConnectionID value we should use (for outgoing, non-SN connections).
std::atomic<int64_t> next_conn_id{1};
/// Remotes we are still trying to connect to (via connect_remote(), not connect_sn()); when
/// we pass handshaking we move them out of here and (if set) trigger the on_connect callback.
/// Unlike regular node-to-node peers, these have an extra "HI"/"HELLO" sequence that we used
/// before we consider ourselves connected to the remote.
std::list<std::tuple<int64_t /*conn_id*/, std::chrono::steady_clock::time_point, ConnectSuccess, ConnectFailure>>
pending_connects;
/// Pending requests that have been sent out but not yet received a matching "REPLY". The value
/// is the timeout timestamp.
std::unordered_map<std::string, std::pair<std::chrono::steady_clock::time_point, ReplyCallback>>
pending_requests;
/// different polling sockets the proxy handler polls: this always contains some internal
/// sockets for inter-thread communication followed by a pollitem for every connection (both
/// incoming and outgoing) in `connections`. We rebuild this from `connections` whenever
/// `connections_updated` is set to true.
///
/// On Linux, when using epoll, this is not used.
std::vector<zmq::pollitem_t> pollitems;
/// On Linux, when using epoll, this tracks the epoll file descriptor. Otherwise it does
/// nothing.
int epoll_fd = -1;
/// Rebuilds pollitems to include the internal sockets + all incoming/outgoing sockets.
void rebuild_pollitems();
/// The connections to/from remotes we currently have open, both listening and outgoing.
std::map<int64_t, zmq::socket_t> connections;
/// The connection ID of the built-in inproc listener for making requests to self
int64_t inproc_listener_connid;
/// If set then it indicates a change in `connections` which means we need to rebuild pollitems
/// and stop using existing connections iterators.
bool connections_updated = true;
/// Socket we listen on to receive control messages in the proxy thread. Each thread has its own
/// internal "control" connection (returned by `get_control_socket()`) to this socket used to
/// give instructions to the proxy such as instructing it to initiate a connection to a remote
/// or send a message.
zmq::socket_t command;
/// Timers. TODO: once cppzmq adds an interface around the zmq C timers API then switch to it.
struct TimersDeleter { void operator()(void* timers); };
struct timer_data { std::function<void()> function; bool squelch; bool running; int thread; };
std::unordered_map<int, timer_data> timer_jobs; // keys are zmq timer ids
std::unique_ptr<void, TimersDeleter> timers;
// The next internal timer id (returned opaquely via TimerID return from add_timer)
std::atomic<int> next_timer_id = 1;
// Maps our internal timer id values (returned by add_timer) to zmq timer ids; used for
// delete_timer().
std::unordered_map<int, int> timer_zmq_id;
public:
// This needs to be public because we have to be able to call it from a plain C function.
// Nothing external may call it!
void _queue_timer_job(int);
private:
/// Router socket to reach internal worker threads from proxy
zmq::socket_t workers_socket;
/// indices of idle, active workers; note that this vector is usually oversized
std::vector<unsigned int> idle_workers;
size_t idle_worker_count = 0; // Actual # elements of idle_workers in use
/// Maximum number of general task workers, specified by set_general_threads()
int general_workers = std::max<int>(1, std::thread::hardware_concurrency());
/// Maximum number of possible worker threads we can have. This is calculated when starting,
/// and equals general_workers plus the sum of all categories' reserved threads counts plus the
/// reserved batch workers count. This is also used to signal a shutdown; we set it to 0 when
/// quitting.
int max_workers;
/// Number of active workers
int active_workers() const { return workers.size() - idle_worker_count; }
/// Worker thread loop. Tagged and start are provided for a tagged worker thread.
void worker_thread(unsigned int index, std::optional<std::string> tagged, std::function<void()> start);
/// If set, skip polling for one proxy loop iteration (set when we know we have something
/// processible without having to shove it onto a socket, such as scheduling an internal job).
bool proxy_skip_one_poll = false;
/// Does the proxying work. Signals startup success (or failure) via the promise.
void proxy_loop(std::promise<void>);
void proxy_loop_init();
void proxy_conn_cleanup();
using control_message_array = std::array<zmq::message_t, 3>;
void proxy_worker_message(control_message_array& parts, size_t len);
void proxy_process_queue();
void proxy_schedule_reply_job(std::function<void()> f);
/// Looks up a peers element given a connect id (for outgoing connections where we already
/// knew the pubkey and SN status) or an incoming zmq message (which has the pubkey and sn
/// status metadata set during initial connection authentication), creating a new peer element
/// if required.
decltype(peers)::iterator proxy_lookup_peer(int64_t conn_id, zmq::message_t& msg);
/// Handles built-in primitive commands in the proxy thread for things like "BYE" that have to
/// be done in the proxy thread anyway (if we forwarded to a worker the worker would just have
/// to send an instruction back to the proxy to do it). Returns true if one was handled, false
/// to continue with sending to a worker.
bool proxy_handle_builtin(int64_t conn_id, zmq::socket_t& sock, std::vector<zmq::message_t>& parts);
struct run_info;
/// Gets an idle worker's run_info and removes the worker from the idle worker list. If there
/// is no idle worker this creates a new `workers` element for a new worker (and so you should
/// only call this if new workers are permitted). Note that if this creates a new work info the
/// worker will *not* yet be started, so the caller must create the thread (in `.thread`) after
/// setting up the job if `.thread.joinable()` is false.
run_info& get_idle_worker();
/// Runs the worker; called after the `run` object has been set up. If the worker thread hasn't
/// been created then it is spawned; otherwise it is sent a RUN command.
void proxy_run_worker(run_info& run);
/// Sets up a job for a worker then signals the worker (or starts a worker thread)
void proxy_to_worker(int64_t conn_id, zmq::socket_t& sock, std::vector<zmq::message_t>& parts);
/// proxy thread command handlers for commands sent from the outer object QUIT. This doesn't
/// get called immediately on a QUIT command: the QUIT commands tells workers to quit, then this
/// gets called after all works have done so.
void proxy_quit();
/// proxy handler for binding to addresses given via listen_*().
bool proxy_bind(bind_data& bind, size_t bind_index);
// Common setup code for setting up an external (incoming or outgoing) socket.
void setup_external_socket(zmq::socket_t& socket);
// Sets the various properties on an outgoing socket prior to connection. If remote_pubkey is
// provided then the connection will be curve25519 encrypted and authenticate; otherwise it will
// be unencrypted and unauthenticated. Note that the remote end must be in the same mode (i.e.
// either accepting curve connections, or not accepting curve).
void setup_outgoing_socket(zmq::socket_t& socket, std::string_view remote_pubkey, bool use_ephemeral_routing_id);
/// Sets the various properties on an listening socket prior to binding.
void setup_incoming_socket(zmq::socket_t& socket, bool curve, std::string_view pubkey, std::string_view privkey, size_t bind_index);
/// Common connection implementation used by proxy_connect/proxy_send. Returns the socket and,
/// if a routing prefix is needed, the required prefix (or an empty string if not needed). For
/// an optional connect that fails (or some other connection failure), returns nullptr for the
/// socket.
///
/// @param pubkey the pubkey to connect to
/// @param connect_hint if we need a new connection and this is non-empty then we *may* use it
/// instead of doing a call to `sn_lookup()`.
/// @param optional if we don't already have a connection then don't establish a new one
/// @param incoming_only only relay this if we have an established incoming connection from the
/// given SN, otherwise don't connect (like `optional`)
/// @param keep_alive the keep alive for the connection, if we establish a new outgoing
/// connection. If we already have an outgoing connection then its keep-alive gets increased to
/// this if currently less than this.
/// @param ephemeral_routing_id whether or not to use a random (true) or pubkey-based (false) routing id
std::pair<zmq::socket_t*, std::string> proxy_connect_sn(std::string_view pubkey,
std::string_view connect_hint, bool optional, bool incoming_only, bool outgoing_only,
bool ephemeral_routing_id, std::chrono::milliseconds keep_alive);
/// CONNECT_SN command telling us to connect to a new pubkey. Returns the socket (which could
/// be existing or a new one). This basically just unpacks arguments and passes them on to
/// proxy_connect_sn().
std::pair<zmq::socket_t*, std::string> proxy_connect_sn(oxenc::bt_dict_consumer data);
/// Opens a new connection to a remote, with callbacks. This is the proxy-side implementation
/// of the `connect_remote()` call.
void proxy_connect_remote(oxenc::bt_dict_consumer data);
/// Called to disconnect our remote connection to the given id (if we have one).
void proxy_disconnect(oxenc::bt_dict_consumer data);
void proxy_disconnect(ConnectionID conn, std::chrono::milliseconds linger);
/// SEND command. Does a connect first, if necessary.
void proxy_send(oxenc::bt_dict_consumer data);
/// REPLY command. Like SEND, but only has a listening socket route to send back to and so is
/// weaker (i.e. it cannot reconnect to the SN if the connection is no longer open).
void proxy_reply(oxenc::bt_dict_consumer data);
/// Individual batch jobs waiting to run; .second is the 0-n batch number or -1 for the
/// completion job
using batch_job = std::pair<detail::Batch*, int>;
using batch_queue = std::deque<batch_job>;
batch_queue batch_jobs, reply_jobs;
int batch_jobs_active = 0;
int reply_jobs_active = 0;
int batch_jobs_reserved = -1;
int reply_jobs_reserved = -1;
/// Runs any queued batch jobs
void proxy_run_batch_jobs(batch_queue& jobs, int reserved, int& active, bool reply);
/// BATCH command. Called with a Batch<R> (see oxenmq/batch.h) object pointer for the proxy to
/// take over and queue batch jobs.
void proxy_batch(detail::Batch* batch);
/// TIMER command. Called with a serialized list containing: our local timer_id, function
/// pointer to assume ownership of, an interval count (in ms), and whether or not jobs should be
/// squelched (see `add_timer()`).
void proxy_timer(oxenc::bt_list_consumer timer_data);
/// Same, but deserialized
void proxy_timer(int timer_id, std::function<void()> job, std::chrono::milliseconds interval, bool squelch, int thread);
/// TIMER_DEL command. Called with a timer_id to delete an active timer.
void proxy_timer_del(int timer_id);
/// ZAP (https://rfc.zeromq.org/spec:27/ZAP/) authentication handler; this does non-blocking
/// processing of any waiting authentication requests for new incoming connections.
void process_zap_requests();
/// Handles a control message from some outer thread to the proxy
void proxy_control_message(control_message_array& parts, size_t len);
/// Closing any idle connections that have outlived their idle time. Note that this only
/// affects outgoing connections; incomings connections are the responsibility of the other end.
void proxy_expire_idle_peers();
/// Helper method to actually close a remote connection and update the stuff that needs updating.
void proxy_close_connection(int64_t removed, std::chrono::milliseconds linger);
/// Closes an outgoing connection immediately, updates internal variables appropriately.
/// Returns the next iterator (the original may or may not be removed from peers, depending on
/// whether or not it also has an active incoming connection).
decltype(peers)::iterator proxy_close_outgoing(decltype(peers)::iterator it);
struct category {
Access access;
std::unordered_map<std::string, std::pair<CommandCallback, bool /*is_request*/>> commands;
unsigned int reserved_threads = 0;
unsigned int active_threads = 0;
int max_queue = 200;
int queued = 0;
category(Access access, unsigned int reserved_threads, int max_queue)
: access{access}, reserved_threads{reserved_threads}, max_queue{max_queue} {}
};
/// Categories, mapped by category name.
std::unordered_map<std::string, category> categories;
/// For enabling backwards compatibility with command renaming: this allows mapping one command
/// to another in a different category (which happens before the category and command lookup is
/// done).
std::unordered_map<std::string, std::string> command_aliases;
using cat_call_t = std::pair<category*, const std::pair<CommandCallback, bool>*>;
/// Retrieve category and callback from a command name, including alias mapping. Warns on
/// invalid commands and returns nullptrs. The command name will be updated in place if it is
/// aliased to another command.
cat_call_t get_command(std::string& command);
/// Checks a peer's authentication level. Returns true if allowed, warns and returns false if
/// not.
bool proxy_check_auth(int64_t conn_id, bool outgoing, const peer_info& peer,
zmq::message_t& command, const cat_call_t& cat_call, std::vector<zmq::message_t>& data);
struct injected_task {
category& cat;
std::string command;
std::string remote;
std::function<void()> callback;
};
/// Injects a external callback to be handled by a worker; this is the proxy side of
/// inject_task().
void proxy_inject_task(injected_task task);
/// Set of active service nodes.
pubkey_set active_service_nodes;
/// Resets or updates the stored set of active SN pubkeys
void proxy_set_active_sns(std::string_view data);
void proxy_set_active_sns(pubkey_set pubkeys);
void proxy_update_active_sns(oxenc::bt_list_consumer data);
void proxy_update_active_sns(pubkey_set added, pubkey_set removed);
void proxy_update_active_sns_clean(pubkey_set added, pubkey_set removed);
/// Details for a pending command; such a command already has authenticated access and is just
/// waiting for a thread to become available to handle it. This also gets used (via the
/// `callback` variant) for injected external jobs to be able to integrate some external
/// interface with the oxenmq job queue.
struct pending_command {
category& cat;
std::string command;
std::vector<zmq::message_t> data_parts;
std::variant<
const std::pair<CommandCallback, bool>*, // Normal command callback
std::function<void()> // Injected external callback
> callback;
ConnectionID conn;
Access access;
std::string remote;
// Normal ctor for an actual omq command being processed
pending_command(category& cat, std::string command, std::vector<zmq::message_t> data_parts,
const std::pair<CommandCallback, bool>* callback, ConnectionID conn, Access access, std::string remote)
: cat{cat}, command{std::move(command)}, data_parts{std::move(data_parts)},
callback{callback}, conn{std::move(conn)}, access{std::move(access)}, remote{std::move(remote)} {}
// Ctor for an injected external command.
pending_command(category& cat, std::string command, std::function<void()> callback, std::string remote)
: cat{cat}, command{std::move(command)}, callback{std::move(callback)}, remote{std::move(remote)} {}
};
std::list<pending_command> pending_commands;
/// End of proxy-specific members
///////////////////////////////////////////////////////////////////////////////////
/// Structure that contains the data for a worker thread - both the thread itself, plus any
/// transient data we are passing into the thread.
struct run_info {
bool is_batch_job = false;
bool is_reply_job = false;
bool is_tagged_thread_job = false;
bool is_injected = false;
// resets the job type bools, above.
void reset() { is_batch_job = is_reply_job = is_tagged_thread_job = is_injected = false; }
// If is_batch_job is false then these will be set appropriate (if is_batch_job is true then
// these shouldn't be accessed and likely contain stale data). Note that if the command is
// an external, injected command then conn, access, conn_route, and data_parts will be
// empty/default constructed.
category *cat;
std::string command;
ConnectionID conn; // The connection (or SN pubkey) to reply on/to.
Access access; // The access level of the invoker (actual level, can be higher than the command's requirement)
std::string remote; // The remote address from which we received the request.
std::string conn_route; // if non-empty this is the reply routing prefix (for incoming connections)
std::vector<zmq::message_t> data_parts;
// If is_batch_job true then these are set (if is_batch_job false then don't access these!):
int batch_jobno; // >= 0 for a job, -1 for the completion job
// The callback or batch job to run. The first of these is for regular tasks, the second
// for batch jobs, the third for injected external tasks.
std::variant<
const std::pair<CommandCallback, bool>*,
detail::Batch*,
std::function<void()>
> to_run;
// These belong to the proxy thread and must not be accessed by a worker:
std::thread worker_thread;
uint32_t worker_id; // The index in `workers` (0-n) or index+1 in `tagged_workers` (1-n)
std::string worker_routing_id; // "wXXXX" where XXXX is the raw bytes of worker_id, or tXXXX for tagged threads.
std::string worker_routing_name; // "w123" or "t123" -- human readable version of worker_routing_id
/// Loads the run info with an incoming command
run_info& load(category* cat, std::string command, ConnectionID conn, Access access, std::string remote,
std::vector<zmq::message_t> data_parts, const std::pair<CommandCallback, bool>* callback);
/// Loads the run info with an injected external command
run_info& load(category* cat, std::string command, std::string remote, std::function<void()> callback);
/// Loads the run info with a stored pending command
run_info& load(pending_command&& pending);
/// Loads the run info with a batch job
run_info& load(batch_job&& bj, bool reply_job = false, int tagged_thread = 0);
};
/// Data passed to workers for the RUN command. The proxy thread sets elements in this before
/// sending RUN to a worker then the worker uses it to get call info, and only allocates it
/// once, before starting any workers. Workers may only access their own index and may not
/// change it.
std::vector<run_info> workers;
/// Dealer sockets for workers to use to talk to the proxy thread. These are initialized during
/// start(), and after that belong exclusively to the worker thread with the same index as used
/// in `workers`.
std::vector<zmq::socket_t> worker_sockets;
/// Workers that are reserved for tagged thread tasks (as created with add_tagged_thread). The
/// queue here is similar to worker_jobs, but contains only the tagged thread's jobs. The bool
/// is whether the worker is currently busy (true) or available (false).
std::vector<std::tuple<run_info, bool, batch_queue>> tagged_workers;
/// Startup signalling for tagged workers; the tagged threads get initialized before startup,
/// then wait via this bool/c.v. to synchronize startup with the proxy thread. This mutex isn't
/// used after startup is complete.
std::mutex tagged_startup_mutex;
enum class tagged_go_mode { WAIT, GO, SHUTDOWN };
tagged_go_mode tagged_go = tagged_go_mode::WAIT;
std::condition_variable tagged_cv;
public:
/**
* OxenMQ constructor. This constructs the object but does not start it; you will typically
* want to first add categories and commands, then finish startup by invoking `start()`.
* (Categories and commands cannot be added after startup).
*
* @param pubkey the public key (32-byte binary string). For a service node this is the service
* node x25519 keypair. For non-service nodes this (and privkey) can be empty strings to
* automatically generate an ephemeral keypair.
*
* @param privkey the service node's private key (32-byte binary string), or empty to generate
* one.
*
* @param service_node - true if this instance should be considered a service node for the
* purpose of allowing "Access::local_sn" remote calls. (This should be true if we are
* *capable* of being a service node, whether or not we are currently actively). If specified
* as true then the pubkey and privkey values must not be empty.
*
* @param sn_lookup function that takes a pubkey key (32-byte binary string) and returns a
* connection string such as "tcp://1.2.3.4:23456" to which a connection should be established
* to reach that service node. Note that this function is only called if there is no existing
* connection to that service node, and that the function is never called for a connection to
* self (that uses an internal connection instead). Also note that the service node must be
* listening in curve25519 mode (otherwise we couldn't verify its authenticity). Should return
* empty for not found or if SN lookups are not supported.
*
* @param log a function or callable object that writes a log message. If omitted then all log
* messages are suppressed.
*
* @param level the initial log level; defaults to warn. The log level can be changed later by
* calling log_level(...).
*/
OxenMQ( std::string pubkey,
std::string privkey,
bool service_node,
SNRemoteAddress sn_lookup,
Logger logger = nullptr,
LogLevel level = LogLevel::warn);
/**
* Simplified OxenMQ constructor for a non-listening client or simple listener without any
* outgoing SN connection lookup capabilities. The OxenMQ object will not be able to establish
* new connections (including reconnections) to service nodes by pubkey.
*/
explicit OxenMQ(
Logger logger = nullptr,
LogLevel level = LogLevel::warn)
: OxenMQ("", "", false, [](auto) { return ""s; /*no peer lookups*/ }, std::move(logger), level) {}
/**
* Destructor; instructs the proxy to quit. The proxy tells all workers to quit, waits for them
* to quit and rejoins the threads then quits itself. The outer thread (where the destructor is
* running) rejoins the proxy thread.
*/
~OxenMQ();
/// Sets the log level of the OxenMQ object.
void log_level(LogLevel level);
/// Gets the log level of the OxenMQ object.
LogLevel log_level() const;
/**
* Add a new command category. This method may not be invoked after `start()` has been called.
* This method is also not thread safe, and is generally intended to be called (along with
* add_command) immediately after construction and immediately before calling start().
*
* @param name - the category name which must consist of one or more characters and may not
* contain a ".".
*
* @param access_level the access requirements for remote invocation of the commands inside this
* category.
*
* @param reserved_threads if non-zero then the worker thread pool will ensure there are at at
* least this many threads either current processing or available to process commands in this
* category. This is used to ensure that a category's commands can be invoked even if
* long-running commands in some other category are currently using all worker threads. This
* can increase the number of worker threads above the `general_workers` parameter given in the
* constructor, but will only do so if the need arised: that is, if a command request arrives
* for a category when all workers are busy and no worker is currently processing any command in
* that category.
*
* @param max_queue is the maximum number of incoming messages in this category that we will
* queue up when waiting for a worker to become available for this category. Once the queue for
* a category exceeds this many incoming messages then new messages will be dropped until some
* messages are processed off the queue. -1 means unlimited, 0 means we will never queue (which
* means just dropping messages for this category if no workers are available to instantly
* handle the request).
*
* @returns a CatHelper object that makes adding commands slightly less verbose (see the
* CatHelper describe, above).
*/
CatHelper add_category(std::string name, Access access_level, unsigned int reserved_threads = 0, int max_queue = 200);
/**
* Adds a new command to an existing category. This method may not be invoked after `start()`
* has been called.
*
* @param category - the category name (must already be created by a call to `add_category`)
*
* @param name - the command name, without the `category.` prefix.
*
* @param callback - a callable object which is callable as `callback(zeromq::Message &)`
*/
void add_command(const std::string& category, std::string name, CommandCallback callback);
/**
* Adds a new "request" command to an existing category. These commands are just like normal
* commands, but are expected to call `msg.send_reply()` with any data parts on every request,
* while normal commands are more general.
*
* Parameters given here are identical to `add_command()`.
*/
void add_request_command(const std::string& category, std::string name, CommandCallback callback);
/**
* Adds a command alias; this is intended for temporary backwards compatibility: if any aliases
* are defined then every command (not just aliased ones) has to be checked on invocation to see
* if it is defined in the alias list. May not be invoked after `start()`.
*
* Aliases should follow the `category.command` format for both the from and to names, and
* should only be called for `to` categories that are already defined. The category name is not
* currently enforced on the `from` name (for backwards compatility with Oxen's quorumnet code)
* but will be at some point.
*
* Access permissions for an aliased command depend only on the mapped-to value; for example, if
* `cat.meow` is aliased to `dog.bark` then it is the access permissions on `dog` that apply,
* not those of `cat`, even if `cat` is more restrictive than `dog`.
*/
void add_command_alias(std::string from, std::string to);
/** Creates a "tagged thread" and starts it immediately. A tagged thread is one that batches,
* jobs, and timer jobs can be sent to specifically, typically to perform coordination of some
* thread-unsafe work.
*
* Tagged threads will *only* process jobs sent specifically to them; they do not participate in
* the thread pool used for regular jobs. Each tagged thread also has its own job queue
* completely separate from any other jobs.
*
* Tagged threads must be created *before* `start()` is called. The name will be used to set the
* thread name in the process table (if supported on the OS).
*
* \param name - the name of the thread; will be used in log messages and (if supported by the
* OS) as the system thread name.
*
* \param start - an optional callback to invoke from the thread as soon as OxenMQ itself starts
* up (i.e. after a call to `start()`).
*
* \returns a TaggedThreadID object that can be passed to job(), batch(), or add_timer() to
* direct the task to the tagged thread.
*/
TaggedThreadID add_tagged_thread(std::string name, std::function<void()> start = nullptr);
/**
* Sets the number of worker threads reserved for batch jobs. If not explicitly called then
* this defaults to half the general worker threads configured (rounded up). This works exactly
* like reserved_threads for a category, but allows to batch jobs. See category for details.
*
* Note that some internal jobs are counted as batch jobs: in particular timers added via
* add_timer() are scheduled as batch jobs.
*
* Cannot be called after start()ing the OxenMQ instance.
*/
void set_batch_threads(int threads);
/**
* Sets the number of worker threads reserved for handling replies from servers; this is
* mostly for responses to `request()` calls, but also gets used for other network-related
* events such as the ConnectSuccess/ConnectFailure callbacks for establishing remote non-SN
* connections.
*
* Defaults to one-eighth of the number of configured general threads, rounded up.
*
* Cannot be changed after start()ing the OxenMQ instance.
*/
void set_reply_threads(int threads);
/**
* Sets the number of general worker threads. This is the target number of threads to run that
* we generally try not to exceed. These threads can be used for any command, and will be
* created (up to the limit) on demand. Note that individual categories (or batch jobs) with
* reserved threads can create threads in addition to the amount specified here if necessary to
* fulfill the reserved threads count for the category.
*
* Adjusting this also adjusts the default values of batch and reply threads, above.
*
* Defaults to `std::thread::hardware_concurrency()`.
*
* Cannot be called after start()ing the OxenMQ instance.
*/
void set_general_threads(int threads);
/**
* Finish starting up: binds to the bind locations given in the constructor and launches the
* proxy thread to handle message dispatching between remote nodes and worker threads.
*
* Raises an exception if the proxy thread cannot be successfully started, such as if a bind
* error occurs.
*
* Things you want to do before calling this:
* - Use `add_category`/`add_command` to set up any commands remote connections can invoke.
* - If any commands require SN authentication, specify a list of currently active service node
* pubkeys via `set_active_sns()` (and make sure this gets updated when things change by
* another `set_active_sns()` or a `update_active_sns()` call). It *is* possible to make the
* initial call after calling `start()`, but that creates a window during which incoming
* remote SN connections will be erroneously treated as non-SN connections.
* - If this OMQ instance should accept incoming connections, set up any listening ports via
* `listen_curve()` and/or `listen_plain()`.
*/
void start();
/** Start listening on the given bind address using curve authentication/encryption. Incoming
* connections will only be allowed from clients that already have the server's pubkey, and
* will be encrypted. `allow_connection` is invoked for any incoming connections on this
* address to determine the incoming remote's access and authentication level.
*
* If called before `start()` then the given bind address is mandatory and start() will throw if
* the bind fails. If called after `start()` then the bind may fail (in which case the callback
* will be used to notify of the failure).
*
* @param bind address - can be any string zmq supports; typically a tcp IP/port combination
* such as: "tcp://\*:4567" or "tcp://1.2.3.4:5678".
*
* @param allow_connection function to call to determine whether to allow the connection and, if
* so, the authentication level it receives. If omitted (or null) the default returns
* AuthLevel::none access for all connections.
*
* @param on_bind function to call when the port has been successfully opened or failed to
* open. For addresses set up before .start() this will be called during `start()` itself; for
* post-start listens this will be called from the proxy thread when it opens the new port.
* Note that this function must is called directly from the proxy thread and so should be fast
* and non-blocking.
*/
void listen_curve(std::string bind,
AllowFunc allow_connection = nullptr,
std::function<void(bool success)> on_bind = nullptr);
/** Start listening on the given bind address in unauthenticated plain text mode. Incoming
* connections can come from anywhere. `allow_connection` is invoked for any incoming
* connections on this address to determine the incoming remote's access and authentication
* level. Note that `allow_connection` here will be called with an empty pubkey.
*
* @param bind address - can be any string zmq supports, for example a tcp IP/port combination
* such as: "tcp://\*:4567" or "tcp://1.2.3.4:5678".
*
* @param allow_connection function to call to determine whether to allow the connection and, if
* so, the authentication level it receives. If omitted (or null) the default returns
* AuthLevel::none access for all connections.
*
* @param on_result called after binding with the result; see `listen_curve` for details.
*/
void listen_plain(std::string bind,
AllowFunc allow_connection = nullptr,
std::function<void(bool success)> on_bind = nullptr);
/**
* Try to initiate a connection to the given SN in anticipation of needing a connection in the
* future. If a connection is already established, the connection's idle timer will be reset
* (so that the connection will not be closed too soon). If the given idle timeout is greater
* than the current idle timeout then the timeout increases to the new value; if less than the
* current timeout it is ignored. (Note that idle timeouts only apply if the existing
* connection is an outgoing connection).
*
* Note that this method (along with send) doesn't block waiting for a connection; it merely
* instructs the proxy thread that it should establish a connection.
*
* @param pubkey - the public key (32-byte binary string) of the service node to connect to
* @param options - connection options; see the structs in `connect_option`, in particular:
* - keep_alive -- how long the SN connection will be kept alive after valid activity
* - hint -- a remote address hint that may be used instead of doing a lookup
* - ephemeral_routing_id -- allows you to override the EPHEMERAL_ROUTING_ID option for
* this connection.
*
* For backwards compatibility you may also directly pass (as a `options` value):
* - a std::chrono::duration duration (equivalent to connect_option::keep_alive{duration})
* - a string or string_view hint (equivalent to connect_option::hint{hint})
* but these should be considered deprecated and the connection_option versions preferred.
*
* @returns a ConnectionID that identifies an connection with the given SN. Typically you
* *don't* need to worry about this (and can just discard it): you can always simply pass the
* pubkey as a string wherever a ConnectionID is called.
*/
template <typename... Option>
ConnectionID connect_sn(std::string_view pubkey, const Option&... opts);
/**
* Establish a connection to the given remote with callbacks invoked on a successful or failed
* connection. Returns a ConnectionID associated with the connection being attempted. It is
* possible to send to the remote before the successful callback is invoked, but there is no
* guarantee that the messages will be delivered (e.g. if the connection ultimately fails).
*
* For connections to a service node you generally want connect_sn() instead (which verifies
* that it is talking to the SN and encrypts the connection).
*
* Unlike `connect_sn`, the connection established here will be kept open indefinitely (until
* you call disconnect).
*
* The `on_connect` and `on_failure` callbacks are invoked when a connection has been
* established or failed to establish.
*
* @param remote the remote connection address either as implicitly from a string or as a full
* oxenmq::address object; see address.h for details. This specifies both the connection
* address and whether curve encryption should be used.
* @param on_connect called with the identifier after the connection has been established.
* @param on_failure called with the identifier and failure message if we fail to connect.
* @param options supports various connection options:
* - passing an AuthLevel here sets the auth_level for incoming messages on this
* connection (instead of AuthLevel::none).
* - anything else should be one of the `oxenmq::connect_option` structs.
* - passing a std::chrono::duration type is permitted (but deprecated) for backwards
* compatibility; it is equivalent to `connection_option::timeout{duration}`.
*
* @returns ConnectionID that uniquely identifies the connection to this remote node. In order
* to talk to it you will need the returned value (or a copy of it).
*/
template <typename... Option>
ConnectionID connect_remote(const address& remote, ConnectSuccess on_connect, ConnectFailure on_failure,
const Option&... options);
/// Deprecated connect_remote variants that take the address as a string view. The second
/// version also takes a pubkey (for a secure connection) as a separate argument. Use of these
/// is deprecated and discouraged: use an address with connect_option::whatever arguments
/// instead.
[[deprecated("use connect_remote() with a oxenmq::address instead")]]
ConnectionID connect_remote(std::string_view remote, ConnectSuccess on_connect, ConnectFailure on_failure,
AuthLevel auth_level = AuthLevel::none, std::chrono::milliseconds timeout = REMOTE_CONNECT_TIMEOUT);
/// Deprecated version of the above that takes the remote address and remote pubkey for curve
/// encryption as separate arguments. New code should either use a pubkey-embedded address
/// string, or specify remote address and pubkey with an `address` object such as:
/// connect_remote(address{remote, pubkey}, ...)
[[deprecated("use connect_remote() with a oxenmq::address instead")]]
ConnectionID connect_remote(std::string_view remote, ConnectSuccess on_connect, ConnectFailure on_failure,
std::string_view pubkey,
AuthLevel auth_level = AuthLevel::none,
std::chrono::milliseconds timeout = REMOTE_CONNECT_TIMEOUT);
/// Connects to the built-in in-process listening socket of this OxenMQ server for local
/// communication. Note that auth_level defaults to admin (unlike connect_remote), and the
/// default timeout is much shorter.
///
/// Also note that incoming inproc requests are unauthenticated: that is, they will always have
/// admin-level access.
template <typename... Option>
ConnectionID connect_inproc(ConnectSuccess on_connect, ConnectFailure on_failure,
const Option&... options);
/**
* Disconnects an established outgoing connection established with `connect_remote()` (or, less
* commonly, `connect_sn()`).
*
* @param id the connection id, as returned by `connect_remote()` or the SN pubkey.
*
* @param linger how long to allow the connection to linger while there are still pending
* outbound messages to it before disconnecting and dropping any pending messages. (Note that
* this lingering is internal; the disconnect() call does not block). The default is 1 second.
*
* If given a pubkey, we try to close an outgoing connection to the given SN if one exists; note
* however that this is often not particularly useful as messages to that SN can immediately
* reopen the connection.
*/
void disconnect(ConnectionID id, std::chrono::milliseconds linger = 1s);
/**
* Queue a message to be relayed to the given service node or remote without requiring a reply.
* OxenMQ will attempt to relay the message (first connecting and handshaking to the remote SN
* if not already connected).
*
* If a new connection is established it will have a relatively short (30s) idle timeout. If
* the connection should stay open longer you should either call `connect_sn(pubkey, IDLETIME)`
* or pass a a `send_option::keep_alive{IDLETIME}` in `opts`.
*
* Note that this method (along with connect) doesn't block waiting for a connection or for the
* message to send; it merely instructs the proxy thread that it should send. ZMQ will
* generally try hard to deliver it (reconnecting if the connection fails), but if the
* connection fails persistently the message will eventually be dropped.
*
* @param remote - either a ConnectionID value returned by connect_remote, or a service node
* pubkey string. In the latter case, sending the message may trigger a new
* connection being established to the service node (i.e. you do not have to
* call connect() first).
* @param cmd - the first data frame value which is almost always the remote "category.command" name
* @param opts - any number of std::string (or string_views) and send options. Each send option
* affects how the send works; each string becomes a message part. May also
* contain std::optional<T> values: the value will be applied as a string or send
* option if set and skipped if null.
*
* Example:
*
* // Send to a SN, connecting to it if we aren't already connected:
* omq.send(pubkey, "hello.world", "abc", send_option::hint("tcp://localhost:1234"), "def");
*
* // Start connecting to a remote and immediately queue a message for it
* auto conn = omq.connect_remote("tcp://127.0.0.1:1234",
* [](ConnectionID) { std::cout << "connected\n"; },
* [](ConnectionID, string_view why) { std::cout << "connection failed: " << why << \n"; });
* omq.send(conn, "hello.world", "abc", "def");
*
* Both of these send the command `hello.world` to the given pubkey, containing additional
* message parts "abc" and "def". In the first case, if not currently connected, the given
* connection hint may be used rather than performing a connection address lookup on the pubkey.
*/
template <typename... T>
void send(ConnectionID to, std::string_view cmd, const T&... opts);
/** Send a command configured as a "REQUEST" command to a service node: the data parts will be
* prefixed with a random identifier. The remote is expected to reply with a ["REPLY",
* <identifier>, ...] message, at which point we invoke the given callback with any [...] parts
* of the reply.
*
* Like `send()`, a new connection to the service node will be established if not already
* connected.
*
* @param to - the pubkey string or ConnectionID to send this request to
* @param cmd - the command name
* @param callback - the callback to invoke when we get a reply. Called with a true value and
* the data strings when a reply is received, or false with error string(s) indicating the
* failure reason upon failure or timeout.
* @param opts - anything else (i.e. strings, send_options) is forwarded to send().
*
* Possible error data values:
* - ["TIMEOUT"] - we got no reply within the timeout window
* - ["UNKNOWNCOMMAND"] - the remote did not recognize the given request command
* - ["NO_REPLY_TAG"] - the invoked command is a request command but no reply tag was included
* - ["FORBIDDEN"] - the command requires an authorization level (e.g. Basic or Admin) that we
* do not have.
* - ["FORBIDDEN_SN"] - the command requires service node authentication, but the remote did not
* recognize us as a service node. You *may* want to retry the request a limited number of
* times (but do not retry indefinitely as that can be an infinite loop!) because this is
* typically also followed by a disconnection; a retried message would reconnect and
* reauthenticate which *may* result in picking up the SN authentication.
* - ["NOT_A_SERVICE_NODE"] - this command is only invokable on service nodes, and the remote is
* not running as a service node.
*/
template <typename... T>
void request(ConnectionID to, std::string_view cmd, ReplyCallback callback, const T&... opts);
/** Injects an external task into the oxenmq command queue. This is used to allow connecting
* non-OxenMQ requests into the OxenMQ thread pool as if they were ordinary requests, to be
* scheduled as commands of an individual category. For example, you might support rpc requests
* via OxenMQ as `rpc.some_command` and *also* accept them over HTTP. Using `inject_task()`
* allows you to handle processing the request in the same thread pool with the same priority as
* `rpc.*` commands.
*
* @param category - the category name that should handle the request for the purposes of
* scheduling the job. The category must have been added using add_category(). The category
* can be an actual category with added commands, in which case the injected tasks are queued
* along with OMQ requests for that category, or can have no commands to set up a distinct
* category for the injected jobs.
*
* @param command - a command name; this is mainly used for debugging and does not need to
* actually exist (and, in fact, is often less confusing if it does not). It is recommended for
* clarity purposes to use something that doesn't look like a typical command, for example
* "(http)".
*
* @param remote - some free-form identifier of the remote connection. For example, this could
* be a remote IP address. Can be blank if there is nothing suitable.
*
* @param callback - the function to call from a worker thread when the injected task is
* processed. Takes no arguments.
*/
void inject_task(const std::string& category, std::string command, std::string remote, std::function<void()> callback);
/// The key pair this OxenMQ was created with; if empty keys were given during construction then
/// this returns the generated keys.
const std::string& get_pubkey() const { return pubkey; }
const std::string& get_privkey() const { return privkey; }
/** Updates (or initially sets) OxenMQ's list of service node pubkeys with the given list.
*
* This has two main effects:
*
* - All commands processed after the update will have SN status determined by the new list.
* - All outgoing connections to service nodes that are no longer on the list will be closed.
* This includes both explicit connections (established by `connect_sn()`) and implicit ones
* (established by sending to a SN that wasn't connected).
*
* As this update is potentially quite heavy it is recommended that this be called only when
* necessary--i.e. when the list has changed (or potentially changed), but *not* on a short
* periodic timer.
*
* This method may (and should!) be called before start() to load an initial set of SNs.
*
* Once a full list has been set, updates on changes can either call this again with the new
* list, or use the more efficient update_active_sns() call if incremental results are
* available.
*/
void set_active_sns(pubkey_set pubkeys);
/** Updates the list of active pubkeys by adding or removing the given pubkeys from the existing
* list. This is more efficient when the incremental information is already available; if it
* isn't, simply call set_active_sns with a new list to have OxenMQ figure out what was added or
* removed.
*
* \param added new pubkeys that were added since the last set_active_sns or update_active_sns
* call.
*
* \param removed pubkeys that were removed from active SN status since the last call. If a
* pubkey is in both `added` and `removed` for some reason then its presence in `removed` will
* be ignored.
*/
void update_active_sns(pubkey_set added, pubkey_set removed);
/**
* Batches a set of jobs to be executed by workers, optionally followed by a completion function.
*
* Must include oxenmq/batch.h to use.
*/
template <typename R>
void batch(Batch<R>&& batch);
/**
* Queues a single job to be executed with no return value. This is a shortcut for creating and
* submitting a single-job, no-completion-function batch job.
*
* \param f the callback to invoke
* \param thread an optional tagged thread in which this job should run. You may *not* pass the
* proxy thread here.
*/
void job(std::function<void()> f, std::optional<TaggedThreadID> = std::nullopt);
/**
* Adds a timer that gets scheduled periodically in the job queue. Normally jobs are not
* double-booked: that is, a new timed job will not be scheduled if the timer fires before a
* previously scheduled callback of the job has completed. If you want to override this (so
* that, under heavy load or long jobs, there can be more than one of the same job scheduled or
* running at a time) then specify `squelch` as `false`.
*
* The returned value can be kept and later passed into `cancel_timer()` if you want to be able
* to cancel a timer.
*
* \param thread specifies a thread (added with add_tagged_thread()) on which this timer must run.
*/
TimerID add_timer(std::function<void()> job, std::chrono::milliseconds interval, bool squelch = true, std::optional<TaggedThreadID> = std::nullopt);
/** Same as add_timer, above, except that it sets `timer` directly before adding the timer
* rather than returning it.
*
* This is recommended over the above in cases where the timer is extremely fast *and*
* cancellation will occur inside the job itself. This version of the method guarantees that
* `timer` will be assigned to before the job is added to the job schedule so as to guarantee
* that `job` can safely use `timer` without needing to synchronize the assignment with the
* thread creating the timer.
*
* If in doubt and you need to cancel a job from within the job itself, use this method.
*
* Example usage:
*
* auto timer = std::make_shared<TimerID>();
* auto& timer_ref = *timer; // Get reference before we move away the shared_ptr
* omq.add_timer(timer_ref, [timer=std::move(timer)] { ...; cancel_timer(*timer); });
*/
void add_timer(TimerID& timer, std::function<void()> job, std::chrono::milliseconds interval, bool squelch = true, std::optional<TaggedThreadID> = std::nullopt);
/**
* Cancels a running timer. Note that an existing timer job (or multiple, if the timer disabled
* squelch) that have already been scheduled may still be executed after cancel_timer is called.
*
* It is safe (though does nothing) to call this more than once with the same TimerID value.
*
* \param timer a TimerID value as returned by add_timer.
*/
void cancel_timer(TimerID timer);
};
/// Helper class that slightly simplifies adding commands to a category.
///
/// This allows simplifying:
///
/// omq.add_category("foo", ...);
/// omq.add_command("foo", "a", ...);
/// omq.add_command("foo", "b", ...);
/// omq.add_request_command("foo", "c", ...);
///
/// to:
///
/// omq.add_category("foo", ...)
/// .add_command("a", ...)
/// .add_command("b", ...)
/// .add_request_command("b", ...)
/// ;
class CatHelper {
OxenMQ& omq;
std::string cat;
public:
CatHelper(OxenMQ& omq, std::string cat) : omq{omq}, cat{std::move(cat)} {}
CatHelper& add_command(std::string name, OxenMQ::CommandCallback callback) {
omq.add_command(cat, std::move(name), std::move(callback));
return *this;
}
CatHelper& add_request_command(std::string name, OxenMQ::CommandCallback callback) {
omq.add_request_command(cat, std::move(name), std::move(callback));
return *this;
}
};
/// Namespace for options to the send() method
namespace send_option {
template <typename InputIt>
struct data_parts_impl {
InputIt begin, end;
data_parts_impl(InputIt begin, InputIt end) : begin{std::move(begin)}, end{std::move(end)} {}
};
/// Specifies an iterator pair of data parts to send, for when the number of arguments to send()
/// cannot be determined at compile time. The iterator pair must be over strings or string_view (or
/// something convertible to a string_view).
template <typename InputIt, typename = std::enable_if_t<std::is_convertible_v<decltype(*std::declval<InputIt>()), std::string_view>>>
data_parts_impl<InputIt> data_parts(InputIt begin, InputIt end) { return {std::move(begin), std::move(end)}; }
/// Shortcut for send_option::data_parts(container.begin(), container.end())
template <typename Container>
auto data_parts(const Container& c) { return data_parts(c.begin(), c.end()); }
/// Specifies a connection hint when passed in to send(). If there is no current connection to the
/// peer then the hint is used to save a call to the SNRemoteAddress to get the connection location.
/// (Note that there is no guarantee that the given hint will be used or that a SNRemoteAddress call
/// will not also be done.)
struct hint {
std::string connect_hint;
// Constructor taking a hint. If the hint is an empty string then no hint will be used.
explicit hint(std::string connect_hint) : connect_hint{std::move(connect_hint)} {}
};
/// Does a send() if we already have a connection (incoming or outgoing) with the given peer,
/// otherwise drops the message.
struct optional {
bool is_optional = true;
// Constructor; default construction gives you an optional, but the bool parameter can be
// specified as false to explicitly make a connection non-optional instead.
explicit optional(bool opt = true) : is_optional{opt} {}
};
/// Specifies that the message should be sent only if it can be sent on an existing incoming socket,
/// and dropped otherwise.
struct incoming {
bool is_incoming = true;
// Constructor; default construction gives you an incoming-only, but the bool parameter can be
// specified as false to explicitly disable incoming-only behaviour.
explicit incoming(bool inc = true) : is_incoming{inc} {}
};
/// Specifies that the message must use an outgoing connection; for messages to a service node the
/// message will be delivered over an existing outgoing connection, if one is established, and a new
/// outgoing connection opened to deliver the message if none is currently established. For non-SN
/// messages, the message will simply be dropped if it is attempting to be sent on an incoming
/// socket, and send otherwise on an outgoing socket (this option is primarily aimed at SN
/// messages).
struct outgoing {
bool is_outgoing = true;
// Constructor; default construction gives you an outgoing-only, but the bool parameter can be
// specified as false to explicitly disable the outgoing-only flag.
explicit outgoing(bool out = true) : is_outgoing{out} {}
};
/// Specifies the idle timeout for the connection - if a new or existing outgoing connection is used
/// for the send and its current idle timeout setting is less than this value then it is updated.
///
/// A negative value is treated as if the option were not supplied at all.
struct keep_alive {
std::chrono::milliseconds time;
explicit keep_alive(std::chrono::milliseconds time) : time{std::move(time)} {}
};
/// Specifies the amount of time to wait before triggering a failure callback for a request. If a
/// request reply arrives *after* the failure timeout has been triggered then it will be dropped.
/// (This has no effect if specified on a non-request() call). Note that requests failures are only
/// processed in the CONN_CHECK_INTERVAL timer, so it can be up to that much longer than the time
/// specified here before a failure callback is invoked.
///
/// Specifying a negative timeout is equivalent to not specifying the option at all.
struct request_timeout {
std::chrono::milliseconds time;
explicit request_timeout(std::chrono::milliseconds time) : time{std::move(time)} {}
};
/// Specifies a callback to invoke if the message couldn't be queued for delivery. There are
/// generally two failure modes here: a full queue, and a send exception. This callback is invoked
/// for both; to only catch full queues see `queue_full` instead.
///
/// A full queue means there are too many messages queued for delivery already that haven't been
/// delivered yet (i.e. because the remote is slow); this error is potentially recoverable if the
/// remote end wakes up and receives/acknoledges its messages.
///
/// A send exception is not recoverable: it indicates some failure such as the remote having
/// disconnected or an internal send error.
///
/// This callback can be used by a caller to log, attempt to resend, or take other appropriate
/// action.
///
/// Note that this callback is *not* exhaustive for all possible send failures: there are failure
/// cases (such as when a message is queued but the connection fails before delivery) that do not
/// trigger this failure at all; rather this callback only signals an immediate queuing failure.
struct queue_failure {
using callback_t = std::function<void(const zmq::error_t* exc)>;
/// Callback; invoked with nullptr for a queue full failure, otherwise will be set to a copy of
/// the raised exception.
callback_t callback;
};
/// This is similar to queue_failure_callback, but is only invoked on a (potentially recoverable)
/// full queue failure. Send failures are simply dropped.
struct queue_full {
using callback_t = std::function<void()>;
callback_t callback;
};
}
/// Namespace for options to the connect_remote()/connect_sn() methods
namespace connect_option {
/// Specifies whether the connection should use pubkey-based routing for this connection, overriding
/// the default (OxenMQ::EPHEMERAL_ROUTING_ID). See OxenMQ::EPHEMERAL_ROUTING_ID for a description
/// of this.
///
/// Typically use: `connect_option::ephemeral_routing_id{}` or `connect_option::ephemeral_routing_id{false}`.
struct ephemeral_routing_id {
bool use_ephemeral_routing_id = true;
// Constructor; default construction gives you ephemeral routing id, but the bool parameter can
// be specified as false to use pubkey routing flag.
explicit ephemeral_routing_id(bool use = true) : use_ephemeral_routing_id{use} {}
};
/// Sets the connection timeout (instead of the default REMOTE_CONNECT_TIMEOUT). Only applies to
/// connect_remote(), not connect_sn().
struct timeout {
std::chrono::milliseconds time;
explicit timeout(std::chrono::milliseconds time) : time{std::move(time)} {}
};
/// Sets the connection keep-alive (only applies to connect_sn(), not connect_remote()). The
/// connection will be kept alive if there was valid activity within the past `keep_alive`
/// milliseconds. If an outgoing connection already exists, the longer of the existing and the
/// given keep alive is used.
///
/// A negative value is treated as if the keep_alive option had not been specified.
///
/// Note that, if not specified, the default keep-alive for a connection established via
/// connect_sn() is 5 minutes (which is much longer than the default for an implicit connect() by
/// calling send() directly with a pubkey.)
struct keep_alive {
std::chrono::milliseconds time;
explicit keep_alive(std::chrono::milliseconds time) : time{std::move(time)} {}
};
/// Sets a remote address hint for an outgoing SN connection (only applies to connect_sn()). If a
/// new outgoing connection needs to be made this hint value may be used instead of calling the
/// lookup function. (Note that there is no guarantee that the hint will be used; it is only
/// usefully specified if the connection address has already been incidentally determined to save a
/// potentially expensive lookup call).
struct hint {
std::string address;
// Constructor taking a hint. If the hint is an empty string then no hint will be used.
explicit hint(std::string_view address) : address{address} {}
};
}
namespace detail {
/// Takes an rvalue reference, moves it into a new instance then returns a uintptr_t value
/// containing the pointer to be serialized to pass (via oxenmq queues) from one thread to another.
/// Must be matched with a deserializer_pointer on the other side to reconstitute the object and
/// destroy the intermediate pointer.
template <typename T>
uintptr_t serialize_object(T&& obj) {
static_assert(std::is_rvalue_reference<decltype(obj)>::value, "serialize_object must be given an rvalue reference");
auto* ptr = new T{std::forward<T>(obj)};
return reinterpret_cast<uintptr_t>(ptr);
}
/// Takes a uintptr_t as produced by serialize_pointer and the type, converts the serialized value
/// back into a pointer, moves it into a new instance (to be returned) and destroys the
/// intermediate.
template <typename T> T deserialize_object(uintptr_t ptrval) {
auto* ptr = reinterpret_cast<T*>(ptrval);
T ret{std::move(*ptr)};
delete ptr;
return ret;
}
// Sends a control message to the given socket consisting of the command plus optional dict
// data (only sent if the data is non-empty).
void send_control(zmq::socket_t& sock, std::string_view cmd, std::string data = {});
/// Base case: takes a string-like value and appends it to the message parts
inline void apply_send_option(oxenc::bt_list& parts, oxenc::bt_dict&, std::string_view arg) {
parts.emplace_back(arg);
}
/// std::optional<T>: if the optional is set, we unwrap it and apply as a send_option, otherwise we
/// ignore it.
template <typename T>
inline void apply_send_option(oxenc::bt_list& parts, oxenc::bt_dict& control_data, const std::optional<T>& opt) {
if (opt) apply_send_option(parts, control_data, *opt);
}
/// `data_parts` specialization: appends a range of serialized data parts to the parts to send
template <typename InputIt>
void apply_send_option(oxenc::bt_list& parts, oxenc::bt_dict&, const send_option::data_parts_impl<InputIt> data) {
for (auto it = data.begin; it != data.end; ++it)
parts.emplace_back(*it);
}
/// `hint` specialization: sets the hint in the control data
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::hint& hint) {
if (hint.connect_hint.empty()) return;
control_data["hint"] = hint.connect_hint;
}
/// `optional` specialization: sets the optional flag in the control data
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::optional& o) {
control_data["optional"] = o.is_optional;
}
/// `incoming` specialization: sets the incoming-only flag in the control data
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::incoming& i) {
control_data["incoming"] = i.is_incoming;
}
/// `outgoing` specialization: sets the outgoing-only flag in the control data
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::outgoing& o) {
control_data["outgoing"] = o.is_outgoing;
}
/// `keep_alive` specialization: increases the outgoing socket idle timeout (if shorter)
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::keep_alive& timeout) {
if (timeout.time >= 0ms)
control_data["keep_alive"] = timeout.time.count();
}
/// `request_timeout` specialization: set the timeout time for a request
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, const send_option::request_timeout& timeout) {
if (timeout.time >= 0ms)
control_data["request_timeout"] = timeout.time.count();
}
/// `queue_failure` specialization
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, send_option::queue_failure f) {
control_data["send_fail"] = serialize_object(std::move(f.callback));
}
/// `queue_full` specialization
inline void apply_send_option(oxenc::bt_list&, oxenc::bt_dict& control_data, send_option::queue_full f) {
control_data["send_full_q"] = serialize_object(std::move(f.callback));
}
/// Extracts a pubkey and auth level from a zmq message received on a *listening* socket.
std::pair<std::string, AuthLevel> extract_metadata(zmq::message_t& msg);
template <typename... T>
oxenc::bt_dict build_send(ConnectionID to, std::string_view cmd, T&&... opts) {
oxenc::bt_dict control_data;
oxenc::bt_list parts{{cmd}};
(detail::apply_send_option(parts, control_data, std::forward<T>(opts)),...);
if (to.sn())
control_data["conn_pubkey"] = std::move(to.pk);
else {
control_data["conn_id"] = to.id;
control_data["conn_route"] = std::move(to.route);
}
control_data["send"] = std::move(parts);
return control_data;
}
inline void apply_connect_option(OxenMQ& omq, bool remote, oxenc::bt_dict& opts, const AuthLevel& auth) {
if (remote) opts["auth_level"] = static_cast<std::underlying_type_t<AuthLevel>>(auth);
else omq.log(LogLevel::warn, __FILE__, __LINE__, "AuthLevel ignored for connect_sn(...)");
}
inline void apply_connect_option(OxenMQ&, bool, oxenc::bt_dict& opts, const connect_option::ephemeral_routing_id& er) {
opts["ephemeral_rid"] = er.use_ephemeral_routing_id;
}
inline void apply_connect_option(OxenMQ& omq, bool remote, oxenc::bt_dict& opts, const connect_option::timeout& timeout) {
if (remote) opts["timeout"] = timeout.time.count();
else omq.log(LogLevel::warn, __FILE__, __LINE__, "connect_option::timeout ignored for connect_sn(...)");
}
inline void apply_connect_option(OxenMQ& omq, bool remote, oxenc::bt_dict& opts, const connect_option::keep_alive& ka) {
if (ka.time < 0ms) return;
else if (!remote) opts["keep_alive"] = ka.time.count();
else omq.log(LogLevel::warn, __FILE__, __LINE__, "connect_option::keep_alive ignored for connect_remote(...)");
}
inline void apply_connect_option(OxenMQ& omq, bool remote, oxenc::bt_dict& opts, const connect_option::hint& hint) {
if (hint.address.empty()) return;
if (!remote) opts["hint"] = hint.address;
else omq.log(LogLevel::warn, __FILE__, __LINE__, "connect_option::hint ignored for connect_remote(...)");
}
[[deprecated("use oxenmq::connect_option::keep_alive or ::timeout instead")]]
inline void apply_connect_option(OxenMQ&, bool remote, oxenc::bt_dict& opts, std::chrono::milliseconds time) {
if (remote) opts["timeout"] = time.count();
else opts["keep_alive"] = time.count();
}
[[deprecated("use oxenmq::connect_option::hint{hint} instead of a direct string argument")]]
inline void apply_connect_option(OxenMQ& omq, bool remote, oxenc::bt_dict& opts, std::string_view hint) {
if (!remote) opts["hint"] = hint;
else omq.log(LogLevel::warn, __FILE__, __LINE__, "string argument ignored for connect_remote(...)");
}
} // namespace detail
template <typename... Option>
ConnectionID OxenMQ::connect_remote(const address& remote, ConnectSuccess on_connect, ConnectFailure on_failure,
const Option&... options) {
oxenc::bt_dict opts;
(detail::apply_connect_option(*this, true, opts, options), ...);
auto id = next_conn_id++;
opts["conn_id"] = id;
opts["connect"] = detail::serialize_object(std::move(on_connect));
opts["failure"] = detail::serialize_object(std::move(on_failure));
if (remote.curve()) opts["pubkey"] = remote.pubkey;
opts["remote"] = remote.zmq_address();
detail::send_control(get_control_socket(), "CONNECT_REMOTE", oxenc::bt_serialize(opts));
return id;
}
template <typename... Option>
ConnectionID OxenMQ::connect_sn(std::string_view pubkey, const Option&... options) {
oxenc::bt_dict opts{
{"keep_alive", std::chrono::microseconds{DEFAULT_CONNECT_SN_KEEP_ALIVE}.count()},
{"ephemeral_rid", EPHEMERAL_ROUTING_ID},
};
(detail::apply_connect_option(*this, false, opts, options), ...);
opts["pubkey"] = pubkey;
detail::send_control(get_control_socket(), "CONNECT_SN", oxenc::bt_serialize(opts));
return pubkey;
}
template <typename... Option>
ConnectionID OxenMQ::connect_inproc(ConnectSuccess on_connect, ConnectFailure on_failure,
const Option&... options) {
oxenc::bt_dict opts{
{"timeout", INPROC_CONNECT_TIMEOUT.count()},
{"auth_level", static_cast<std::underlying_type_t<AuthLevel>>(AuthLevel::admin)}
};
(detail::apply_connect_option(*this, true, opts, options), ...);
auto id = next_conn_id++;
opts["conn_id"] = id;
opts["connect"] = detail::serialize_object(std::move(on_connect));
opts["failure"] = detail::serialize_object(std::move(on_failure));
opts["remote"] = "inproc://sn-self";
detail::send_control(get_control_socket(), "CONNECT_REMOTE", oxenc::bt_serialize(opts));
return id;
}
template <typename... T>
void OxenMQ::send(ConnectionID to, std::string_view cmd, const T&... opts) {
detail::send_control(get_control_socket(), "SEND",
oxenc::bt_serialize(detail::build_send(std::move(to), cmd, opts...)));
}
std::string make_random_string(size_t size);
template <typename... T>
void OxenMQ::request(ConnectionID to, std::string_view cmd, ReplyCallback callback, const T &...opts) {
const auto reply_tag = make_random_string(15); // 15 random bytes is lots and should keep us in most stl implementations' small string optimization
oxenc::bt_dict control_data = detail::build_send(std::move(to), cmd, reply_tag, opts...);
control_data["request"] = true;
control_data["request_callback"] = detail::serialize_object(std::move(callback));
control_data["request_tag"] = std::string_view{reply_tag};
detail::send_control(get_control_socket(), "SEND", oxenc::bt_serialize(std::move(control_data)));
}
template <typename... Args>
void Message::send_back(std::string_view command, Args&&... args) {
oxenmq.send(conn, command, send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
template <typename... Args>
void Message::DeferredSend::back(std::string_view command, Args&&... args) const {
oxenmq.send(conn, command, send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
template <typename... Args>
void Message::send_reply(Args&&... args) {
assert(!reply_tag.empty());
oxenmq.send(conn, "REPLY", reply_tag, send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
template <typename... Args>
void Message::DeferredSend::reply(Args&&... args) const {
assert(!reply_tag.empty());
oxenmq.send(conn, "REPLY", reply_tag, send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
template <typename Callback, typename... Args>
void Message::send_request(std::string_view cmd, Callback&& callback, Args&&... args) {
oxenmq.request(conn, cmd, std::forward<Callback>(callback),
send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
template <typename Callback, typename... Args>
void Message::DeferredSend::request(std::string_view cmd, Callback&& callback, Args&&... args) const {
oxenmq.request(conn, cmd, std::forward<Callback>(callback),
send_option::optional{!conn.sn()}, std::forward<Args>(args)...);
}
// When log messages are invoked we strip out anything before this in the filename:
constexpr std::string_view LOG_PREFIX{"oxenmq/", 7};
inline std::string_view trim_log_filename(std::string_view local_file) {
auto chop = local_file.rfind(LOG_PREFIX);
if (chop != local_file.npos)
local_file.remove_prefix(chop);
return local_file;
}
template <typename... T>
void OxenMQ::log(LogLevel lvl, const char* file, int line, const T&... stuff) {
if (log_level() < lvl || !logger)
return;
std::ostringstream os;
(os << ... << stuff);
logger(lvl, trim_log_filename(file).data(), line, os.str());
}
std::ostream &operator<<(std::ostream &os, LogLevel lvl);
} // namespace oxenmq
// vim:sw=4:et
Reference in New Issue View Git Blame Copy Permalink