session-ios/SignalServiceKit/tests/Messages/OWSMessageManagerTest.m

187 lines
7.0 KiB
Mathematica
Raw Normal View History

//
// Copyright (c) 2018 Open Whisper Systems. All rights reserved.
//
2018-09-20 18:53:03 +02:00
#import "OWSMessageManager.h"
#import "ContactsManagerProtocol.h"
#import "ContactsUpdater.h"
2018-09-20 18:53:03 +02:00
#import "MockSSKEnvironment.h"
#import "OWSFakeCallMessageHandler.h"
#import "OWSFakeContactsManager.h"
#import "OWSFakeMessageSender.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
#import "OWSFakeNetworkManager.h"
#import "OWSIdentityManager.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
#import "OWSMessageSender.h"
#import "OWSPrimaryStorage.h"
2018-09-11 00:43:17 +02:00
#import "SSKBaseTest.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
#import "TSGroupThread.h"
#import "TSNetworkManager.h"
2018-09-25 19:09:55 +02:00
#import <SignalCoreKit/Cryptography.h>
2018-09-20 18:53:03 +02:00
#import <SignalServiceKit/SignalServiceKit-Swift.h>
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
NS_ASSUME_NONNULL_BEGIN
2018-09-20 18:53:03 +02:00
@interface OWSMessageManager (Testing)
// Private init for stubbing dependencies
- (instancetype)initWithNetworkManager:(TSNetworkManager *)networkManager
storageManager:(OWSPrimaryStorage *)storageManager
callMessageHandler:(id<OWSCallMessageHandler>)callMessageHandler
contactsManager:(id<ContactsManagerProtocol>)contactsManager
contactsUpdater:(ContactsUpdater *)contactsUpdater
identityManager:(OWSIdentityManager *)identityManager
messageSender:(OWSMessageSender *)messageSender;
// private method we are testing
2018-09-07 23:01:27 +02:00
- (void)handleIncomingEnvelope:(SSKProtoEnvelope *)messageEnvelope withSyncMessage:(SSKProtoSyncMessage *)syncMessage;
2018-09-07 23:01:27 +02:00
- (void)handleIncomingEnvelope:(SSKProtoEnvelope *)messageEnvelope withDataMessage:(SSKProtoDataMessage *)dataMessage;
@end
2018-09-20 18:53:03 +02:00
#pragma mark -
@interface OWSMessageManagerTest : SSKBaseTest
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
@end
2018-09-20 18:53:03 +02:00
#pragma mark -
2018-09-20 18:53:03 +02:00
@implementation OWSMessageManagerTest
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2017-06-04 03:29:41 +02:00
- (void)setUp
{
[super setUp];
}
2018-09-20 18:53:03 +02:00
#ifdef BROKEN_TESTS
- (void)testIncomingSyncContactMessage
{
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
XCTestExpectation *messageWasSent = [self expectationWithDescription:@"message was sent"];
2018-09-20 18:53:03 +02:00
OWSAssert([SSKEnvironment.shared.messageSender isKindOfClass:[OWSFakeMessageSender class]]);
OWSFakeMessageSender *fakeMessageSender = (OWSFakeMessageSender *)SSKEnvironment.shared.messageSender;
fakeMessageSender.enqueueTemporaryAttachmentBlock = ^{
[messageWasSent fulfill];
};
OWSMessageManager *messagesManager = OWSMessageManager.sharedManager;
2018-09-07 23:01:27 +02:00
SSKProtoSyncMessageRequestBuilder *requestBuilder = [SSKProtoSyncMessageRequestBuilder new];
[requestBuilder setType:SSKProtoSyncMessageRequestTypeGroups];
2018-09-20 18:53:03 +02:00
SSKProtoSyncMessageBuilder *messageBuilder = [SSKProtoSyncMessageBuilder new];
[messageBuilder setRequest:[requestBuilder buildIgnoringErrors]];
SSKProtoEnvelopeBuilder *envelopeBuilder = [SSKProtoEnvelopeBuilder new];
[envelopeBuilder setType:SSKProtoEnvelopeTypeCiphertext];
[envelopeBuilder setSource:@"+13213214321"];
[envelopeBuilder setSourceDevice:1];
[envelopeBuilder setTimestamp:12345];
[messagesManager handleIncomingEnvelope:[envelopeBuilder buildIgnoringErrors]
withSyncMessage:[messageBuilder buildIgnoringErrors]];
[self waitForExpectationsWithTimeout:5
handler:^(NSError *error) {
NSLog(@"No message submitted.");
}];
}
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
- (void)testGroupUpdate
{
NSData *groupIdData = [Cryptography generateRandomBytes:32];
NSString *groupThreadId = [TSGroupThread threadIdFromGroupId:groupIdData];
TSGroupThread *groupThread = [TSGroupThread fetchObjectWithUniqueID:groupThreadId];
XCTAssertNil(groupThread);
2018-09-20 18:53:03 +02:00
OWSMessageManager *messagesManager = SSKEnvironment.shared.messageManager;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoEnvelopeBuilder *envelopeBuilder = [SSKProtoEnvelopeBuilder new];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoGroupContextBuilder *groupContextBuilder = [SSKProtoGroupContextBuilder new];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
groupContextBuilder.name = @"Newly created Group Name";
groupContextBuilder.id = groupIdData;
2018-09-07 23:01:27 +02:00
groupContextBuilder.type = SSKProtoGroupContextTypeUpdate;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoDataMessageBuilder *messageBuilder = [SSKProtoDataMessageBuilder new];
2018-09-20 18:53:03 +02:00
messageBuilder.group = [groupContextBuilder buildIgnoringErrors];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-20 18:53:03 +02:00
[messagesManager handleIncomingEnvelope:[envelopeBuilder buildIgnoringErrors]
withDataMessage:[messageBuilder buildIgnoringErrors]];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
groupThread = [TSGroupThread fetchObjectWithUniqueID:groupThreadId];
XCTAssertNotNil(groupThread);
XCTAssertEqualObjects(@"Newly created Group Name", groupThread.name);
}
- (void)testGroupUpdateWithAvatar
{
NSData *groupIdData = [Cryptography generateRandomBytes:32];
NSString *groupThreadId = [TSGroupThread threadIdFromGroupId:groupIdData];
TSGroupThread *groupThread = [TSGroupThread fetchObjectWithUniqueID:groupThreadId];
XCTAssertNil(groupThread);
2018-09-20 18:53:03 +02:00
OWSMessageManager *messagesManager = SSKEnvironment.shared.messageManager;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoEnvelopeBuilder *envelopeBuilder = [SSKProtoEnvelopeBuilder new];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoGroupContextBuilder *groupContextBuilder = [SSKProtoGroupContextBuilder new];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
groupContextBuilder.name = @"Newly created Group with Avatar Name";
groupContextBuilder.id = groupIdData;
2018-09-07 23:01:27 +02:00
groupContextBuilder.type = SSKProtoGroupContextTypeUpdate;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoAttachmentPointerBuilder *attachmentBuilder = [SSKProtoAttachmentPointerBuilder new];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
attachmentBuilder.id = 1234;
attachmentBuilder.contentType = @"image/png";
attachmentBuilder.key = [NSData new];
attachmentBuilder.size = 123;
2018-09-20 18:53:03 +02:00
groupContextBuilder.avatar = [attachmentBuilder buildIgnoringErrors];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-07 23:01:27 +02:00
SSKProtoDataMessageBuilder *messageBuilder = [SSKProtoDataMessageBuilder new];
2018-09-20 18:53:03 +02:00
messageBuilder.group = [groupContextBuilder buildIgnoringErrors];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
2018-09-20 18:53:03 +02:00
[messagesManager handleIncomingEnvelope:[envelopeBuilder buildIgnoringErrors]
withDataMessage:[messageBuilder buildIgnoringErrors]];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
groupThread = [TSGroupThread fetchObjectWithUniqueID:groupThreadId];
XCTAssertNotNil(groupThread);
XCTAssertEqualObjects(@"Newly created Group with Avatar Name", groupThread.name);
}
- (void)testUnknownGroupMessageIsIgnored
{
NSData *groupIdData = [Cryptography generateRandomBytes:32];
2018-09-20 18:53:03 +02:00
TSGroupThread *groupThread = [TSGroupThread getOrCreateThreadWithGroupId:groupIdData];
// Sanity check
XCTAssertEqual(0, groupThread.numberOfInteractions);
2018-09-20 18:53:03 +02:00
OWSMessageManager *messagesManager = SSKEnvironment.shared.messageManager;
2018-09-07 23:01:27 +02:00
SSKProtoEnvelopeBuilder *envelopeBuilder = [SSKProtoEnvelopeBuilder new];
2018-09-07 23:01:27 +02:00
SSKProtoGroupContextBuilder *groupContextBuilder = [SSKProtoGroupContextBuilder new];
groupContextBuilder.name = @"Newly created Group with Avatar Name";
groupContextBuilder.id = groupIdData;
// e.g. some future feature sent from another device that we don't yet support.
groupContextBuilder.type = 666;
2018-09-07 23:01:27 +02:00
SSKProtoDataMessageBuilder *messageBuilder = [SSKProtoDataMessageBuilder new];
2018-09-20 18:53:03 +02:00
messageBuilder.group = [groupContextBuilder buildIgnoringErrors];
2018-09-20 18:53:03 +02:00
[messagesManager handleIncomingEnvelope:[envelopeBuilder buildIgnoringErrors]
withDataMessage:[messageBuilder buildIgnoringErrors]];
XCTAssertEqual(0, groupThread.numberOfInteractions);
}
2018-09-20 18:53:03 +02:00
#endif
@end
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
2016-10-14 23:00:29 +02:00
NS_ASSUME_NONNULL_END