#########
## Config for pirate-box WWW Release
##  written by Matthias Strubel  (matthias.strubel@aod-rpg.de) (c)2011-2014 
##  licenced under the GPL-3 ; feel free to improve or send me feedback
########
## Configuration help
##    If you plan to use one laptop as the piratebox:
##        Set DO_IFCONFIG , USE_APN, USE_DNSMASQ to yes
##    If you plan to run a two component setup (one router and one providing the storage+website)
##     connected with ethernet:
##        Set DO_IFCONFIG , USE_APN, USE_DNSMASQ  to no
##        Configure your ethernet eth0 (or whatever) to a static IP
##        force your router to publish the  HOST Option with your static IP; in case of dnsmasq add the /etc/hosts entrys 
##        Have a look at http://www.piratebox.cc for futher instructions
##    
##    You may deactivated severall option as needed. It's flexible.


#----------------- Folder Configuration  -------------------#

PIRATEBOX_FOLDER="/opt/piratebox"
WWW_FOLDER="/opt/piratebox/www"

#Do not change untill really needed.
PIRATEBOX_PYTHONPATH="$PIRATEBOX_FOLDER/python_lib"


#Datafolder  , where is you usb-stick // drive mounted
SHARE_FOLDER="$PIRATEBOX_FOLDER/share"

#Upload Folder
# Change this if you want to user uploaded data in a subfolder
#   Make sure the folder exists
# UPLOADFOLDER="$SHARE_FOLDER/Upload"
UPLOADFOLDER="$SHARE_FOLDER/Shared"

#----------------- Startup Configuration  -------------------#
# Which Steps has to be done

#Do network config 
DO_IFCONFIG="yes"

#Do IW config - setting up a wlan0 interface with iw
#  for some wifi-cards required
DO_IW="no"
#Iw physical interface  
PHY_IF="phy0"

# Check if interface exists
#  should be set to yes if you use a USB wifi card
PROBE_INTERFACE="no"
#  wait how many seconds until throw an error
PROBE_TIME=10

#Start services...
#   act like a apn  / <yes|no>
#    please have a look @ hostapd.conf ; you may need to change some options, regarding wifi-card 
USE_APN="yes"
#   act like dns&dhcp (dnsmasq) 
USE_DNSMASQ="yes"

#HOSTNAME  ... if you really want to change it, plz change:
#   www/index.html
#
#   That is the Domain-Specifi part, where you reach always the local box
HOST="piratebox.lan"

#----------------- Configuration for DNSMASQ & IF-Setup  -------------------#
# Name of the wlan interface
INTERFACE="wlan0"
# On which interface DNSMASQ should listen. -i is the parameter for dnsmasq
# Make it empty to disable
DNSMASQ_INTERFACE="wlan0"

#Brdige add interface (setr yes to enable bridging)
DO_BRIDGE="no" 
BRIDGE="br-lan"

#Network
NET=192.168.77

#IP-SHORT (is stringed together)
#  What IP does your Box have??  i.e. 1 => 192.168.77.1
IP_SHORT=1

#DHCP LEASE Start
START_LEASE=10
#DHCP LEASE End Range
END_LEASE=250
#Leasetime  (When should the client renew it's IP)
LEASE_DURATION=12h

# Where is the leasefile stored to?
LEASE_FILE_LOCATION=$PIRATEBOX_FOLDER/tmp/lease.file


# Define the netmask
NETMASK=255.255.255.0

#SET IP for ifconfig stuff - DON'T CHANGE
IP=$NET.$IP_SHORT 

#Load Config about ipv6 stuff - DON'T CHANGE
 . $PIRATEBOX_FOLDER/conf/ipv6.conf


#--------------------------------------------------------------------------#
# Node-Config path

NODE_CONFIG="$PIRATEBOX_FOLDER/conf/node.conf"

#----------------- Configuration for the pure piratebox -------------------#
## droopy, webserver, shoutbox- and forum-server 

## Timesave file for non-RTC devices
TIMESAVE="$PIRATEBOX_FOLDER/share/timesave_file"

#On non OpenWRT you can use the default output format
# as an input format. For OpenWrt you need to specify +%C%g%m%d%H%M
# The content is exchanged during makefile processing and image build
TIMESAVE_FORMAT=""

#Start droopy? - Enable upload?
DROOPY_ENABLED="yes"
#Image-SRC
IMAGENAME="piratebox-logo-small.png"
IMAGE="$PIRATEBOX_FOLDER/src/$IMAGENAME"
DROOPY_TXT=""
DROOPY_PORT="8080"
# Set correct permissions for an uploaded file
DROOPY_CHMOD="755"
DROOPY_USERDIR=""
# Uncomment line below for adding directory feature
#DROOPY_USERDIR=" -u True "

#Use UserId from lighttpd for droopy  (use on ext-filesystems)
DROOPY_USE_USER="yes"

#Configuration for chat  (If you decide to move the chat folder, you have to change /opt/piratebox/chat/cgi-bin/py* files )
CHATFILE="$WWW_FOLDER/cgi-bin/data.pso"

#Generated File
GEN_CHATFILE="$WWW_FOLDER/chat_content.html"

#Generated File for DiskUsage
GEN_DISKFILE="$WWW_FOLDER/diskusage.html"

# Reset Shoutbox on Startup?
RESET_CHAT="yes"

### Shoutbox is enabled. 
# When you set this option to "no", then the shoutbox file is not writable anymore
#   and in the json file the module is disabled. You should adjust the chat_init.txt 
#   to make clear, that the box is not working anymore.
SHOUTBOX_ENABLED="yes"

SHOUTBOX_CLIENT_TIMESTAMP="no"

#Inititiation Chat-Message
### This option was removed, you can find the chat message in conf/chat_init.txt

#Provide files needed for PirateBox custom dirlisting
CUSTOM_DIRLIST_COPY="yes"

#Generate config json for frontend
PBX_JSON_GENERATION="yes"
PBX_JSON_FILE="$WWW_FOLDER/piratebox_config.json"

#Activate Global chat
# Still experimentall!
GLOBAL_CHAT="no"

#On which broadcast address should it send
#  Take care on the syntax!!
GLOBAL_DEST="[ #255.255.255.255# , #10.255.255.255# , #$NET.255# ]"

#------------------------ Additional configuration for lighttpd 
LIGHTTPD_USER=nobody
LIGHTTPD_GROUP=nogroup


#------------------------ IRC Configuration

#Switch to yes if you want to enable the IRC-Server
ENABLE_IRC_SERVER="no"

#------------------------ Hook in user-config
.  $PIRATEBOX_FOLDER/conf/hook_custom.conf