pybatmesh/README.md

224 lines
6.7 KiB
Markdown
Raw Normal View History

2021-05-10 10:06:30 +02:00
# naxalnet
**naxalnet** is a program to create a wireless mesh network for
communicating with each other. It can be useful during an
[internet shutdown][], or to join online classes with a group of laptops.
It uses [B.A.T.M.A.N. Advanced][batman-adv], an implementation
of the B.A.T.M.A.N. routing protocol to communicate with peers.
WARNING:
This program uses an unencrypted network. This means,
you do not get any more privacy or security than with an open wifi
network.
<!-- NOTE TO ACTIVISTS
Running this program in the world's largest partly free democracy
may result in you getting arrested under the UAPA, and not
getting bail because of false evidence planted in your phone by
Pegasus, or by a forensic lab in Gujarat.
The author, not unlike the Government of India, does not wish
to take responsibility in your well-being if you get arrested under
a draconian national security law, which was once used to arrest
a person involved in the freedom struggle against British Raj.
-->
2021-05-10 11:45:42 +02:00
The name naxal comes from Naxalbari, a village in Darjeeling,
West Bengal.
<!-- UNCOMMENT WHEN NECESSARY
**Disclaimer**:
In case you are either 1) a complete idiot; or 2) a member of the saffron
brigade; or 3) both, please be aware that this project is not affiliated
with any groups designated as "terrorist" groups in India.
2021-05-10 11:45:42 +02:00
Using the name Naxal does not imply any form of connection
with anyone currently at risk of death in overcrowded prisons.
2021-05-10 11:45:42 +02:00
-->
## Requirements
2021-07-29 19:14:01 +02:00
- [systemd v248 or more][batman-systemd]
- Linux kernel with batman-adv module
2021-07-29 19:14:01 +02:00
- [iwd][]
2021-06-07 06:17:35 +02:00
- python3
- python-setuptools (for building)
- [python-dasbus][]
- wifi adapter with ad-hoc support
2021-07-29 19:14:01 +02:00
- two or more computers, or laptops with wifi adapter, called nodes
- systemd-resolved (optional, for DNS)
- batctl (optional, for debugging)
2021-05-10 11:45:42 +02:00
## Installing
### Arch Linux
Install [naxalnet][aur] (or [naxalnet-git][aur-devel] for the
development version) from the AUR with your favourite helper:
```sh
yay -S naxalnet
```
2021-06-19 09:10:08 +02:00
Optionally, [setup systemd-resolved][arch-resolved] for DNS if any
of the nodes have internet access.
### Manually
Clone the repo and cd into it.
```sh
git clone https://git.disroot.org/pranav/naxalnet.git
cd naxalnet
```
Or, if you have an [IPFS client][ipfs] running, try:
```sh
git clone http://k51qzi5uqu5dlye74be0n9iihwk6sm54vexo7bf7pdr4w811y6mmrcp25djozv.ipns.localhost:8080/naxalnet.git
```
Run `sudo make install` to install naxalnet.
After installing, reload systemd so that you can enable `naxalnet.service`
without rebooting:
```sh
sudo systemctl daemon-reload
2021-05-10 11:45:42 +02:00
```
## How to use
2021-05-10 11:45:42 +02:00
You need more than one computer running for the connection to work.
### Start naxalnet
To start naxalnet, do the command on all the nodes:
2021-05-10 11:45:42 +02:00
```sh
sudo systemctl start naxalnet.service
```
2021-05-10 11:45:42 +02:00
To test if it works, run `ip -c addr` to find out your address.
Note the `inet` address of `bridge0`. If there isn't one, try again
after a few seconds. If the address starts with 169.254, it has
2021-07-29 19:14:01 +02:00
got a link-local address. Otherwise, it has got an IP address
from DHCP.
### Getting internet access
Connect an ethernet cable to any of the peers and
[start naxalnet][startnx]. Now all the peers should
be able to connect after renewing their DHCP connection
(`sudo networkctl renew bridge0`).
### Tethering via WiFi AP
If there are two adapters in a peer, naxalnet will start a
wifi ap (wifi hotspot) on one of them.
Connect two wifi adapters on a device and [start naxalnet][startnx].
Now an ap will be created on one of the adapters with
SSID `NaxalNet` and password `naxalnet256`.
If you had set up internet access on one of the peers, internet
can be accessed from the AP.
### Running at boot
Starting the service will stop `NetworkManager.service` and
`wpa_supplicant.service` if it is running. If you start either of these
services after naxalnet was started, systemd will stop naxalnet.
To run naxalnet at boot, enable the service on all the nodes:
```sh
sudo systemctl enable naxalnet.service
2021-05-10 11:45:42 +02:00
```
2021-05-10 11:45:42 +02:00
Now naxalnet will configure a batman interface on every boot.
Disable the service to stop running at boot:
```sh
sudo systemctl disable naxalnet.service
```
### Stopping the service
```sh
# Stop the services
sudo systemctl stop naxalnet systemd-networkd systemd-resolved iwd
# Delete the virtual interfaces created by naxalnet
sudo networkctl delete bat0 bridge0
```
If your distribution uses NetworkManager, starting `naxalnet.service`
will have stopped it. Start NetworkManager again:
```sh
sudo systemctl start NetworkManager.service
```
## How it works
The program naxalnet copies some `systemd-networkd` configuration files
into networkd's runtime configuration directory. It uses iwd to start
an ad-hoc network named "HelloWorld". See the
[systemd-networkd](systemd-networkd) directory
to see how systemd-networkd configures the network. You can use
services like [IPFS][], [Jami][], [Secure Scuttlebutt][ssb]
and others which can work on an intranet.
2021-05-10 11:45:42 +02:00
2021-05-11 08:46:32 +02:00
## Uninstalling
If you installed naxalnet manually, there is no way to uninstall
than manually removing the files:
```sh
sudo pip uninstall naxalnet
sudo rm -rf /usr/share/naxalnet* /usr/lib/systemd/system/naxalnet.service
```
2021-07-26 12:38:36 +02:00
## Contributing
See [HACKING.md](HACKING.md)
2021-06-19 09:10:08 +02:00
## Similar projects
The following projects are similar to naxalnet, but are not designed
to be used in a laptop or computer with wifi adapter. If you live in
an area where the materials required for any of them are easily
available, consider using them instead of naxalnet.
2021-06-19 09:10:08 +02:00
- [LibreMesh][libremesh]: framework for OpenWrt-based
firmwares
- [disaster.radio][]: solar-powered communications network
## License
This program is [free/libre/swatantra][free-sw] software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
See [LICENSE](LICENSE) for the complete version of the
license.
[batman-adv]: https://www.open-mesh.org/projects/batman-adv/wiki
[internet shutdown]: https://internetshutdowns.in
[ipfs]: https://ipfs.io "InterPlanetary File System"
[jami]: https://jami.net "Peer to peer video calls"
[ssb]: https://scuttlebutt.nz "Secure Scuttlebutt"
[python-dasbus]: https://github.com/rhinstaller/dasbus "A python D-Bus library"
[aur]: https://aur.archlinux.org/packages/naxalnet
[aur-devel]: https://aur.archlinux.org/packages/naxalnet-git
[arch-resolved]: https://wiki.archlinux.org/title/Systemd-resolved#DNS "systemd-resolved on ArchWiki"
[batman-systemd]: https://www.open-mesh.org/news/101 "systemd v248 brings support for batman advanced"
2021-06-19 09:10:08 +02:00
[libremesh]: https://libremesh.org
[disaster.radio]: https://disaster.radio
[startnx]: #start-naxalnet
2021-07-29 19:14:01 +02:00
[iwd]: https://iwd.wiki.kernel.org "wifi daemon"
[free-sw]: https://gnu.org/philosophy/free-sw.html "What is free software?"