docs: improve description of uwsgi & ngingx setup

Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
This commit is contained in:
Markus Heiser 2020-03-06 14:47:00 +01:00
parent cbc08fdc26
commit 387c6a7769
11 changed files with 182 additions and 83 deletions

View File

@ -1,5 +1,5 @@
.. _searx_filtron:
.. _searx filtron:
==========================
How to protect an instance
@ -8,6 +8,8 @@ How to protect an instance
.. sidebar:: further reading
- :ref:`filtron.sh`
- :ref:`nginx searx site`
.. contents:: Contents
:depth: 2
@ -150,6 +152,8 @@ of:
]
.. _filtron route request:
Route request through filtron
=============================
@ -167,12 +171,14 @@ Use it along with ``nginx`` with the following example configuration.
.. code:: nginx
location / {
proxy_pass http://127.0.0.1:4004/;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_pass http://127.0.0.1:4004/;
}
Requests are coming from port 4004 going through filtron and then forwarded to
port 8888 where a searx is being run.
port 8888 where a searx is being run. For a complete setup see: :ref:`nginx
searx site`.

View File

@ -12,6 +12,12 @@ Install with nginx
http://nginx.org/en/docs/beginners_guide.html
.. _Getting Started wiki:
https://www.nginx.com/resources/wiki/start/
.. _uWSGI support from nginx:
https://uwsgi-docs.readthedocs.io/en/latest/Nginx.html
.. _uwsgi_params:
https://uwsgi-docs.readthedocs.io/en/latest/Nginx.html#configuring-nginx
.. _SCRIPT_NAME:
https://werkzeug.palletsprojects.com/en/1.0.x/wsgi/#werkzeug.wsgi.get_script_name
.. contents:: Contents
:depth: 2
@ -98,8 +104,8 @@ see a *Fedora Webserver - Test Page*. The test page comes from the default
.. _nginx searx site:
A searx site
============
A nginx searx site
==================
.. sidebar:: public to the internet?
@ -134,33 +140,42 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
.. tabs::
.. group-tab:: searx via filtron plus morty
.. group-tab:: filtron at ``/`` & ``/morty``
Use this setup, if your instance is public to the internet:
Use this setup, if your instance is public to the internet, compare
figure: :ref:`architecture <arch public>`. Configure a reverse proxy for
:ref:`filtron <filtron.sh>`, listening on *localhost 4004* (:ref:`filtron
route request`):
.. code:: nginx
location / {
proxy_pass http://127.0.0.1:4004/;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_pass http://127.0.0.1:4004/;
}
Configure reverse proxy for :ref:`morty <searx morty>`, listening on
*localhost 3000*:
.. code:: nginx
location /morty {
proxy_pass http://127.0.0.1:3000/;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_pass http://127.0.0.1:3000/;
}
For a fully result proxification add :ref:`morty's <searx_morty>` public
URL to your :origin:`searx/settings.yml`:
Note that reverse proxy advised to be used in case of single-user or
low-traffic instances. For a fully result proxification add :ref:`morty's
<searx morty>` **public URL** to your :origin:`searx/settings.yml`:
.. code:: yaml
@ -169,38 +184,98 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
url : http://searx.example.com/
.. group-tab:: searx at ``/``
.. group-tab:: proxy or uWSGI
Use this setup only, if your instance is **NOT** public to the internet:
Be warned, with this setup, your Instance isn't :ref:`protected <searx
filtron>`. Nevertheless it is good enough for intranet usage and it is a
excellent example of; *how different services can be set up*. The next
example shows a reverse proxy configuration wrapping the :ref:`searx-uWSGI
application <uwsgi configuration>`, listening on ``http =
127.0.0.1:8888``.
.. code:: nginx
location / {
proxy_pass http://127.0.0.1:8888;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_set_header X-Script-Name /searx;
proxy_buffering off;
}
Alternatively you can use the `uWSGI support from nginx`_ via unix
sockets. For socket communication, you have to activate ``socket =
/run/uwsgi/app/searx/socket`` and comment out the ``http =
127.0.0.1:8888`` configuration in your :ref:`uwsgi ini file <uwsgi
configuration>`.
The example shows a nginx virtual ``server`` configuration, listening on
port 80 (IPv4 and IPv6 http://[::]:80). The uWSGI app is configured at
location ``/`` by importing the `uwsgi_params`_ and passing requests to
the uWSGI socket (``uwsgi_pass``). The ``server``\'s root points to the
:ref:`searx-src clone <searx-src>` and wraps directly the
:origin:`searx/static/` content at ``location /static``.
.. code:: nginx
server {
listen 80;
listen [::]:80;
# replace searx.example.com with your server's public name
server_name searx.example.com;
root /usr/local/searx/searx;
location /static {
}
listen 80;
listen [::]:80;
location / {
include uwsgi_params;
uwsgi_pass unix:/run/uwsgi/app/searx/socket;
}
root /usr/local/searx/searx-src/searx;
location /static { }
}
.. group-tab:: searx at ``/searx``
If not already exists, create a folder for the unix sockets, which can be
used by the searx account:
Use this setup only, if your instance is **NOT** public to the internet:
.. code:: bash
mkdir -p /run/uwsgi/app/searx/
sudo -H chown -R searx:searx /run/uwsgi/app/searx/
.. group-tab:: subdirectory URL
Be warned, with these setups, your Instance isn't :ref:`protected <searx
filtron>`. The examples are just here to demonstrate how to export the
searx application from a subdirectory URL
http://searx.example.com/searx/\.
.. code:: nginx
location /searx {
proxy_pass http://127.0.0.1:8888;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_set_header X-Script-Name /searx;
proxy_buffering off;
}
location /searx/static {
alias /usr/local/searx/searx-src/searx/static;
}
The ``X-Script-Name /searx`` is needed by the searx implementation to
calculate relative URLs correct. The next example shows a uWSGI
configuration. Since there are no HTTP headers in a (u)WSGI protocol, the
value is shipped via the SCRIPT_NAME_ in the WSGI environment.
.. code:: nginx
location /searx/static {
alias /usr/local/searx/searx/static;
alias /usr/local/searx/searx-src/searx;
}
location /searx {
@ -209,26 +284,8 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
uwsgi_pass unix:/run/uwsgi/app/searx/socket;
}
**OR** using reverse proxy. Please, note that reverse proxy advised to be
used in case of single-user or low-traffic instances.
.. code:: nginx
location /searx/static {
alias /usr/local/searx/searx/static;
}
location /searx {
proxy_pass http://127.0.0.1:8888;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Scheme $scheme;
proxy_set_header X-Script-Name /searx;
proxy_buffering off;
}
Enable ``base_url`` in :origin:`searx/settings.yml`
For searx to work correctly the ``base_url`` must be set in the
:origin:`searx/settings.yml`.
.. code:: yaml
@ -246,21 +303,21 @@ Restart service:
.. code:: sh
sudo -H systemctl restart nginx
sudo -H systemctl restart uwsgi
sudo -H service uwsgi restart searx
.. group-tab:: Arch Linux
.. code:: sh
sudo -H systemctl restart nginx
sudo -H systemctl restart uwsgi
sudo -H systemctl restart uwsgi@searx
.. group-tab:: Fedora
.. code:: sh
sudo -H systemctl restart nginx
sudo -H systemctl restart uwsgi
sudo -H touch /etc/uwsgi.d/searx.ini
Disable logs

View File

@ -32,6 +32,8 @@ Create user
:start-after: START create user
:end-before: END create user
.. _searx-src:
install searx & dependencies
============================

View File

@ -92,6 +92,8 @@ could control specific instance(s) by issuing::
My experience is, that this command is a bit buggy.
.. _uwsgi configuration:
Alltogether
===========

View File

@ -1,5 +1,5 @@
.. _searx_morty:
.. _searx morty:
=========================
How to setup result proxy

View File

@ -8,7 +8,7 @@
.. sidebar:: further reading
- :ref:`installation`
- :ref:`searx_filtron`
- :ref:`searx filtron`
- :ref:`architecture`
.. _Go: https://golang.org/
@ -64,6 +64,7 @@ To install searx in your public HTTP server use:
$ sudo -H a2enmod proxy
$ sudo -H a2enmod proxy_http
.. _filtron.sh overview:
Overview
========

View File

@ -26,7 +26,7 @@ into this user account.
.. hint::
To add morty to your searx instance read chapter :reF:`searx_morty`.
To add morty to your searx instance read chapter :ref:`searx morty`.
Overview

View File

@ -881,6 +881,7 @@ uWSGI_enable_app() {
mkdir -p "${uWSGI_APPS_ENABLED}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
ln -s "${uWSGI_APPS_AVAILABLE}/${CONF}" "${uWSGI_APPS_ENABLED}/${CONF}"
systemctl enable "uwsgi@${CONF%.*}"
info_msg "enabled uWSGI app: ${CONF} (restart required)"
;;
fedora-*)

View File

@ -88,7 +88,7 @@ usage() {
usage::
$(basename "$0") shell
$(basename "$0") install [all|user|searx-src|pyenv|apache]
$(basename "$0") install [all|user|searx-src|pyenv|uwsgi|apache]
$(basename "$0") update [searx]
$(basename "$0") remove [all|user|pyenv|searx-src]
$(basename "$0") activate [service]
@ -104,6 +104,7 @@ install / remove
:user: add/remove service user '$SERVICE_USER' ($SERVICE_HOME)
:searx-src: clone $SEARX_GIT_URL
:pyenv: create/remove virtualenv (python) in $SEARX_PYENV
:uwsgi: install searx uWSGI application
:settings: reinstall settings from ${REPO_ROOT}/searx/settings.yml
update searx
Update searx installation ($SERVICE_HOME)
@ -165,6 +166,7 @@ main() {
pyenv) create_pyenv ;;
searx-src) clone_searx ;;
settings) install_settings ;;
uwsgi) install_searx_uwsgi;;
*) usage "$_usage"; exit 42;;
esac ;;
update)

View File

@ -57,10 +57,24 @@ virtualenv = ${SEARX_PYENV}
pythonpath = ${SEARX_SRC}
# plugin http
# -----------
# speak to upstream
# -----------------
#
# Activate the 'http' configuration for filtron or activate the 'socket'
# configuration if you setup your HTTP server to use uWSGI protocol via sockets.
# using IP:
#
# https://uwsgi-docs.readthedocs.io/en/latest/Options.html#plugin-http
# Native HTTP support: https://uwsgi-docs.readthedocs.io/en/latest/HTTP.html
http = ${SEARX_INTERNAL_URL}
# using unix-sockets:
#
# On some distributions you need to create the app folder for the sockets::
#
# mkdir -p /run/uwsgi/app/searx/socket
# chmod -R ${SERVICE_USER}:${SERVICE_GROUP} /run/uwsgi/app/searx/socket
#
# socket = /run/uwsgi/app/searx/socket

View File

@ -56,10 +56,24 @@ virtualenv = ${SEARX_PYENV}
pythonpath = ${SEARX_SRC}
# plugin http
# -----------
# speak to upstream
# -----------------
#
# Activate the 'http' configuration for filtron or activate the 'socket'
# configuration if you setup your HTTP server to use uWSGI protocol via sockets.
# using IP:
#
# https://uwsgi-docs.readthedocs.io/en/latest/Options.html#plugin-http
# Native HTTP support: https://uwsgi-docs.readthedocs.io/en/latest/HTTP.html
http = ${SEARX_INTERNAL_URL}
# using unix-sockets:
#
# On some distributions you need to create the app folder for the sockets::
#
# mkdir -p /run/uwsgi/app/searx/socket
# chmod -R ${SERVICE_USER}:${SERVICE_GROUP} /run/uwsgi/app/searx/socket
#
# socket = /run/uwsgi/app/searx/socket