that is bundled with VMware Workstation 5.5 fails to suspend, warns
on poweron/resume.
Bump PORTREVISION for both vmware-tools5 and vmware-guestd5.
PR: 90488
Submitted by: NIIMI Satoshi
commands that are dependent on the host machine architecture.
This fixes installation failure on amd64 in some circumstances.
PR: ports/80679 [1], ports/90252 [2]
Submitted by: OMATSU Shinichiro <koma2@lovepeers.org> [1]
Torfinn Ingolfsen <tingo@start.no> [2]
Approved by: emulation (maintainer, timeout 7 months)
The manual page of doscmd (man doscmd) still states the
following:
"and then typing make install in the source directory (nor-
mally /usr/src/usr.bin/doscmd). For this to work, the X
programmer's kit must have been installed."
However doscmd is no longer part of the base system. So it
should should say "/usr/ports/emulators/doscmd" instead.
PR: ports/79661
Submitted by: arundel <arundel@h3c.de>
Approved by: maintainer timeout
- don't remove nsswitch.conf if modified [1]
- utilize the new "store GPLed sources" feature [2]
- use a master site which carries the files
Submitted by: Ulrich Spoerlein <q@galgenberg.net> [1]
Requested by: kris [2]
revision number. It may help to avoid unwanted version bump to
vmware-tools5 if vmware-guestd5 specific changes are happen to
vmware-guestd5/Makefile.
Since no content changes at this time, no bump.
VMware Workstation FreeBSD-guest related ports for VMware Workstation
5.5.0 build 18463.
New features are:
- Spell "VMware Workstation" appropriately.
There are much VMware products, it would be the time that I have
to spell VMware Workstation as VMware Workstation.
- Support FreeBSD/amd64 since 64-bit binaries are provided from VMware.
I don't test any of 64-bit related portion, since I have no
FreeBSD/amd64 machine. If something trouble please email me.
- New variable "WITH_VMWARE_GTK" (emulators/vmware-tools5)
Install gtk version of VMware Tools if defined
(add more dependencies on other gtk-related ports)
- New variable "WITH_VMWARE_VMXNET" (emulators/vmware-guestd5)
Install "vmxnet.ko" kernel module (vmxnet driver) if defined
Usage:
- shutdown FreeBSD guest VM
- add following line to FreeBSD guest VM config file
Ethernet0.virtualDev="vmxnet"
- Boot FreeBSD guest VM
- load vmxnet.ko kernel module
- ifconfig vxn0 ...
New rc.conf variable "vmware_guest_vmxnet_enable" is also added
to vmware-guestd.sh to load kernel module at startup. However,
${PREFIX}/etc/rc.d/vmware-guestd.sh run _after_ /etc/rc.d/netif,
so it maybe too late to load here...
Note that vmxnet.ko supports FreeBSD 4.8-RELEASE or later, and
5.3-RELEASE and later (as VMware said). I've confirmed that
recent 7-current got 100% instant panic if vmxnet.ko is loaded.
- "vmware_guest_kmod_enable" is renamed to "vmware_guest_vmmemctl_enable"
Now this ports has two kernel modules now, old name is not
appropriate one, hard to understand this variable is for which
kernel module. I also put backward compatibility code, but users
of vmware_guest_kmod_enable please change variable name.
Bugfixes are:
- Resolve conflicts on ${PREFIX}/share/vmware-tools.
Unfortunately both vmware-guestd5 and vmware-tools5 installs
files to ${PREFIX}/share/vmware-tools directory. Since this
directory is only for vmware-tools, vmware-guestd5 doesn't do
anything for now.
- WWW: line in pkg-descr points bogus page.
- Add note that there's official VMware Tools installer, and what is the
difference between the two.
Finally, as usual, bump PORTVERSION.
Leverage SUB_FILES instead of literal sed to handle /etc/rc.d/000.wine.sh
and pkg-message, which allows us to remove the post-extract target and
fixes the long standing issue of showing the correct prefix in pkg-message.
PR: 88492
Submitted by: Andrew Pantyukhin <infofarmer@gmail.com>
empty tarballs. Add ibiblio.org as an alternative download site and make
it the default for now.
Inspired by ports/89442 by Andrew P. <infofarmer@gmail.com>.
Note: this port sets RESTRICTED because the Neo-Geo BIOS
must be downloaded manually and can not be redistributed.
So ports/LEGAL should be updated. These are the file names:
"neo-geo.rom", "ng-lo.rom", "ng-sfix.rom", and "ng-sm1.rom".
These files are also listed in the "NGBIOS" variable in the
Makefile of the port.
GnGeo is a NeoGeo emulator for Linux (and maybe some other
UNIX). It use the following cpu core:
* The 68k core from the generator project by James Ponder.
* Starscream 680x0 emulation library by Neill Corlett
* Raze Z80 emulator by Richard Mitton.
* Z80 Mame core from the Mame project.
* YM2610 Mame core by Tatsuyuki Satoh.
WWW: http://m.peponas.free.fr/gngeo/
PR: ports/85327
Submitted by: Alejandro Pulver <alejandro@varnet.biz>
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- WRKSRC is predefined, no need to redefine it.
- Use pre-build instead of post-configure.
- Rely on the default do-install target, and use post-install for
our additional changes.
- $PREFIX/etc/wine.conf and .wine/config are no longer used; remove
all references from pkg-message.
PR: 88758
Submitted by: Andrew Pantyukhin <infofarmer@gmail.com>
Unfortunately this requires a port epoch, and also uses bzip2 now.
PR: 88492
Submitted by: Andrew Pantyukhin <infofarmer@gmail.com>
Approved by: gerald (maintainer)?
commit tries to solve this by adding some @exec calls into the plist.
Add a pkg-deinstall script with appropriate content which was previously
in pkg-install (ouch). [1]
PR: 82625 [1]
Submitted by: Boris B. Samorodov <bsam ipt ru>
Mark IGNORE when system < 5.3 (don't have fmin(3) and fmax(3) functions)
PR: 87269 [1]
Submitted by: Janos Mohacsi <janos.mohacsi@niif.hu> (maintainer)
- don't generate the plist at install time, use a static plist instead
(this fixes the empty plist after the change to pre-su-install) [1]
- brand _every_ ELF executable in {,usr/}{,s}bin/
(short command line, should be used by other linux ports with a lot of
files too; contrary to the commit messages of some linux ports: brandelf
is usefull and doesn't result in foot-shooting in edge cases)
- install directly into the destination instead of bouncing through WRKSRC
Noticed by: marcus [1]
Pointy hat to: netchild [1]
- Update xmess to 0.100 [2]
- Remove old stuffs about xpinmame port
- Use DATADIR and DOCSDIR
- Mark it as BROKEN on < 5.x (maintainer will take a look asap)
PR: ports/86526 [1], ports/86533 [2]
Submitted by: maintainer
Reworked by: me
Approved by: maintainer
Temporarily disable building wldap32 due to a build problem introduced
directly before the release. Reenable winetest which we had to disable
for similar reasons back in late 2003.
P2000 Emulator
- P2000T or P2000M model (P2000M emulation is buggy)
- Support for 1 ROM cartridge
- User-definable amount of RAM
- One tape drive
- Sound through PC Speaker or SoundBlaster (MS-DOS version), or
USS(/Lite) /dev/dsp (Linux/SVGALib and Unix/X versions)
- SAA5050 character rounding emulated in high resolution mode
The tape files should be writable, otherwise the emulator won't load them.
WWW: http://www.komkon.org/~dekogel/m2000.html
PR: ports/85263
Submitted by: Edwin Groothuis <edwin@mavetju.org>
integrated simulation environment in Linux and Windows. SkyEye environment
simulates typical Embedded Computer Systems (Now it supports Atmel AT91 board
based on ARM7TDMI CPU, board based on ARM720T CPU, board based on StrongARM
(SA1100/SA1110). You can run some Embedded Operation System such as ARM Linux,
uClinux, uc/O
PR: ports/83770
Submitted by: Ruan Wei <iamayan@gmail.com>
config file and several man pages.
Add a dependency on graphics/lcms which is not strictly needed, but
allows for additional functionality when present.
I assume the maintainer overlooked this port in the patchset, since
he already committed a similar change to another port and didn't
objected to any patch in the patchset. So I take a shortcut and just
commit the patch instead of further delaying the move from linux_mesa3
to linux_dri.
Submitted by: Ulrich Spoerlein <spoerlein@informatik.uni-wuerzburg.de>
Approved by: maintainer timeout (a week and a half)
Merge /dev/kqemu cloning support to kmod_bsd.c (Craig Boston),
Giant-lock kqemu (Bakul Shah), Utilize BSDMakefile to compile
kqemu.ko, and cosmetic change (Norikatsu Shigemura)
See more info in ports/83691 for full ChangeLog.
PR: ports/83691
Submitted by: Juergen Lock <nox@jelal.kn-bremen.de> (maintainer)
Pete's XGL2 GPU is a PSEmu Pro GPU plugin using a hardware-accelerated
modern OpenGL renderer.
This is the Linux version, tested with emulators/linux-ePSXe.
WWW: http://www.pbernert.com/
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
