- Fix LICENSE and set it to MIT
- Fix the way we handle the terminfo of x11/sterm. FreeBSD 12,
11-STABLE, and 11.2-RELEASE do not require any additional
configuration (thanks to bapt@) [1]. For older versions, there is a
simple set of instructions on how to configure terminfo for x11/sterm
in pkg-message.
- Create a symbolic link to user-defined config.h instead of making a
copy as is done in other suckless.org ports such as x11-wm/dwm and
www/quark.
- Respect CPPFLAGS
- Add some files to DOCS and DATA
- Eliminate an unnecessary .for loop during install
- Use HTTPS in WWW
- Add UPDATING entry as old config.h files will need to be updated for
the newer version
[1] https://svnweb.freebsd.org/changeset/base/331006
Changes: https://git.suckless.org/st/log/?qt=range&q=0.7..0.8
PR: 226632
Submitted by: 0mp
Approved by: Piotr Kubaj <pkubaj@anongoth.pl> (maintainer)
Ports using USES=php:phpize, php:ext, php:zend, and php:pecl are now
flavored. They will automatically get flavors (php56, php70, php71, php72)
depending of the versions they support (set with IGNORE_WITH_PHP). As a
consequence, ports using USES=pear and USES=horde are also flavored.
PR: 226242
Submitted by: mat
Exp-run by: antoine
Approved by: portmgr
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D14208
After Emacs flavors were introduced, users have requested the ability to
specify a default flavor for the Emacs ports (editors/emacs and
editors/emacs-devel) in make.conf, so add an example to the 20180201 entry.
Approved by: ashish
Differential Revision: https://reviews.freebsd.org/D14555
- When no virtualhosts are defined, and the default localhost/localhost is
effective, the post-install script now adds DEFAULT_EMAIL_HOST,
DEFAULT_URL_HOST, and add_virtualhost() lines to mm_cfg.py.
Add corresponding support to remove unchanged configurations to the
deinstall script.
- While here, overhaul crontab configuration to only request a merge if the
crontab had been modified, and unify progress reports.
- Merge pkg-deinstall into pkg-install, to avoid duplication of code
that might be missed in later maintenance.
PR: 225961
Reported by: Terry Kennedy
* Update to 1.99.96.20130920.
* Switch master site to GitHub.
* Update LICENSE.
* Remove EMACS_FLAVORS_EXCLUDE because this version of Lookup can be built with editors/emacs-devel.
* Update description and WWW in pkg-descr.
* Add entry to UPDATING about incompatibility.
PR: 225748
Submitted by: yasu@utahime.org (maintainer)
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
This will ensure users who do not read UPDATING are still presented with
the message about how to allow clients to connect to the daemon using
DNS when they upgrade the package.
PR: 225150
Reported by: swills
Security: https://www.vuxml.org/freebsd/3e5b8bd3-0c32-452f-a60e-beab7b762351.html
actually any lighter---it's built with exactly the same feature-set as
the main vim port. The only difference is lack of gtk20 GUI, and the
language bindings are off by default.
An UPDATING entry is included.
to 2.2. The recommendation is just to use gpgme, but I'm including
a (neo)muttrc command from David Wolfskill for people who prefer to
roll their own.
Reported by: David Wolfskill
The introduction of flavors caused the awscli package to be renamed to
py27-awscli. Since this package is preinstalled on all AWS EC2 instances
running a FreeBSD image, apply POLA and rename the package back to
awscli. The assumption is that the rename was unintentional.
Approved by: mat (co-mentor)
MFH: 2018Q1
Differential Revision: https://reviews.freebsd.org/D13555
This update replaces the default resolver used by
dnscrypt-proxy (cisco/OpenDNS) by a random one that
does not log entries and supports dnssec.
- Improve pkg-message's.
- Fix MASTER_SITES.
- Reorder Makefile variable's.
- Update WWW.
PR: 223222
Submitted by: Vinícius Zavam <egypcio@googlemail.com>
Reviewed by: dbaio, garga, mat
Approved by: Leo Vandewoestijne <freebsd@dns-lab.com>
(maintainer, previous patch, then timeout)
Differential Revision: https://reviews.freebsd.org/D12775
- Make the guile2 flavor the new default. Users requiring guile1
can use that flavor
- Add note in UPDATING, since the default is changing
Reviewed by: mat
Approved by: portmgr (mat)
Differential Revision: https://reviews.freebsd.org/D13478
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464
Please note:
- Web's static dirs have moved to a single dedicated directory.
- Users should review webserver's /static configuration (examples in
share/examples/sympa).
PR: 223793
Submitted by: geoffroy desvernay <dgeo@centrale-marseille.fr> (maintainer)
Relnotes: https://github.com/sympa-community/sympa/blob/6.2.22/NEWS.md
The build currently fails when older netpbm version are still
installed in the build environment e.g. when upgrading from 10.35.98
to 10.80.00 the build fails with
ppmtompeg.o: In function `main':
ppmtompeg.c:(.text+0x9a5): undefined reference to `pm_strfree'
ppmtompeg.o: In function `getUserFrameFile':
ppmtompeg.c:(.text+0xcb1): undefined reference to `pm_asprintf'
ppmtompeg.c:(.text+0xcfb): undefined reference to `pm_strfree'
ppmtompeg.c:(.text+0xd04): undefined reference to `pm_strfree'
- Use explicit paths when linking with libnetpbm
- Remove UPDATING entry that previously recommended deinstalling
netpbm first when using portmaster/portupgrade
PR: 223724
