- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
- bsd.port.options.mk must be included before targets are defined
Reviewed by: feld (mentor)
Approved by: feld (mentor)
Differential Revision: D5479
MFH: 2016Q1
The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/
This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.
GDM is still at version 3.16 due to some issues.
Bump mate-themes to use the gtk 3.18 version of the themes.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 207006
The TERMCAP option avoided linking with libcurses (which is symlinked to
libncurses) in order to link with libtermcap (which is also symlinked to
libncurses).
Remove the TERMCAP option completely and link directly to libncurses in
any case.
PR: 206947
approved by: jpaetzel@ (maintainer)
The TERMCAP option avoided linking with libcurses (which is symlinked to
libncurses) in order to link with libtermcap (which is also symlinked to
libncurses).
Remove the TERMCAP option completely and link directly to libncurses in
any case.
PR: 206947
approved by: mp29590(gmail) (maintainer)
two typedefs (apparently, the latter was deprecated and finally removed
in 1.4.7):
typedef enum _imlib_load_error Imlib_Load_Error;
typedef enum _imlib_load_error ImlibLoadError;
- Instead of handling of VIDEO and CACA options interdependency manually,
define VIDEO_IMPLIES=CACA (available since r394573) and thus consummate
conversion to option helpers
- Install sample configuration files as @sample in pkg-plist (and convert
PLIST_FILES to separate file due to better readability thereof)
- Restore sane installation routine broken in r336927 and install couple
of extra documentation files while here
- Augment port description text and update WWW line to avoid redirect
cd /wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src && /usr/bin/c++ -I/usr/local/include/libpurple -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src -O2 -pipe -DX_DISPLAY_MISSING -fstack-protector -fno-strict-aliasing -DHAVE_IMLIB -DHAVE_CACA -DHAVE_PAM -D_REENTRANT -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wno-unused-parameter -O2 -pipe -DX_DISPLAY_MISSING -fstack-protector -fno-strict-aliasing -o CMakeFiles/minbif.dir/im/account.cpp.o -c /wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp
/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp: In member function 'void im::Account::setBuddyIcon(std::string)':
/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp:276: error: 'ImlibLoadError' was not declared in this scope
/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp:276: error: expected `;' before 'err'
/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp:281: error: 'err' was not declared in this scope
/wrkdirs/usr/ports/irc/minbif/work/minbif-1.0.5/src/im/account.cpp:287: error: 'err' was not declared in this scope
Reported by: pkg-fallout
MFH: 2016Q1
Fix default config file path to sample configs and add rc script chdir
so these relative paths work. This makes it easier to get a new install
up and running.
MFH: 2015Q4
Security: b808c3a8-ae30-11e5-b864-14dae9d210b8
A robust, full-featured Python IRC bot with a clean and flexible plugin API.
Equipped with a complete ACL system for specifying user permissions with as
much as per-command granularity. Batteries are included in the form of
numerous plugins already written.
WWW: https://github.com/ProgVal/Limnoria
Requested by: Brenden Molloy (via IRC)
bitlbee-facebook is a plugin that allows bitlbee to access Facebook. It uses
the MQTT protocol used by the Facebook messenger mobile client and also
supports group chats.
WWW: https://wiki.bitlbee.org/HowtoFacebookMQTT
- Remove AIM plugin support as it is no longer supported
- Bump PORTREVISION for package change
- While here, minor grammar changes in pkg-descr and Makefile
PR: 205260
Submitted by: cpet@bitchx.org (maintainer)
${PERL5} points to a specific version of perl, say, perl5.22.1, it is
fine to use it in a ports Makefile to do Perly things, but ports using
it must use ${PERL}, that points to /usr/local/bin/perl so that if the
minor version is updated, the shebang keep working.
While there, make some ports use shebangfix, regen a few patches, and
bump PORTREVISION where a shebang went from PERL5 to PERL.
PR: 205367
With hat: portmgr
Sponsored by: Absolight
It has its unique plugin system and various features oriented
towards ruby development tasks.
WWW: https://github.com/mose/cogbot
PR: ports/204759
Submitted by: mose <mose@gandi.net>
Changes in ircII 20151120:
o fix a program hang upon invalid utf-8 sequences
o /set log and /window log no longer double the output
o /lastlog no longer adds trailing ^Os to log files
2015-10-31 audio/cmus-post.fm: Broken for more than 6 months
2015-10-31 devel/libphish: Broken for more than 6 months
2015-10-31 devel/rubygem-debugger: This port is for Ruby 1.9 only. Upstream stopped maintenance.
2015-10-31 games/linux-ningpo-demo: Broken for more than 6 months
2015-10-30 graphics/gdal-grass: Superseded by gdal-2.0.0
2015-10-31 graphics/picviz: Broken for more than 6 months
2015-10-31 irc/weechat-devel: far behind stable irc/weechat (use it instead)
2015-10-31 mail/cucipop: Broken for more than 6 months
2015-10-31 math/rkward-kde4: Depends on deprecated math/R-cran-car
2015-10-31 multimedia/streamanalyze: Broken for more than 6 months
2015-10-31 net-mgmt/collectd: Please move to collectd5 - collect4 is not developed/patched
2015-10-31 sysutils/sdd: Broken for more than 6 months
2015-10-31 sysutils/xfce4-minicmd-plugin: Broken for more than 6 months
2015-10-31 www/linux-libgtkembedmoz: Broken for more than 6 months
2015-10-31 www/py-feedfinder: Broken for more than 6 months
2015-10-31 www/py-openssl-proxy: Broken for more than 6 months
2015-10-31 www/py-webware: Broken for more than 6 months
2015-10-31 www/py-webware-component: Depends on deprecated www/py-webware
2015-10-31 x11-fonts/code2001: Broken for more than 6 months
2015-10-31 x11-wm/e-module-diskio: Broken for more than 7 months
The weechat-devel port has been behind the stable weechat for a long
time and its presence has caused confusion. Rather than mark IGNORE
temporarily, set removal in motion because stable is updated so frequently
that there is no point to a -devel port
PR: 203169
Approved by: maintainer timeout
These were FreeBSD specific aliases for libiconv(), libiconv_open() and
libiconv_close() that are now also provided by libc which complicates
writing configure tests that work correctly when both libc iconv and
libiconv are available.
Also, because the libiconv iconv.h header redefines iconv* to libiconv*
correct use of the header implies that the aliases aren't used.
The following ports needed fixes because there was something wrong with
the way they tried to detect or use iconv:
audio/deadbeef: Remove LIBICONV_PLUG from a source file. It's a
compile-time option and should not be set in source code.
comms/hidapi: Use standard AM_ICONV configure macro to look for iconv.
deskutils/fbreader: Let ports framework deal with LIBICONV_PLUG.
deskutils/ljclive: Override configure test for iconv.
deskutils/owncloudclient: Add USES=iconv and patch test for iconv.
devel/aegis: Bump PORTREVISION because it no longer uses libiconv.
devel/libexplain: Add USES=iconv and override test for iconv.
devel/sdl20: Override configure test for iconv.
emulators/vmw: Replace OSVERSION checks with ICONV_LIB checks and include
<iconv.h> instead of <sys/iconv.h>.
irc/scrollz: Override configure test for iconv.
japanese/chasen-base: Override configure test for iconv and patch
configure so it no longer adds -liconv to linker flags just because it
happens to be installed.
japanses/eb: Patch configure test for iconv.
japanses/eblook: Override configure test for iconv.
java/jikes: Override configure test for iconv.
multimedia/transcode: Bump PORTREVISION because only one plugin links with
libiconv now.
net/c3270: Override configure test for iconv.
net/samba4*: Bump PORTREVISION because it no longer uses libiconv. The
configure script will always add -liconv to the linker flags when it
happens to be installed which would be wrong but later on binaries are
linked with -Wl,--as-needed and the linker discards -liconv because it
finds iconv*() functions in libc now and no longer in libiconv.
net-mgmt/icinga-*: Remove dependency on iconv.
net-mgmt/netxms: Patch configure so it no longer adds -liconv to linker
flags just because it happens to be installed.
net/asterisk11: Patch configure so it no longer adds -liconv to linker
flags just because it happens to be installed.
net-p2p/transmission-*: Override configure test for iconv.
www/htmlcxx: Override configure test for iconv.
www/httrack: Override configure test for iconv.
www/xapian-omega: Override configure test for iconv.
x11/mrxvt(-devel): Add USES=iconv and override configure test for iconv.
x11/x3270: Override configure test for iconv.
x11-wm/jwm: Override configure test for iconv.
PR: 202838
Exp-run by: antoine
Approved by: portmgr (antoine)
build plugins manually or possible plugin ports
- Instead of use --strip=0 and call STRIP_CMD later, let bitlbee build
scripts to strip binaries
- Bump PORTREVISION
- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
Though you should note that only the default version can be used to
install Perl modules, and the non default Perl versions cannot use the
modules installed via ports if they contain .so as they are installed
in a version specific directory.
Reviewed by: bapt (the Mk bits)
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3542
This port was recently redeclared "jobs safe", but we just hit another
jobs-safe issue on the chinese/bitchx slave port. In this case, it was
trying to link wserv beform all the object files were built.
The way we deal with iconv in base and ports across different FreeBSD
releases is complicated: 9.x does not have iconv.h in base, 10.1 has it with
a different prototype for iconv(3) and later versions have the right
iconv(3) prototype. And, in some cases (USES=iconv:{translit,wchar_t}), we
must always use the libiconv port.
This is why there are so many checks in Uses/iconv.mk: we need to know the
situation we currently have in order to decide whether to pull iconv from
converters/libiconv, whether to just use its header (and pull the library
from base) or whether to use everything from base.
r384038 adjusted several CMake-based ports, but did so in a way that was not
very scalable and required a few intrusive patches to some ports. Most ports
that have both USES=cmake and USES=iconv use variations of FindIconv.cmake
that behave similarly. This change passes the header and library values we
really want to use to CMake using the most common variable names, bypassing
the calls to find_path() and find_library() that would sometimes end up
finding the wrong file. The few ports that use different variable names have
had their Makefiles adjusted (we manually pass the values we want via
CMAKE_ARGS).
Other changes:
- chinese/fcitx: Explicitly set LIBICONV_LIBC_HAS_ICONV_OPEN=OFF as we
always want the version from ports because of USES=iconv:wchar_t.
- editors/calligra: Explicitly use iconv:translit because Kexi needs it.
- irc/weechat and irc/weechat-devel: The FindIconv.cmake patches could not
be entirely removed because the check_library_exists() calls are wrong.
Sent upstream: https://github.com/weechat/weechat/pull/513
- textproc/ctpp2: Use iconv:translit when the TRANSLITERATE option is used.
PORTREVISION has been bumped in editors/calligra and textproc/ctpp2 because
their dependency list has changed in 10.2 and later as the ports version is
always used now.
PR: 202798
Reviewed by: antoine, tijl
Approved by: portmgr (antoine)
Clean up portlint -C warnings do not mute install
Clean up QA reported error in staging
Correct upstream website in Makefile fetch and pkg-descr
No binary changes
UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.
Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.
Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)
Reviewed by: antoine, bapt
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3336
The offical GNOME 3.16 release notes can be found at https://help.gnome.org/misc/release-notes/3.16/
Upgrade instructions for port users:
Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 201980
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.
japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything. Just don't hide anything at all
like the textproc/scim configure script does.
multimedia/schroedinger: Apply an upstream patch.
textproc/scim-input-pad: Same as japanese/scim-honoka.
PR: 201922
Approved by: portmgr (antoine)
Exp-run by: antoine
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Fully strip binaries unless DEBUG enabled
Create /var dirs in rc script start_precmd instead of in package
Make rc script pass rclint
Upstream has accepted the LibreSSL patches but their releases are far
apart, so patching in ports tree for now.
PR: 198506
When using GH_TAGNAME the DISTNAME would have GH_PROJECT and GH_ACCOUNT in
it. When not using GH_TAGNAME it would not have this. Now both cases
will add in the GH_PROJECT and GH_ACCOUNT.
Add special care to ensure that the DISTVERSION is not added in twice. If
a port does GH_TAGNAME=v${PORTVERSION} it will be added in twice though. For
that case DISTVERSIONPREFIX=v should be set and no GH_TAGNAME should be used.
empty() is used rather than (!defined || !${}) to support fmake.
The purpose of setting DISTNAME at all in these cases is to make it more clear
that the distfile is from *GITHUB* and to avoid collisions if a project were
to be renamed or moved. Without adding in GH_PROJECT and GH_ACCOUNT then there
are real risks that collisions on filenames would happen on renamed or moved
projects, which is fairly common. A GITHUB-generated file may not match
a custom-rolled or git-archive-rolled distfile.
PR: 199069
With hat: portmgr
Testing done: All USE_GITHUB ports without GH_COMMIT were checksum/fetch/extract/WRKSRC tested.
- Add --localstatedir=/var to _LATE_CONFIGURE_ARGS (like --mandir) but not
when CONFIGURE_ARGS already sets it. (GNU configure scripts set it to
PREFIX/var when PREFIX != /usr.)
- Add --localstatedir="${PREFIX}/var" to CONFIGURE_ARGS in some ports so
they aren't affected by this change (for now at least). This commit is
meant to ensure that new ports don't make the same mistake.
- games/acm: the configure script in this port is very old; instead of
patching it more, just replace GNU_CONFIGURE with HAS_CONFIGURE.
- irc/charybdis: it already used /var but adding --localstatedir=/var
changed the behaviour of the configure script; adjust the port to this.
PR: 199506
Exp-run by: antoine
Approved by: portmgr (antoine)
- Remove const qualifier from iconv(3) to match POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
defined because the base system iconv supports these extensions too.
Add/remove patches to/from ports to call iconv with non-const arguments.
This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier. Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.
This exposed some ports that link with libiconv when it is available instead
of using libc iconv. In these cases one of the following changes has been
made:
- patch configure scripts to test for libc iconv first
- add ac_cv_lib_iconv_libiconv=no or similar to CONFIGURE_ARGS to disable
some configure tests
- converters/wkhtmltopdf: this includes Qt4 so add a patch from devel/qt4
- lang/gcc5-aux: respect CFLAGS and friends during configure such that
LIBICONV_PLUG is defined in the iconv test, also switch to external
gettext
- mail/gnarwl: replace patches with CPPFLAGS/LIBS
- multimedia/ffmpeg2theora: remove iconv test from SConstruct and use
ICONV_LIB in port Makefile instead, also fix a bug in subtitles.c
- net-im/licq: finish conversion to cmake
- net-mgmt/bandwidthd, net-mgmt/icinga, net-mgmt/nagios, net-mgmt/nagios4:
don't need iconv
- textproc/p5-XML-TinyXML: finish conversion to USES=perl5
Other changes:
- databases/qdbm and slaves: respect CFLAGS and friends, also enable bzip2
and lzo support
- games/ldmud: respect CFLAGS and friends
- graphics/inventor: replace some patches with MAKE_ARGS/MAKE_ENV to respect
CFLAGS and friends, also remove FreeBSD/alpha patch and add missing xorg
dependencies
PR: 199099
Exp-run by: antoine
Approved by: portmgr (antoine)
- Added xmlto and libxslt as dependencies, needed to build manpages
- Removed IPV6 OPTION, it doesn't exist on configure anymore
- Added NSS as a valid option to SSL
- Added a new single option EVENTS, glib or libevent2
- Removed dependency of gnutls to OTR, it builds fine with openssl and/or nss
- Disabled MSN by default, it was disabled also on configure since latest
protocol version stopped working
- As suggested by brix, takeover maintainership
PR: 199261
Approved by: brix (maintainer)
include GH_PROJECT/GH_ACCOUNT/GH_TAGNAME. This prevents the distfile
having the same name despite changing one of these values and causing
a bad checksum.
Differential Revision: https://reviews.freebsd.org/D2103
Reviewed by: mat
With hat: bdrewery
===> Building package for ircd-hybrid-8.2.5
pkg-static: Unable to access file /wrkdirs/usr/ports/irc/ircd-hybrid/work/stage/usr/local/lib/ircd-hybrid/modules/autoload/m_operwall.la: No such file or directory
pkg-static: Unable to access file /wrkdirs/usr/ports/irc/ircd-hybrid/work/stage/usr/local/lib/ircd-hybrid/modules/autoload/m_operwall.so: No such file or directory
pkg-static: Unable to access file /wrkdirs/usr/ports/irc/ircd-hybrid/work/stage/usr/local/lib/ircd-hybrid/modules/autoload/m_services.la: No such file or directory
...
Reported by: pkg-fallout
Using this new scheme allows only setting the _tag_ or _commit hash_ in
GH_TAGNAME and not having to know the hash for a tag. This scheme will
download a tarball that has a different checksum than before due to a changed
directory name for extraction.
The following MASTER_SITES are provided to retain the old checksum and
directory structure (that require GH_COMMIT):
GH -> GHL
GITHUB -> GITHUB_LEGACY
Differential Revision: https://reviews.freebsd.org/D748
Submitted by: amdmi3
Reviewed by: mat, swills, antoine, bdrewery
With hat: portmgr
Feedback from upstream:
Hello,
EGD support has been dropped in ircd-hybrid 8.1.20 which was released
on July 20, 2014.
Also the compression issue has been fixed as well sometime last year.
Greets,
Michael
Bernard Spil schrieb:
Hi,
ircd-hybrid unconditionally uses RAND_egd which has been removed from
LibreSSL. Additionally it uses compression which is moved to a separate
header.
Attached patches
1. Use autoconf to detect availability of RAND_egd in libcrypto
2. Disable EGD if RAND_egd is not available
3. Add the openssl/comp.h header to src/rsa.c to fix build
I've been working through over 60 build failures with LibreSSL and
supplying FreeBSD ports and upstream projects with patches, check
https://wiki.freebsd.org/LibreSSL and
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=198505 for this bugs
status in ports.
Please include this patch into your product. Additionally please review
completely removing EGD as no platform requires it or has required perl
EGD as a random source fer many years.
Kind regards,
Bernard Spil.
PR: ports/198505
Submitted by: spil.oss@gmail.com
- Remove dependencies on modules distributed as part of perl core
- Remove references to FreeBSD < 8 and perl < 5.16
- Ensure that DOCS and EXAMPLES options exist for ports installing
PORTDOCS or PORTEXAMPLES
- Reduce unnecessary inclusions of bsd.port.options.mk by using
OPTIONS helpers and the like
- Fix some cases where dependencies were only assigned to BUILD_DEPENDS
- Fix a few of the cases where dependencies were only assigned to RUN_DEPENDS.
This one happens in many, many ports. I only applied it in cases where
it interfered with 'make test' but it should maybe be done more generally.
- Mute ${MKDIR} in installation
- Parethesize compound commands
- In www/p5-URI-Fetch, remove the ZLIB option that wasn't used
Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code. Take
care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in
- Fix building for the x32 target without asm modules in
mpi/generic/mpi-asm-defs.h: Use a fixed value for the x32 ABI.
- Fix ARM assembly when building __PIC__
- mpi: Fix a subtle bug setting spurious bits with in mpi_set_bit.
* mpi/mpi-bit.c (_gcry_mpi_set_bit, _gcry_mpi_set_highbit): Clear
allocated but not used bits before resizing.
* tests/t-mpi-bits.c (set_bit_with_resize): New.
- Use internal malloc function in fips.c.
* src/fips.c (check_binary_integrity): s/gcry_malloc/xtrymalloc/.
- pubkey: Re-map all deprecated RSA algo numbers.
- cipher: Fix possible NULL dereference in cipher/md.c for being NULL.
- Fix ARMv6 detection when CFLAGS modify target CPU architecture.
PR: 193264
Approved by: cpm@fbsd.es (maintainer)
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
which depends on imlib2
PR: 196062
Approved by: portmgr
