- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
LICENSE= PD
Note that although Public Domain is not technically a license, it's
handled in the same way as licenses here, which is a common practice
(Arch, Gentoo, Fedora, Debian, even FOSSology do the same).
Convert all ports which redefine Public Domain LICENSE to LICENSE=PD.
Approved by: portmgr (bapt)
Differential Revision: D4149
${PERL5} points to a specific version of perl, say, perl5.22.1, it is
fine to use it in a ports Makefile to do Perly things, but ports using
it must use ${PERL}, that points to /usr/local/bin/perl so that if the
minor version is updated, the shebang keep working.
While there, make some ports use shebangfix, regen a few patches, and
bump PORTREVISION where a shebang went from PERL5 to PERL.
PR: 205367
With hat: portmgr
Sponsored by: Absolight
According to portsmon, benchmarks/fio's build is currently broken on 9 after
the update to 2.2.11:
lex: can't open lex.yy.c
with a verbose build it's possible to see that this is because base's flex
on 9 is too old and does not support "-o foo", it requires "-ofoo".
Depending on flex from ports to fix the build is not enough, as then the
yacc call fails:
/usr/bin/yacc -o y.tab.c -l -d -b y exp/expression-parser.y
yacc: e - line 68 of "exp/expression-parser.y", syntax error
%parse-param { long long *result }
^
Makefile:312: recipe for target 'y.tab.c' failed
Fix it by depending on both textproc/flex and devel/bison when the versions
in base are too old.
PR: 205022
Approved by: bapt (maintainer)
2015-11-26 audio/pecl-id3: Broken for more than 6 months
2015-11-26 dns/geta: Broken for more than 6 months
2015-11-26 finance/openerp-web: Broken for more than 6 months
2015-11-26 devel/py-async: Further using of this module is not encouraged by upstream
2015-11-26 chinese/kon2: Depends on expiring chinese/cce
2015-11-26 games/linux-skulltag: Depends on expiring audio/linux-fmodapi
2015-11-26 archivers/wzip: Broken for more than 6 months
2015-11-26 databases/sybtcl: Broken for more than 6 months
2015-11-26 biology/povchem: Broken for more than 6 months
2015-11-26 audio/btc: Broken for more than 6 months
2015-11-26 astro/wmglobe: Broken for more than 6 months
2015-11-26 graphics/pyro: Broken for more than 6 months
2015-11-26 graphics/jpeg2ps: Broken for more than 6 months
2015-11-26 chinese/gugod-clean: Broken for more than 6 months
2015-11-26 comms/bforce: Broken for more than 6 months
2015-11-26 cad/geda-docs: Broken for more than 6 months
2015-11-26 chinese/cwtexttf: Broken for more than 6 months
2015-11-26 comms/zmtx-zmrx: Broken for more than 6 months
2015-11-26 astro/sky2000: Broken for more than 6 months
2015-11-26 deskutils/libopensync-plugin-file: Broken for more than 6 months
2015-11-26 databases/sqlite-ext-mobigroup: Broken for more than 6 months
2015-11-26 chinese/bg5ps: Broken for more than 6 months
2015-11-26 deskutils/x-tile: Broken for more than 6 months
2015-11-26 graphics/pure-gl: Broken for more than 6 months
2015-11-26 audio/dvda-author: Broken for more than 6 months
2015-11-26 chinese/oxim: Broken for more than 6 months
2015-11-26 editors/spe: Broken for more than 6 months
2015-11-26 audio/mpdscribble: Broken for more than 6 months
2015-11-26 cad/geda-symcheck: Broken for more than 6 months
2015-11-26 audio/linux-fmodapi: Broken for more than 6 months
2015-11-26 audio/pure-audio: Broken for more than 6 months
2015-11-26 editors/bpatch: Broken for more than 6 months
2015-11-26 benchmarks/geekbench: Broken for more than 6 months
2015-11-26 graphics/icoconvert: Broken for more than 6 months
2015-11-26 cad/geda-utils: Broken for more than 6 months
2015-11-26 deskutils/tomboy-plugin-wordcount: Broken for more than 6 months
2015-11-26 graphics/sketch: Broken for more than 6 months
2015-11-26 ftp/spegla: Broken for more than 6 months
2015-11-26 graphics/clutter-box2d: Broken for more than 6 months
2015-11-26 audio/scmpc: Broken for more than 6 months
2015-11-26 ftp/gnusget: Broken for more than 6 months
2015-11-26 comms/gpsk31: Broken for more than 6 months
2015-11-26 cad/geda-gschem: Broken for more than 6 months
2015-11-26 audio/ampache: Broken for more than 6 months
2015-11-26 cad/slffea: Broken for more than 6 months
2015-11-26 audio/cripple: Broken for more than 6 months
2015-11-26 cad/geda-gattrib: Broken for more than 6 months
2015-11-26 cad/findhier: Broken for more than 6 months
2015-11-26 biology/njplot: Broken for more than 6 months
2015-11-26 audio/wmmp: Broken for more than 6 months
2015-11-26 x11/avant-window-navigator: Broken for more than 6 months
2015-11-26 cad/geda-netlist: Broken for more than 6 months
2015-11-26 deskutils/libopensync-plugin-sunbird: Broken for more than 6 months
2015-11-26 biology/ortep3: Broken for more than 6 months
2015-11-26 astro/aa: Broken for more than 6 months
2015-11-26 french/belote: Broken for more than 6 months
2015-11-26 converters/p5-String-SetUTF8: Broken for more than 6 months
2015-11-26 cad/geda-examples: Broken for more than 6 months
2015-11-26 editors/yasnippet: Broken for more than 6 months
2015-11-26 audio/musica: Broken for more than 6 months
2015-11-26 graphics/rubyphoto: Broken for more than 6 months
2015-11-26 german/bsdpaste: Broken for more than 6 months
2015-11-26 audio/amrcoder: Broken for more than 6 months
2015-11-26 sysutils/bashburn: Broken for more than 6 months
2015-11-26 editors/e93: Broken for more than 6 months
2015-11-26 audio/tepsonic: Broken for more than 6 months
2015-11-26 astro/ephem: Broken for more than 6 months
2015-11-26 chinese/cce: Broken for more than 6 months
2015-11-26 graphics/qcread: Broken for more than 6 months
2015-11-26 databases/py-sqlkit: Broken for more than 6 months
2015-11-26 databases/usogres: Broken for more than 6 months
2015-11-26 cad/libgeda: Broken for more than 6 months
2015-11-26 chinese/p5-Lingua-ZH-BPMFConvert: Broken for more than 6 months
2015-11-26 french/alphabet_sounds_fr: Broken for more than 6 months
2015-11-26 deskutils/mrundlg: Broken for more than 6 months
2015-11-26 databases/erlang-mysql: Broken for more than 6 months
2015-11-26 graphics/linux-XnViewMP: Broken for more than 6 months
2015-11-26 deskutils/akamaru: Broken for more than 6 months
2015-11-26 dns/p5-Net-DNS-ZoneCheck: Broken for more than 6 months
2015-11-26 astro/dgpsip: Broken for more than 6 months
2015-11-26 databases/pecl-handlersocket: Broken for more than 6 months
2015-11-26 audio/cymbaline: Broken for more than 6 months
2015-11-26 french/dico: Broken for more than 6 months
2015-11-26 comms/qpage: Broken for more than 6 months
2015-11-26 audio/sonice: Broken for more than 6 months
2015-11-26 cad/geda-symbols: Broken for more than 6 months
2015-11-26 databases/java-mybatis: Broken for more than 6 months
2015-11-26 databases/openbase-jdbc: Broken for more than 6 months
2015-11-27 www/mediawiki119: Please upgrade to mediawiki-1.25
2015-11-28 www/R-cran-Rpad: Unmaintained upstream
- Escape literal dot properly in sed(1) code (for REINPLACE_CMD)
- Spell "C-string" correctly in COMMENT and add a missing newline
- Use NULL for pointer in C code (original snippet was for C++ and Bjarne
prefers to avoid macros, per his C++ Style and Technique FAQ)
- Drop ONLY_FOR_ARCHS as the Linux-specific code is gone
- Chase new home on SourceForge
- LICENSE_FILE is now shipped within distfile
Changes: http://www.fsl.cs.sunysb.edu/~vass/filebench/ChangeLog (before 1.4.9)
Changes: http://sourceforge.net/p/filebench/code/ci/1.4.9.1/log/
PR: 202989
Tested by: danfe (powerpc locally, ia64 on eris, sparc64 on flame)
Tested by: myself (armv6 via qemu-user-static)
Approved by: maintainer timeout (18 days)
- Expand Linux ppc into FreeBSD powerpc and powerpc64
- Reword COMMENT based on summary in ${WRKSRC}/README
- Rename files/patch-* according to |make makepatch|
- Pet |portlint -C|
PR: 202989
Approved by: portmgr blanket
While here, set the license (GPLv2). The other changes to the Makefile
and the non-WWW part of pkg-descr are technically unnecessary, but in
my opinion they are in improvement so I keep them. I did remove some
of the suggested changes in the patch though.
PR: 200294
Submitted by: Ports Fury
While here, set the license (GPLv2). The other changes to the Makefile
and the non-WWW part of pkg-descr are technically unnecessary, but in
my opinion they are in improvement so I keep them. I did remove some
of the suggested changes in the patch though.
PR: 200295
Submitted by: Ports Fury
This port was broken due to being unfetchable. While finding a new
source location, switch the executable from lib/fhourstones to
libexec/fhourstones. Also, use "sed" and "echo" to eliminate the
need for patches.
Some changes were made to the submitted patch by me, but they were minor.
PR: 200293
Submitted by: Ports Fury
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
When using GH_TAGNAME the DISTNAME would have GH_PROJECT and GH_ACCOUNT in
it. When not using GH_TAGNAME it would not have this. Now both cases
will add in the GH_PROJECT and GH_ACCOUNT.
Add special care to ensure that the DISTVERSION is not added in twice. If
a port does GH_TAGNAME=v${PORTVERSION} it will be added in twice though. For
that case DISTVERSIONPREFIX=v should be set and no GH_TAGNAME should be used.
empty() is used rather than (!defined || !${}) to support fmake.
The purpose of setting DISTNAME at all in these cases is to make it more clear
that the distfile is from *GITHUB* and to avoid collisions if a project were
to be renamed or moved. Without adding in GH_PROJECT and GH_ACCOUNT then there
are real risks that collisions on filenames would happen on renamed or moved
projects, which is fairly common. A GITHUB-generated file may not match
a custom-rolled or git-archive-rolled distfile.
PR: 199069
With hat: portmgr
Testing done: All USE_GITHUB ports without GH_COMMIT were checksum/fetch/extract/WRKSRC tested.
relinquish at some point to allow contributions coming more easily (not to
impose hard lock). These days, there is no reason to yield maintainership
with the more lax rules and general consensus that casual changes do not
necessarily require explicit approval from maintainer prior to commit.
On the other hand, unmaintained ports can give (arguably false) impression
of being unwanted and one step above deprecation, yet these ports are not.
Inspired by: marino
SMHasher is a test suite designed to test the distribution, collision,
and performance properties of non-cryptographic hash functions -
it aims to be the "DieHarder" of hash testing, and does a pretty
good job of finding flaws with a number of popular hashes.
The SMHasher suite also includes MurmurHash3, which is the latest
version in the series of MurmurHash functions - the new version is
faster, more robust, and its variants can produce 32- and 128-bit
hash values efficiently on both x86 and x64 platforms.
https://code.google.com/p/smhasher/
Xorg is now looking in ${LOCALBASE}/share/fonts by default
Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1))
Large cleanup on lots of font ports
All fonts are now properly dynamically generating fonts.dir and fonts.scale
instead of sometime overwriting existing ones)
All fonts are generating fontconfig's cache
Improve consistency in fonts ports
- Remove dependencies in core
- Put testing depends in TEST_DEPENDS
- Remove unnecessary bsd.port.options.mk inclusions
- Remove checks for Perl versions that no longer exist in the ports tree
- Sort plists, some of which were so jumbled that I have to assume
the plist was randomized before committing
A lot of the plist changes in this commit are moving PERL5_MAN3 after
SITE_PERL. It's repo churn now, but it makes updating the ports later
far easier.
- take maintainer
- new distsite
- changes since 2008
o Allow longer server info timeout for third party via --idle-data-timeout
o Added feature to specify source port with "-p#:#" and "-P#:#"
o Add "-g" option to specify multicast IP address to use
o Clean up really confused transmit code for IPv4/IPv6 SSM multicast
o Bug fix from Aristeu Rozanski:
Crash caused by closing TCP_ADV_WIN_SCALE file even if open failed
o Fix bug with server CPU affinity being parsed as %X instead of %d
For non-sinkmode insure complete network block is written to stdout
Above fixes nuttscp bug seen with --copy-dir getting premature EOF
o Not every system has ERESTART added in 7.1.4, wrapped in ifdef
o Fix non-Linux systems to properly count TCP retrans for multiple streams
o Detect EOD for non-sinkmode UDP transfers
o Suppress bogus warning when using maximum size UDP packet
o Terminate non-sinkmode after specified file size with "-n" option
o Allow multilink aggregation with "-N##m" option to work for receive
o Add "-sz" zero copy option for non-sinkmode when input is a regular file
o Remove "-Sf" forced server mode from Usage: statement
o Fix zeroing of clientaddr6 during server cleanup
o Fix freeaddrinfo() processing during cleanup
o Change manually started oneshot server to have parent process just exit
o Provide summary TCP retrans info for multi-stream TCP
o Fix bug with retrans interval info when -fparse
o Add "+stride" or "+n.n.n.n" syntax for multi-stream TCP (IPv4)
o Fix third party bug with "-xc" option adding extraneous 't' character
o Add optional client-side name resolution for third party host
o Add "-N##m" option for multilink aggregation for multiple streams
o Add "-xc#/#" and "-P#/#" options to Usage: statement
o Enable jitter measurements with "-j" option
o Enable one-way delay measurements with "-o" option
o Fix bug with RTT and -fparse
o Change ctl/data port checks to < 1024 instead of < 5000
o Fix "--idle-data-timeout" Usage: statement for new default minimum
o Improve transmit performance with "-i" by setting poll() timeout to 0
o Don't output interval retrans info if non-sinkmode (for nuttscp)
o Skip check for unACKed data at end of transfer if -DBROKEN_UNACKED
o Play nice with iperf (change default data port to 5101)
o Delay sending of server "OK" until after successful server bind()
o Client check for server errors before starting data transfer
o Continue checking for server output while draining client transmission
o Correct "server not ACKing data" error message (server -> receiver)
o Add "--packet-burst" option for Rob
o Fix "--idle-data-timeout" Usage: statement for client
o Improve accuracy of retrans info timing synchronization (client xmitter)
o Allow rate limit to be exceeded temporarily by n packets ("-Rixxx/n")
o Allow setting server CPU affinity from client via "-xcs" option
o Allow setting client & server CPU affinity via third party
o Allow passing of third party control port via "-Pctlport/ctlport3"
o Up default idle data minimum to 15 sec to better handle net transients
o Don't reset nstream until after last use (fix getaddrinfo() memory leak)
o Fix bug with simultaneous server connections to manually started server
o Fix Usage: statement: "--idle-data-timeout" both server & client option
o Don't reset priority on server cleanup
o Fix priority output for "-fparse"
o Fix bad third party bug causing >= 1 minute transfers to silently fail
o Fix Usage: statement: "--idle-data-timeout" not just a server option
o Added IPv6 and SSM MC support
Ported from Rob's 5.5.5 based code by Bill Fink
o Fix client lockup with third party when network problem (for scripts)
o Bugfix: set chk_idle_data on client (now also checks no data received)
o Use argv[0] instead of "nuttcp" for third party
o Bugfix: give error message again on error starting server
o Timeout client accept() too and give nice error message (for scripts)
PR: 197475
Submitted by: pi
Approved by: Andrew Clark <andrewclarkii@gmail.com> (old maintainer)
- Delete makefil as a patch
- Add new makefile for the project without BSD dependencies
- Fix out of order declarations in makefile
- Install doc by default
- bump port revision
Submitted by: rodrigo
Reviewed by: bapt, danfe
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.
As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.
The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.
The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.
PR: 194969
Differential Revision: https://reviews.freebsd.org/D1019
Exp-run by: antoine
Reviewed by: perl@
Approved by: portmgr
- Update x11-toolkits/elementary to 1.12.0
- Update x11-wm/enlightenment to 0.19.1
- Update graphics/evas_generic_loaders-* to 1.12.0
- Update devel/e_dbus to 1.7.10
- Update benchmarks/expedite to 1.7.10
- Move some of x11-wm/e17-module-* to x11-wm/e-module-*
and update to recent snapshots
- Add multimedia/emotion_generic_players-vlc
- Add multimedia/rage
Reviewed by: crees, antoine
It's possible that the previous fix won't work when host version
doesn't match jail version, so recreate the "os" script to ensure
that the PLIST_SUB variable and build directory always match.
The PLIST_SUB hack that worked for years stopped working with recent
changes to PLIST_SUB handling. We don't need to run a script to
figure out where the files are getting installed. We can recreate it
from ARCH, OPSYS, and OSREL variables.
Remove patches and hacks that were used to work around the previous
situation
This allows to stage more ports as a regular user
Differential Revision: https://reviews.freebsd.org/D703
Reviewed by and discussed with: bapt
With hat: portmgr
rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:
- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
(which are still fetchable from rubygems.org)
The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.
Phabric: D591
With hat: ruby
Approved by: portmgr (because of committing to unstaged graphics/mingplot port)
- Move from launchpad to github
- Add LICENSE
- Updat pkg-descr with new description and URL
PR: 190554
Submitted by: Lars Eggert <lars@eggert.org> (maintainer)
Approved by: mentors (implicit)
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
Where possible, correct a few instances where PORTDOCS was being used
to flag stuff in EXAMPLESDIR. For some ports, mostly those owned by
ruby@, PORTDOCS is applied to pretty much everything whether it's
documentation or example.
By request of Gea-Suan Lin <gslin@gslin.org> - reset ports to ports@FreeBSD.
Gea-Suan Lin's work is much appreciated.
Approved by: portmgr (implicit) (not really, skipping NO_STAGE check)
Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy. Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.
Approved by: portmgr (implicit)
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream. Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.
Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix. Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS. This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.
PR: 190592
Exp-run by: antoine
Approved by: portmgr (antoine)
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
2014-04-30 x11-toolkits/gigi: Does not compile on 10 or higher
2014-04-30 net/asterisk-oh323: Depends on broken and unsupported asterisk14
2014-04-30 net/asterisk14: Broken and unsupported
2014-04-30 net/asterisk14-addons: Depends on broken and unsupported asterisk14
2014-04-30 ports-mgmt/pkg_install: Replaced by ports-mgmt/pkg
2014-05-01 x11-drivers/xf86-input-magictouch: Does not compile
2014-05-01 x11-drivers/xf86-video-cyrix: requires pciVideoPtr typedef
2014-05-01 x11-drivers/xf86-video-sis-intel: requires pciVideoPtr typedef
2014-05-01 net/py-spreadmodule: Depends on expired net/spread
2014-05-01 net/p5-Spread-Message: Depends on expired net/spread
2014-05-01 net/p5-POE-Component-Spread: Depends on expired net/spread
2014-05-01 net/p5-Spread-Session: Depends on expired net/spread
2014-05-01 sysutils/wmmemload: Broken
2014-05-01 lang/ml-pnet: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 lang/treecc: PNET dependency decommissioned Dec 2012
2014-05-01 lang/pnetlib: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 lang/pnet-base: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 benchmarks/pnetmark: PNET dependency decommissioned Dec 2012
2014-05-01 lang/pnet: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 x11-wm/stumpwm: Broken for more than 4 months
2014-05-01 sysutils/cpupowerd: Not maintained from upstream anymore and only supports ancient AMD K8.
2014-05-01 net/pchar: Obsolete, abandoned
2014-05-03 x11-fonts/texcm-ttf: Should be replaced by x11-fonts/stix-fonts
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
2014-03-07 emulators/gxmame: Depends on deprecated emulators/xmame
2014-03-07 emulators/pyxmame: Depends on deprecated emulators/xmame
2014-03-07 emulators/xmess: No more public distfiles
2014-03-07 benchmarks/xdd: No more public distfiles
2014-03-07 chinese/srecite: No more public distfiles
2014-03-07 games/hlstats: No more public distfiles
2014-03-07 audio/teamspeak_server: No more public distfiles
2014-03-07 games/utserver: No more public distfiles
2014-03-07 databases/p5-hp200lx-db: No more public distfiles
2014-03-07 audio/teamspeak_client: No more public distfiles
2014-03-10 german/vtiger: Depends on expiring www/vtiger
2014-03-10 www/gallery: No more public distfiles
2014-03-10 www/vtiger: No more public distfiles
2014-03-10 net/linux-nx-client: No more public distfiles
2014-03-10 emulators/extract-xiso: No more public distfiles
2014-03-10 www/trac-wantedpages: No more public distfiles
2014-03-10 www/trac-ldap: No more public distfiles
2014-03-10 www/trac-codetags: No more public distfiles
2014-03-10 www/trac-addcomment: No more public distfiles
2014-03-10 www/trac-nav: No more public distfiles
2014-03-10 www/baikal: No more public distfiles
2014-03-10 www/trac-pagetopdf: No more public distfiles
2014-03-10 sysutils/logmon: No more public distfiles
2014-03-10 www/trac-simpleticket: No more public distfiles
2014-03-10 www/trac-wikinegotiator: No more public distfiles
2014-03-10 www/trac-pagelist: No more public distfiles
2014-03-10 www/trac-remind: No more public distfiles
2014-03-10 www/trac-macropost: No more public distfiles
2014-03-10 mail/vexim: No more public distfiles
2014-03-10 lang/rscheme: No more public distfiles
9.x in order to prevent run-time breakage after the recent changes in
libiconv
- Bump port revision for lang/ghc and all dependents, as a consequence
Obtained from: FreeBSD Haskell
PNET was never more than alpha quality software and IMO never deserved
a place in ports. It has been abandoned for years and no releases since
March 2007. To celebrate this dubious anniversary, I'm setting a
countdown on these ports. As illustration, even pkgsrc, which doesn't
throw anything way, eliminated their PNET ports over a year ago.
I brought up the subject to Sylvio, the maintainer, well over a year ago
but he's been MIA the entire time, so I am also resetting maintainership
now as well.
Checking on http://www.gnu.org/software/dotgnu/, it informs that the
DotGNU project has been decommissioned since December 2012.
Execution on May Day.
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
