Version 4.5.5
* rig_get_conf deprecated and replaced by rig_get_conf2
* 2023-04-05
* rot_get_conf deprecated and replaced by rot_get_conf2
* Add park to rotorez.c
* Change FT1000MP Mark V model names to align with FT1000MP
* Fix rig power on/off from rigctl cmd line and rigctld
* Enable async mode by default to prevent WSJT-X crash on IC9700 with
PR: ports/267682
Reported by: takefu@airport.fm
- Remove USE_PHP=hash which is available in default php installation of
all versions of php
* security/pear-Horde_Crypt_Blowfish: Remove OPTION MHASH
- Remove USE_PHP=json which is available in default php installation of
all versions of php
* devel/pear-PHPTAL: Remove OPTION JSON
* www/ilias: Remove OPTION SCORM2004
- Remove USE_PHP=mssql which is no longer available in php from php80
and later and has been replaced with sqlsrv module which is Windows
only
* www/codeigniter: Remove OPTION MSSQL
* www/moodle311: Remove OPTION MSSQL
* www/moodle39: Remove OPTION MSSQL
* www/moodle40: Remove OPTION MSSQL
* www/moodle41: Remove OPTION MSSQL
- Remove USE_PHP=openssl which is available in default php installation
of all versions of php
* databases/phpmyadmin: Remove OPTION OPENSSL
* databases/phpmyadmin5: Remove OPTION OPENSSL
* security/pear-Horde_Crypt_Blowfish: Remove OPTION OPENSSL
* www/nextcloud: Remove OPTION SSL
* www/owncloud: Remove OPTION SSL
- Remove USE_PHP=pcre which is available in default php installation of
all versions of php
* sysutils/racktables: Remove OPTION PCRE
- Remove USE_PHP=postgresql which should be USE_PHP=pgsql and update
following ports
* www/typo3-11
* www/typo3-12
- Remove USE_PHP=pdf which is no longer available as php module
* databases/phpmyadmin: Remove OPTION PDF
- Remove USE_PHP=spl which is available in default php installation of
all versions of php
- Remove USE_PHP=sqlsrv which was never imported into FreeBSD as that is
Windows only php module
* www/typo3-11: Remove OPTION SQLSRV
* www/typo3-12: Remove OPTION SQLSRV
- Bump where DEFAULT OPTIONS are affected
Sponsored by: Bounce Experts
Approved by: portmgr(blanket)
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
* xml: Add some missing DeviceEventController methods.
* Bind the AT-SPI bus to the graphical session.
* Mark bus service as belonging to the session slice.
* Add ATSPI_ROLE_PUSH_BUTTON_MENU.
* Add an "announcement" event/signal to allow objects to send
notifications (!63).
* Various code clean-ups and test improvements.
What's new in at-spi2-core 2.45.1:
* Atk and at-spi2-atk are now merged into this project.
* Now requires meson 0.56.2 and glib 2.67.4.
* at-spi2-atk: Expose the accessible hierarchy via dbus introspection.
* Properly escape the AT-SPI bus address; fixes warnings about the address
not containing a colon (!55).
* Add a text value to AtspiValue, so that a value can expose a textual
description, as in the new Atk value API.
* Add atspi_event_listener_register_with_app, to allow an event listener
to be registered only for a given application (!52).
- accessibility/atk and accessibility/at-spi2-atk have been merged into
accessibility/at-spi2-core
- accessibility/at-spi2-core: bump consumers of removed ports atk and at-spi2-atk
PR: 269704
Exp-run by: antoine
---
Since this port works with Python 3.6 and later, the value of
PY_PILLOW doesn't change. So replace reference to it with its value.
PR: 269398
Approved by: maintainer timeout
- Moved distribution site to documented dedicated server
- added LICENSE_FILE
- Petted portlint
Change log is very extensive since this is a major update.
Check xnec2c.html for more ..
on 4.4.12: This release has been pending for a while, there are
quite a few changes. I thought about making this 4.5 but not yet since
these are mostly maintenance items, with a few new features as well:
* UI Features:
+ Added "File->Save-as CSV" in the Frequency Plots window
+ Added optimizer output config checkboxes for csv, s1p, and/or
s2p. Now you can auto-generate .csv, .s1p, or .s2p files when
the input .NEC file is modified by an external program.
+ Pre-processed CSV data for each example .NEC file and placed
them in examples/data/. You can view these with any
spreadsheet program and graph columns as you like; the data is
useful for regression testing, too.
+ Updated optimization documentation.
* Console Features:
+ Refactored console output based on output priority levels.
Console output is now color coded and output level can be
controlled with -v and -d options. See --help for details.
+ Add batch mode (-b) commandline flag.
+ Added commandline options --write-csv, --write-s1p,
--write-s2p-max-gain, and --write-s2p-viewer-gain for use with
--batch and the optimizer.
...
See xnec2c.html
s Please enter the commit message for your changes. Lines starting
Fairly lengthy changes we were quite out of date...
I did do a quick API check.
Version 4.5.3
* 2022-12-31
* Fix serial.c for hardware flow control on Linux and MacOSy
* Add QRPLabs QCX/QDX rig -- not quite a TS480
* Fix QRP QRDX firmware bugs in IF message so PTT works now
* FTDX5000 will now remember startup front/read settings and restore it
* Fix FTDX5000 write_delay with microham
* Fix grep error on MingW build
Version 4.5.2
* 2022-12-23
* Fix PowerSDR ability to do commands while powered off
* Fix TX-500 operations
* Fix FTDX5000 to return to MIC input on closing
* Fix rig.c calling rig_get_mode when backend does not have get_mode
* Fix kenwood_ts890_get_level
* Add Prosistel D elevation CBOX az to fix problem with azimuth control
* Fix FT736R gpredict usage by adding cached get_freq
* Fix get_powerstat problem with Log4OM/Flex and others
* Fix -R option to not need argument
* Fix -R option to close rig on last rigctld client disconnect
* Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency
* Add --disable-parallel configure option for mingw builds on Linux
Version 4.5.1
* 2022-12-08
* FT2000, FTDX3000/D, FT891, FT991, FT950, FTDX5000 now set CAT TOT to 100ms
* Add missing NB2 setting to FT-950, FTDX-1200, FT-2000, FTDX-3000, FTDX-5000, FTDX-9000
* Add missing meter reading to TS-890S -- thanks to Geore Baltz N3GB
* Fix FT736 VFOB freq and mode set
* Added send_raw to rigctl -- see rigctl man page
* Fix AGC Level dumpcaps on most rigs
* Fix rig_send_raw to return bytes read, fill buffer, and also work with fixed length response/null terminator
* Change all Kenwood rigs to 500ms serial timeout
* Fix dumpcaps filter printout to only show declared filters
* Fix triggering PTT on XGComms device on Linux
* Fix level_gran in all rigs
* Add RIG_FUNC_TUNER to flrig.c
* Fix FT-991 level_gran (needs to be done for lots of rigs)
* Fix man page rigctl to show units for LEVEL items
* Fix Flex6xxx if_len
* Fix FLRig set_ptt
* Fix missing KEYSPD to TS890
* rigctl 'W' command can now use a singled char terminator like ; that allows for variable length responses with no timeout -- e.g. W FA; ;
* New RIG_LEVEL_USB_AF to control audio gain from rig to computer -- to allow AGC function in software using RF and USB_AF
* Add RIG_LEVEL_AGC_TIME to allow AGC/OFF to be set for IC-7300, IC-9700, IC-705
* Add RIG_FUNC_OVF_STATUS to get overflow status for IC-7300, IC-9700, IC-705, and IC-R8600
Version 4.5
* 2022-10-30
* New rotator utility https://www.pianetaradio.it/blog/catrotator/
* Add FT-710
* Add Rohde&Schwartz EK89X receiver
* Add Xeigu X5105
* Add Gemini DX-1200 HF-1K Amplifiers
* Kenwood rigs should now support AI command packets
* Add FT-990UNI for older 990 ROMs 1.2 and earlier
* Add FT-650
* Add get_separator and set_separator and -S option for rigctld -- node-red applicability
* Add GRBLTRK rotor project -- two axis rotor
* Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
* Add ability to use cat_string to FLRig via the "w" and "W" commands
* Add -B/--mapa2b to rigctlcom
Allows rigctlcom to map set_freq on VFOA to VFOB instead
This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
Clicking on CW Skimmer will change VFOB instead of VFOA to allow working
dxpeditions where the fox is staying on frequency
* Add password capability to rigctld via -A switch.
rigctld -A will produce a consistent shared key for any specific password that can used in \password and rig_set_password
TBD The shared key can also be placed in .hamlib_settings
* Asynchronous rig data output handling to support transceive and spectrum data. Mikael, OH3BHX
Example for the IC-7300 to multicast on port 20001 and provide async rig information
rigctld --port=20001 --model=3073 --serial-speed=115200 --rig-file=/dev/serial/... --set-conf=rts_state=OFF --set-conf=dtr_state=OFF --multicast-addr=224.0.0.1 --multicast-port=20001 --set-conf=async=1
Also, spectrum data output needs to be enabled with: \set_func SPECTRUM 1
* See new set_conf option async for some Icom rigs
* Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
* Rig state poll routine to serve commonly used data like frequency and mode from cache. Mikael, OH3BHX
* deprecated hamlib_port_t at front of rig_state structure -- new one at end of structure
* New rig_send_raw to send/read raw command to rig
* New RIG_LEVEL_BAND_SELECT for Yaesu rigs
* New rig_get_conf2 to replace rig_get_conf buffer overflow potential
* New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
* Added Barrett 4050 -- not functional yet
* Added TCI 1.X -- not functional yet
* Added TM-V71(A)
* Added IC-F8101
* Added JRC JST-145 and JST-245
* Added Xiegu X108G, G90, and X6100
* Added CODAN Envoy and NGS
* Added Lab599 TX-500
* Added GOMSPACE GS100
* Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as they never worked as intended
* Deprecated: field rig_caps.transceive and RIG_TRN_* macros
PR: ports/267682
Reported by: takefu@airport.fm
Tested by: db
Pymodbus is a full Modbus protocol implementation offering
asynchronous communications. It can also be used without any
third party dependencies (aside from pyserial) if a more
lightweight project is needed.
PR: 251614
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925
