If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
Split off gnome-pty-helper from vte to allow both versions of vte to be
installed at the same time.
Update comment to make it clearer which gtk+ version it is for.
Enable introspection bindings in vte.
Obtained from: GNOME dev repo.
- Revert options helpers to if statements since the OFF condition is not
applied when OPTIONS_EXCLUDE is used
- Move most of the OpenCV modules from the graphics/opencv-core port to
graphics/opencv, leaving opencv-core as just the bare minimum required
for building ffmpeg with OpenCV support
- Install examples for python and java bindings
- Add new slave port graphics/opencv-java: Java bindings for OpenCV
- Bump PORTREVISION and make dependency adjustments and fixes for
dependent ports
- Add UPDATING entry
For all new features, see
http://www.nlnetlabs.nl/svn/nsd/tags/NSD_4_0_0_REL/doc/NSD-4-features
This version replaces the nsdc control program with nsd-control.
This requires some manual setup with nsd-control-setup and editing
of the config files. nsd-control is incompatible with nsdc so when
that is used in scripts, these should be adapted.
NSD 3 is still supported as dns/nsd3.
PR: 183888
Submitted by: Jaap Akkerhuis <jaap@NLnetLabs.nl>
20131020:
AFFECTS: users of mail/squirrelmail
AUTHOR: adamw@adamw.org
The default location for user data files and attachments has changed.
This will only affect new installations, and upgrading SquirrelMail
WILL NOT break your current installation.
To make use of the new locations, do the following:
# cp -rp /var/spool/squirrelmail/pref/* /usr/local/www/squirrelmail/data
# cp -rp /var/spool/squirrelmail/attach/* /usr/local/www/squirrelmail/attach
and then run /usr/local/www/squirrelmail/configure and tell SM about
it ("Data Directory" and "Attachment Directory" under "General Options").
This version of SquirrelMail is a SNAPSHOT that brings in PHP 5.4 and 5.5
compatibility.
- Use USE_GNOME= ltverhack to correct the library version number
to what the author intended. This effectively rolls the version
number backwards, but should prevent future unneccesary version
bumps.
- Support staging
- Use options helpers
- Use new LIB_DEPENDS syntax
- Bump PORTREVISION on dependent ports
Supported arguments are:
- c++11-lang: the port needs a c++11 aware compiler what ever standard
library it uses, implies features
- c++11-lib: the port needs a c++11 standard library, implies features
- c11: the ports needs a c11 aware compiler implies features
- features: this will create a COMPILER_FEATURES variable which contains
the list of features ${CC} do support, implies env.
- env: the COMPILER_TYPE will be set to either gcc or clang.
By default the uses will try to use clang33 from ports when nothing in
base is relevant except if the user explicitly defines
FAVORITE_COMPILER=gcc in his make.conf
Please note that testing tinderbox prior to version: 4.0.1_1 is not able to
properly figure out the dependencies implied by this USES.
- add stage support
- move from net-mgmt/nrpe2 -> net-mgmt/nrpe
to reflect the port and package name
Changes:
2.15 - 09/06/2013
-----------------
- Now compiles on HP-UX (Grant Byers)
- Added support for IPv6 (Leo Baltus, Eric Stanley)
new DEFAULT_VERSIONS variable.
PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
make.conf, you should change them something like
DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3
a kwm, zeising production:
MESA 9.1.6
Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first. See UPDATING for details.
PR: ports/181962 [2]
Submitted by: marius [1]
zeising [2]
Exp-run by: bdrewery
Approved by: portmgr (bdrewery)
Thanks to all who helped testing!
has issues with 'installworld' when WITH_SSP is defined. [1]
Keep WITH_SSP support for now since it has been announced as that
already.
- Remove redundant wording in UPDATING [2]
Suggested by: bapt [1]
Reported by: blakkheim on EFNet
With hat: portmgr
break with /usr/src 'make installworld' due to some of those
Makefiles having WITHOUT_SSP hardcoded in them, causing an error
that both can't be defined.
on FreeBSD 10, and amd64 on earlier versions.
SSP_UNSAFE is added to disable in a port if it fails to build, but
this should only be used in rare circumstances such as kernel modules.
Otherwise, the port may just be failing due to lack of respecting
LDFLAGS.
On FreeBSD 10, this uses an ldscript in /usr/lib/libc.so to pull in
libssp_nonshared.a to address issues linking on i386 [1].
On earlier FreeBSD versions the WITH_SSP knob will add -lssp_nonshared
to LDFLAGS on i386. This is not needed on amd64. However, several hundred
ports do not currently respect LDFLAGS, so this support is disabled currently
as it causes build failures if a dependency is looking for the stack_chk
symbols.
Many thanks to jlh@ for this as he had many years of patience in getting
all of the necessary pieces [1][2] in.
[1] http://svnweb.freebsd.org/base/head/lib/libc/libc.ldscript?revision=251668&view=markup
PR: ports/138228 [2]
Submitted by: jlh (bsd.ssp.mk based on)
Reviewed by: bapt
With hat: portmgr
exp-runs done: 37 over a month on 91i386,91amd64,10i386,10amd64
after r254273
- Fix a bunch of ports to properly work after this
- Mark converters/libiconv as IGNORE for systems with iconv in libc
Reviewed by: bapt
Approved by: portmgr (bapt)
Discussed with: bapt, bsam (who both contributed ideas and code)
and lang/python2 and lang/python3. This change brings us closer to the goal
of making Python ports usable with different Python versions at the same
time.
- Add a new lang/python2 port to handle the symlinks for bin/python2,
bin/idle2, bin/pydoc2 and so on.
- Add a new lang/python3 port to handle the symlinks for bin/python3,
bin/idle3, bin/pydoc3 and so on.
- Bump the PORTREVISION on all lang/python* ports.
to ${DATADIR} since the port provides not a python module and/or library
but an application;
. bump PORTREVISION to all eric4 ports (including i18n ones).
Pointed out by: dbn (at freebsd-python@)
This update updates Glib20 to 2.36 and Gtk+ 3.8
* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
It is replaced by a GIO kqueue implementation developed as part of a NetBSD
GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
prevent creation of / root/.cache dir. Defaults to build & run depend,
but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
pangox support which was removed from the pango port. Add it to ports still
using pangox API.
Exp-run by: bapt@
PR: ports/178958 [1]
Submitted by: emaste@ [1]
This is a security release by upstream, and requires configuration changes
in addition to the software update. See UPDATING.
Reviewed by: ports-security (zi, remko)
Approved by: hrs (mentor, ports committer)
- bump PORTREVISION
- add UPDATING entry
- add an option to enable python support (both client and server
need to be rebuilt with this)
Dan's submission is based on:
PR: 170882
Submitted by: Michael Carlson <mike@bayphoto.com>
PR: 171818
Submitted by: Florian Ermisch <floh.edo@googlemail.com>
PR: 177331
Submitted by: Dan Langille <dan@langille.org> (maintainer)
option defaults to yes during interactive installation, and the crontab
file is not installed during non-interactive installation.
Requested by: espen@tagestad.no (via email)
- Update to 2.2.1
- Copy old version to www/zend-framework1
- Chase mail/squirrelmail-postfixadmin-plugin dependency
- Take maintainership
If you wish to stay with the older version run:
# portmaster -o www/zend-framework1 www/zend-framework
or
# portupgrade -fo www/zend-framework1 www/zend-framework
or
# pkg set -o www/zend-framework:www/zend-framework1
PR: ports/179689
Submitted by: wg (myself)
Approved by: maintainer
As mentioned in r322300, clang support has been improved since the update to
4.10.4 a few days ago.
This, however, requires a rebuild of the ports that depend on kdelibs4. Most
of them are covered by the KDE update itself, but those which are not part
of the Software Compilation need to be rebuilt manually to make sure the
previous issues (proper symbol visibility being the most annoying of them)
are solved.
I haven't fully tested all the possible portmaster/portupgrade/pkg commands
myself, so please shout out loud if they're not correct.
In collaboration with: avilla@
Some cleanups and fixes needed.
Original comment from shurd@sasktel.net
I noticed that the new version allows uploading directly from the tqsl
app, so I've updated the port. The tqsllib is no longer a separate
package from upstream, so I added the CONFLICTS_INSTALL for it. A note
will be needed in ports/UPDATING regarding this.
Submitted by: Stephen Hurd <shurd@sasktel.net>
The option dialog will not appear if all options have been configured
before, either using the dialog or in make.conf. This means you can set
options once for all ports in make.conf and not have dialogs pop up if
those are the only options.
Also let config-conditional run make config instead of do-config. Make
config handles NO_DIALOG and pre-config.
Discussed with: danfe
Approved by: portmgr (bapt)
