dt-bindings: Remove leading 0x from bindings notation

Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd34

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Mathieu Malaterre 2017-11-29 21:55:15 +01:00 committed by Rob Herring
parent 6de67de326
commit 4c9847b737
73 changed files with 99 additions and 99 deletions

View file

@ -15,7 +15,7 @@ Required properties:
Example:
ccn@0x2000000000 {
ccn@2000000000 {
compatible = "arm,ccn-504";
reg = <0x20 0x00000000 0 0x1000000>;
interrupts = <0 181 4>;

View file

@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
Example:
device_x@0x4a023000 {
device_x@4a023000 {
/* Crossbar 8 used */
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...

View file

@ -8,7 +8,7 @@ Required properties:
- interrupts : Should contain MC General interrupt.
Example:
memory-controller@0x7000f000 {
memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;

View file

@ -17,7 +17,7 @@ Optional properties:
- clock-output-names : From common clock binding.
Example:
clock@0xff000000 {
clock@ff000000 {
compatible = "adi,axi-clkgen";
#clock-cells = <0>;
reg = <0xff000000 0x1000>;

View file

@ -23,7 +23,7 @@ Example:
clocks = <&clk_osc>;
};
aux: aux@0x7e215004 {
aux: aux@7e215004 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;

View file

@ -24,7 +24,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10030000 {
clock: clock-controller@10030000 {
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;

View file

@ -22,7 +22,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;

View file

@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
#clock-cells = <0>;
};
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5410-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;

View file

@ -23,7 +23,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5420-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;

View file

@ -21,7 +21,7 @@ tree sources.
Example: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x10000>;
#clock-cells = <1>;

View file

@ -14,7 +14,7 @@ Required properties:
Example:
pllctrl: pll-controller@0x02310000 {
pllctrl: pll-controller@02310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};

View file

@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
for the full list of zx296702 clock IDs.
topclk: topcrm@0x09800000 {
topclk: topcrm@09800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
uart0: serial@0x09405000 {
uart0: serial@09405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

View file

@ -456,7 +456,7 @@ System ON/OFF key driver
Definition: this is phandle to the register map node.
EXAMPLE:
snvs-pwrkey@0x020cc000 {
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <0 4 0x4>
@ -545,7 +545,7 @@ FULL EXAMPLE
interrupts = <93 2>;
};
snvs-pwrkey@0x020cc000 {
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&sec_mon>;
interrupts = <0 4 0x4>;

View file

@ -9,7 +9,7 @@ Required properties:
- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
Example:
dfi: dfi@0xff630000 {
dfi: dfi@ff630000 {
compatible = "rockchip,rk3399-dfi";
reg = <0x00 0xff630000 0x00 0x4000>;
rockchip,pmu = <&pmugrf>;

View file

@ -27,7 +27,7 @@ Optional properties:
Example:
fb0: fb@0x00500000 {
fb0: fb@00500000 {
compatible = "atmel,at91sam9g45-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 3 0>;
@ -41,7 +41,7 @@ Example:
Example for fixed framebuffer memory:
fb0: fb@0x00500000 {
fb0: fb@00500000 {
compatible = "atmel,at91sam9263-lcdc";
reg = <0x00700000 0x1000 0x70000000 0x200000>;
[...]

View file

@ -73,7 +73,7 @@ Hypervisor OS configuration:
max-read-transactions = <31>;
channel-reset-timeout-cycles = <0x500>;
hidma_24: dma-controller@0x5c050000 {
hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;
@ -85,7 +85,7 @@ Hypervisor OS configuration:
Guest OS configuration:
hidma_24: dma-controller@0x5c050000 {
hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;

View file

@ -13,7 +13,7 @@ Required properties:
Example:
Controller:
dma: dma-controller@0x09c00000{
dma: dma-controller@09c00000{
compatible = "zte,zx296702-dma";
reg = <0x09c00000 0x1000>;
clocks = <&topclk ZX296702_DMA_ACLK>;

View file

@ -30,7 +30,7 @@ Optional properties:
Example:
gpio_altr: gpio@0xff200000 {
gpio_altr: gpio@ff200000 {
compatible = "altr,pio-1.0";
reg = <0xff200000 0x10>;
interrupts = <0 45 4>;

View file

@ -18,7 +18,7 @@ Optional properties:
Example
/ {
i2c4: i2c4@0x10054000 {
i2c4: i2c4@10054000 {
compatible = "ingenic,jz4780-i2c";
reg = <0x10054000 0x1000>;

View file

@ -10,7 +10,7 @@ Required properties:
Example:
hp03@0x77 {
hp03@77 {
compatible = "hoperf,hp03";
reg = <0x77>;
xclr-gpio = <&portc 0 0x0>;

View file

@ -15,7 +15,7 @@ Optional properties:
Example:
i2c@80110000 {
bu21013_tp@0x5c {
bu21013_tp@5c {
compatible = "rohm,bu21013_tp";
reg = <0x5c>;
touch-gpio = <&gpio2 20 0x4>;

View file

@ -155,7 +155,7 @@ Example:
<0x0 0xe112f000 0 0x02000>,
<0x0 0xe1140000 0 0x10000>,
<0x0 0xe1160000 0 0x10000>;
v2m0: v2m@0x8000 {
v2m0: v2m@8000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x80000 0 0x1000>;
@ -163,7 +163,7 @@ Example:
....
v2mN: v2m@0x9000 {
v2mN: v2m@9000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x90000 0 0x1000>;

View file

@ -71,7 +71,7 @@ Example 2:
* An interrupt generating device that is wired to a Meta external
* trigger block.
*/
uart1: uart@0x02004c00 {
uart1: uart@02004c00 {
// Interrupt source '5' that is level-sensitive.
// Note that there are only two cells as specified in the
// interrupt parent's '#interrupt-cells' property.

View file

@ -51,7 +51,7 @@ Example 1:
/*
* TZ1090 PDC block
*/
pdc: pdc@0x02006000 {
pdc: pdc@02006000 {
// This is an interrupt controller node.
interrupt-controller;

View file

@ -39,7 +39,7 @@ Example:
The following is an example from the SPEAr320 SoC dtsi file.
shirq: interrupt-controller@0xb3000000 {
shirq: interrupt-controller@b3000000 {
compatible = "st,spear320-shirq";
reg = <0xb3000000 0x1000>;
interrupts = <28 29 30 1>;

View file

@ -14,7 +14,7 @@ Optional properties:
depends on the interrupt controller parent.
Example:
mbox_tx: mailbox@0x100 {
mbox_tx: mailbox@100 {
compatible = "altr,mailbox-1.0";
reg = <0x100 0x8>;
interrupt-parent = < &gic_0 >;
@ -22,7 +22,7 @@ Example:
#mbox-cells = <1>;
};
mbox_rx: mailbox@0x200 {
mbox_rx: mailbox@200 {
compatible = "altr,mailbox-1.0";
reg = <0x200 0x8>;
interrupt-parent = < &gic_0 >;
@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
used to give a name to the communication channel to be used by the client user.
Example:
mclient0: mclient0@0x400 {
mclient0: mclient0@400 {
compatible = "client-1.0";
reg = <0x400 0x10>;
mbox-names = "mbox-tx", "mbox-rx";

View file

@ -15,7 +15,7 @@ Optional properties:
- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
Example:
pdc0: iproc-pdc0@0x612c0000 {
pdc0: iproc-pdc0@612c0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;

View file

@ -17,7 +17,7 @@ Optional properties:
Example:
gsc_0: gsc@0x13e00000 {
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5250-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;

View file

@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
"vdec_bus_clk_src";
};
vcodec_enc: vcodec@0x18002000 {
vcodec_enc: vcodec@18002000 {
compatible = "mediatek,mt8173-vcodec-enc";
reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/

View file

@ -44,7 +44,7 @@ Device node example
vin0 = &vin0;
};
vin0: vin@0xe6ef0000 {
vin0: vin@e6ef0000 {
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;

View file

@ -138,7 +138,7 @@ Example:
};
/* MIPI CSI-2 bus IF sensor */
s5c73m3: sensor@0x1a {
s5c73m3: sensor@1a {
compatible = "samsung,s5c73m3";
reg = <0x1a>;
vddio-supply = <...>;

View file

@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
Example:
ceu0: ceu@0xfe910000 {
ceu0: ceu@fe910000 {
compatible = "renesas,sh-mobile-ceu";
reg = <0xfe910000 0xa0>;
interrupt-parent = <&intcs>;

View file

@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
'port' node which may indicate that at any time only one of the following data
pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
ceu0: ceu@0xfe910000 {
ceu0: ceu@fe910000 {
compatible = "renesas,sh-mobile-ceu";
reg = <0xfe910000 0xa0>;
interrupts = <0x880>;
@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
i2c0: i2c@0xfff20000 {
i2c0: i2c@fff20000 {
...
ov772x_1: camera@0x21 {
ov772x_1: camera@21 {
compatible = "ovti,ov772x";
reg = <0x21>;
vddio-supply = <&regulator1>;
@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
imx074: camera@0x1a {
imx074: camera@1a {
compatible = "sony,imx074";
reg = <0x1a>;
vddio-supply = <&regulator1>;
@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
csi2: csi2@0xffc90000 {
csi2: csi2@ffc90000 {
compatible = "renesas,sh-mobile-csi2";
reg = <0xffc90000 0x1000>;
interrupts = <0x17a0>;

View file

@ -46,7 +46,7 @@ Optional properties:
Example:
emif1: emif@0x4c000000 {
emif1: emif@4c000000 {
compatible = "ti,emif-4d";
ti,hwmods = "emif2";
phy-type = <1>;

View file

@ -13,7 +13,7 @@ Required properties:
Example:
devctrl: device-state-control@0x02620000 {
devctrl: device-state-control@02620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
};

View file

@ -9,7 +9,7 @@ Required properties:
- reg : Location and size of bounce buffer
Example:
smc@0x3404c000 {
smc@3404c000 {
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; //1 KiB in SRAM
};

View file

@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
sdio2: sdio@0x3f1a0000 {
sdio2: sdio@3f1a0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
clocks = <&sdio3_clk>;

View file

@ -24,7 +24,7 @@ Optional properties:
Example:
sdhci0: sdhci@0x18041000 {
sdhci0: sdhci@18041000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x18041000 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;

View file

@ -55,7 +55,7 @@ Examples:
[hwmod populated DMA resources]
mmc1: mmc@0x4809c000 {
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
@ -67,7 +67,7 @@ Examples:
[generic DMA request binding]
mmc1: mmc@0x4809c000 {
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";

View file

@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
label = "bootloader-nor";
reg = <0 0x40000>;
};
partition@0x40000 {
partition@40000 {
label = "params-nor";
reg = <0x40000 0x40000>;
};
partition@0x80000 {
partition@80000 {
label = "kernel-nor";
reg = <0x80000 0x200000>;
};
partition@0x280000 {
partition@280000 {
label = "filesystem-nor";
reg = <0x240000 0x7d80000>;
};

View file

@ -131,7 +131,7 @@ Example:
read-only;
reg = <0x00000000 0x00400000>;
};
android@0x00400000 {
android@00400000 {
label = "android";
reg = <0x00400000 0x12c00000>;
};

View file

@ -52,7 +52,7 @@ Optional properties:
Example:
tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
tse_sub_0_eth_tse_0: ethernet@1,00000000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00000000 0x00000400>,
<0x00000001 0x00000460 0x00000020>,
@ -90,7 +90,7 @@ Example:
};
};
tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
tse_sub_1_eth_tse_0: ethernet@1,00001000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00001000 0x00000400>,
<0x00000001 0x00001460 0x00000020>,

View file

@ -18,7 +18,7 @@ Example :
This example shows these optional properties, plus other properties
required for the TI Davinci MDIO driver.
davinci_mdio: ethernet@0x5c030000 {
davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
reg = <0x5c030000 0x1000>;
#address-cells = <1>;

View file

@ -28,7 +28,7 @@ Required properties:
Example:
gmii_to_sgmii_converter: phy@0x100000240 {
gmii_to_sgmii_converter: phy@100000240 {
compatible = "altr,gmii-to-sgmii-2.0";
reg = <0x00000001 0x00000240 0x00000008>,
<0x00000001 0x00000200 0x00000040>;

View file

@ -36,7 +36,7 @@ Optional properties:
Example:
cpu@0x0 {
cpu@0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0>;

View file

@ -25,7 +25,7 @@ Optional properties:
- bus-range: PCI bus numbers covered
Example
pcie_0: pcie@0xc00000000 {
pcie_0: pcie@c00000000 {
compatible = "altr,pcie-root-port-1.0";
reg = <0xc0000000 0x20000000>,
<0xff220000 0x00004000>;

View file

@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
Example:
pcie@0x01000000 {
pcie@01000000 {
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
reg = <0x01ffc000 0x04000>,
<0x01f00000 0x80000>;

View file

@ -21,7 +21,7 @@ Optional properties:
- dma-coherent: Present if DMA operations are coherent.
Hip05 Example (note that Hip06 is the same except compatible):
pcie@0xb0080000 {
pcie@b0080000 {
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
reg-names = "rc_dbi", "config";

View file

@ -45,7 +45,7 @@ Optional properties:
- usb3_vbus-supply : regulator phandle for controller usb3 vbus
Example:
usbphy: phy@0x01c13400 {
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
/* phy base regs, phy1 pmu reg, phy2 pmu reg */

View file

@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
For example:
pinmux: pinmux@0x0301d0c8 {
pinmux: pinmux@0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x1b0>;

View file

@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
For a specific board, if it wants to use sd1,
it can add the following to its board-specific .dts file.
sd1: sd@0x12340000 {
sd1: sd@12340000 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pmx0>;
}
or
sd1: sd@0x12340000 {
sd1: sd@12340000 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pmx1>;
}

View file

@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
For a specific board, if it wants to use uart2 without hardware flow control,
it can add the following to its board-specific .dts file.
uart2: uart@0xb0070000 {
uart2: uart@b0070000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_noflow_pins_a>;
}

View file

@ -136,7 +136,7 @@ Example for rk3188:
#size-cells = <1>;
ranges;
gpio0: gpio0@0x2000a000 {
gpio0: gpio0@2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@ -149,7 +149,7 @@ Example for rk3188:
#interrupt-cells = <2>;
};
gpio1: gpio1@0x2003c000 {
gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;

View file

@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
...
};
mmc: mmc@0x0 {
mmc: mmc@0 {
...
...
vmmc-supply = <&twl_reg1>;

View file

@ -12,7 +12,7 @@ Optional properties:
Example:
uart@0x4000c400 {
uart@4000c400 {
compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15>;

View file

@ -14,7 +14,7 @@ Required properties:
Example:
ps20: ps2@0x01c2a000 {
ps20: ps2@01c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <0 62 4>;

View file

@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdsp0@0x2a10000 {
pdsp0@2a10000 {
reg = <0x2a10000 0x1000>,
<0x2a0f000 0x100>,
<0x2a0c000 0x3c8>,

View file

@ -21,7 +21,7 @@ please check:
Example:
i2s: i2s@0x77600000 {
i2s: i2s@77600000 {
compatible = "adi,axi-i2s-1.00.a";
reg = <0x77600000 0x1000>;
clocks = <&clk 15>, <&audio_clock>;

View file

@ -20,7 +20,7 @@ please check:
Example:
spdif: spdif@0x77400000 {
spdif: spdif@77400000 {
compatible = "adi,axi-spdif-tx-1.00.a";
reg = <0x77600000 0x1000>;
clocks = <&clk 15>, <&audio_clock>;

View file

@ -20,7 +20,7 @@ Optional properties:
Example:
&i2c {
ak4613: ak4613@0x10 {
ak4613: ak4613@10 {
compatible = "asahi-kasei,ak4613";
reg = <0x10>;
};

View file

@ -17,7 +17,7 @@ Optional properties:
Example 1:
&i2c {
ak4648: ak4648@0x12 {
ak4648: ak4648@12 {
compatible = "asahi-kasei,ak4642";
reg = <0x12>;
};

View file

@ -10,7 +10,7 @@ Required properties:
Example:
&i2c {
max98371: max98371@0x31 {
max98371: max98371@31 {
compatible = "maxim,max98371";
reg = <0x31>;
};

View file

@ -10,7 +10,7 @@ Required properties:
Example:
&i2c {
max9867: max9867@0x18 {
max9867: max9867@18 {
compatible = "maxim,max9867";
reg = <0x18>;
};

View file

@ -20,7 +20,7 @@ Required properties:
Example:
sh_fsi2: sh_fsi2@0xec230000 {
sh_fsi2: sh_fsi2@ec230000 {
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupts = <0 146 0x4>;

View file

@ -33,7 +33,7 @@ Required properties on RK3288:
Example for the rk3188 SPDIF controller:
spdif: spdif@0x1011e000 {
spdif: spdif@1011e000 {
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
reg = <0x1011e000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;

View file

@ -51,7 +51,7 @@ Optional properties:
Example:
sti_uni_player1: sti-uni-player@0x8D81000 {
sti_uni_player1: sti-uni-player@8D81000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@ -63,7 +63,7 @@ Example:
st,tdm-mode = <1>;
};
sti_uni_player2: sti-uni-player@0x8D82000 {
sti_uni_player2: sti-uni-player@8D82000 {
compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@ -74,7 +74,7 @@ Example:
dma-names = "tx";
};
sti_uni_player3: sti-uni-player@0x8D85000 {
sti_uni_player3: sti-uni-player@8D85000 {
compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@ -85,7 +85,7 @@ Example:
dma-names = "tx";
};
sti_uni_reader1: sti-uni-reader@0x8D84000 {
sti_uni_reader1: sti-uni-reader@8D84000 {
compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;

View file

@ -19,7 +19,7 @@ Recommended properties :
Example:
spi1: spi@0x4000c400 { /* USART1 */
spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "energymicro,efm32-spi";

View file

@ -239,7 +239,7 @@ cpus {
* A simple fan controller which supports 10 speeds of operation
* (represented as 0-9).
*/
fan0: fan@0x48 {
fan0: fan@48 {
...
cooling-min-level = <0>;
cooling-max-level = <9>;
@ -252,7 +252,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
bandgap0: bandgap@0x0000ED00 {
bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <0>;
};
@ -330,7 +330,7 @@ ocp {
/*
* A simple IC with several bandgap temperature sensors.
*/
bandgap0: bandgap@0x0000ED00 {
bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <1>;
};
@ -447,7 +447,7 @@ one thermal zone.
/*
* A simple IC with a single temperature sensor.
*/
adc: sensor@0x49 {
adc: sensor@49 {
...
#thermal-sensor-cells = <0>;
};
@ -458,7 +458,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
bandgap0: bandgap@0x0000ED00 {
bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <0>;
};
@ -516,7 +516,7 @@ with many sensors and many cooling devices.
/*
* An IC with several temperature sensor.
*/
adc_dummy: sensor@0x50 {
adc_dummy: sensor@50 {
...
#thermal-sensor-cells = <1>; /* sensor internal ID */
};

View file

@ -32,7 +32,7 @@ Optional properties:
Example:
ufsphy1: ufsphy@0xfc597000 {
ufsphy1: ufsphy@fc597000 {
compatible = "qcom,ufs-phy-qmp-20nm";
reg = <0xfc597000 0x800>;
reg-names = "phy_mem";
@ -53,7 +53,7 @@ Example:
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
};
ufshc@0xfc598000 {
ufshc@fc598000 {
...
phys = <&ufsphy1>;
phy-names = "ufsphy";

View file

@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
regulators or clocks are always on.
Example:
ufshc@0xfc598000 {
ufshc@fc598000 {
compatible = "jedec,ufs-1.1";
reg = <0xfc598000 0x800>;
interrupts = <0 28 0>;

View file

@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
Example:
ehci1: usb@0xfe203e00 {
ehci1: usb@fe203e00 {
compatible = "st,st-ehci-300x";
reg = <0xfe203e00 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;

View file

@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
Example:
ohci0: usb@0xfe1ffc00 {
ohci0: usb@fe1ffc00 {
compatible = "st,st-ohci-300x";
reg = <0xfe1ffc00 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;

View file

@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers
Example:
watchdog: jz4740-watchdog@0x10002000 {
watchdog: jz4740-watchdog@10002000 {
compatible = "ingenic,jz4740-watchdog";
reg = <0x10002000 0x100>;
};