Commit graph

27 commits

Author SHA1 Message Date
Krishna Gudipati
227fab90bf [SCSI] bfa: Flash Controller PLL initialization fixes
- Made changes to check the flash controller status before IOC initialization.
- Made changes to poll on the FLASH_STS_REG bit to check if the flash controller
  initialization is completed during the PLL init.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:12:12 +01:00
Krishna Gudipati
7ac83b1fd0 [SCSI] bfa: IOCFC state machine enhancements
- Add support to handle STOP/DISABLE events in the IOCFC state machine.
- Made changes to bring the IOC down on a flash driver config read failure.
- Added logic to clean the use count and fail sync registers during IOCFC init.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:11:13 +01:00
Krishna Gudipati
a6b963db0d [SCSI] bfa: Flash controller IOC pll init fixes.
Made changes to resume the flash controller if it is halted before going
ahead with flash controller pause/resume logic.
Made changes to avoid clearing off the interrupts during the initial
pll initialization.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28 09:54:32 +01:00
Krishna Gudipati
3fd459804f [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
- Introduced partitioning of the BFA resources.
- Added h/w queue ID in CPE messages, firmware uses h/w queue ID
  from messages to pick a matching RME queue.
- Added message header to bfa_reqq_produce(). h/w queue ID is set
  in the message header and firmware modules use h/w queue ID from
  message header instead of from cpqe event.
- Made changes to allow using all 256 queues of Brocade-1860 asic.
  Previously only a single queue per queue group was used.
- Added function tag to BFI message header. Only used by FC BFI
  messages.  Used to translate host tag to firmware tag. bfa_lpuid()
  is changed to bfa_fn_lpu() that encodes both PCI function and port
  ID in BFI message header.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 17:02:28 -05:00
Krishna Gudipati
10a0737924 [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
- If flash controller is halted unconditionally, this results in
  illegal write access to flash controller register domain. Since
  flash controller registers are only accessible once s_clk is started
  - added logic to check for WGN status and halt flash controller only
  if it is already running.
- Added check to wait for flash controller halt to be completed before
  proceeding with s_clk/l_clk initializations.
- Removed unnecessary reset logic for PMM 1T memory and moved memory
  initialization after flash access enable.
- Disable Brocade-1860 asic MBOX interrupt before PLL initialization.
- Remove reset enable for S_CLK/L_CLK after both PLL initializations
  are complete.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 16:59:59 -05:00
Krishna Gudipati
5a0adaedff [SCSI] bfa: IOC bug fixes.
- Add logic to handle the case where PCI mapping goes away when
  IOCPF state machine is waiting for semaphore.
- Added logic to unlock hw semaphore if the previos FW boot was
  from flash based and the current FW initialization attempt is from OS.
- Added fix to update hbfails and hb_count stats during hwerror event.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 16:57:52 -05:00
Krishna Gudipati
8b070b4a02 [SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes.
- Added support for 16Gbps.
- Added logic to flush pending mailbox command queue when IOC is disabled.
- Fix to Halt the flash controller during fw initialization - since
  when asic blck is programmed flash controller's continuous access
  blocks f/w access to flash.
- Added new asic based card types and modified IOC get card model routine.
- Added PLL init fix to do LPU reset every time we do a memory
  initialization, since not doing so will cause LPU to be
  uninitialized during driver load.
- Added fix to Halt flash controller before PLL initialization.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 15:50:50 -05:00
Krishna Gudipati
775c7742ad [SCSI] bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.
- Introduced IOC poll mechanism which replaces current interrupt
  based FW READY method.
- The timer based poll routine in IOC will query the ioc_fwstate
  register to see if there is a state change in FW, and sends the READY event.
- Bug fixes in the new asic PLL initialization.
- Added logic to handle CPE/RME queue interrupts before iocfc config done.
  1. Use the queue_process flag to see if iocfc configuration is done
     in INTX mode.
  2. Split the MSIX handler installation in two - one for IOC intr
     handler and the other for cpe/rme queue handler - and delay
     assigning queue handlers until iocfc config is done in MSIX mode.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 15:46:19 -05:00
Krishna Gudipati
111892082e [SCSI] bfa: Brocade-1860 Fabric Adapter Hardware Enablement
- Added support for Brocade-1860 Fabric Adapter.
- Made changes to support single firmware image per asic type.
- Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with
  only minimal defines used by host.
- Added changes to setup CPE/RME Queue register offsets based on
  firmware response.
- Removed queue register offset initializations and added register offsets
  to BFI config response message.
- Added Brocade-1860 asic specific interrupt status definitions and
  mailbox interfaces.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 15:31:31 -05:00
Jing Huang
45d7f0cc58 [SCSI] bfa: kdump fix
Root cause: When kernel crashes, bfa IOC state machine and FW doesn't get
a notification and hence are not cleanly shutdown. So registers holding
driver/IOC state information are not reset back to valid disabled/parking
values. This causes subsequent driver initialization to hang during kdump
kernel boot.

Fix description: during the initialization of first PCI function, reset
corresponding register when unclean shutown is detect by reading chip
registers. This will make sure that ioc/fw gets clean re-initialization.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:38:02 -04:00
Jing Huang
8f4bfadd20 [SCSI] bfa: remove unused defintions and misc cleanups
This patch removes unused functions, data strucutres, and definitions.  It
also includes misc comment and formatting cleanups.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-31 09:43:31 -06:00
Jing Huang
d4b671c58e [SCSI] bfa: replace bfa_assert with WARN_ON
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-31 09:36:53 -06:00
Krishna Gudipati
f1d584d70f [SCSI] bfa: IOC auto recovery fix.
- Made IOC auto_recovery synchronized and not timer based.
- Only one PCI function will attempt to recover and reinitialize
  the ASIC on a failure, after all the active PCI fns
  acknowledge the IOC failure.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:37:15 -06:00
Maggie Zhang
f16a17507b [SCSI] bfa: remove all OS wrappers
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:32:56 -06:00
Maggie Zhang
f7f73812e9 [SCSI] bfa: clean up one line functions
Cleaned up one line functions.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:32:43 -06:00
Maggie
52f94b6fd0 [SCSI] bfa: fix regular sparse check warnings.
Fix all sparse check warnings from make C=2.

Signed-off-by: Maggie <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:16 -06:00
Jing Huang
5fbe25c7a6 [SCSI] bfa: fix comments for c files
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com)
regarding comment blocks that begining with "/**". bfa driver comments
currently do not follow kernel-doc convention, we hence replace all
/** with /* and **/ with */.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:28:09 -05:00
Jing Huang
5344026065 [SCSI] bfa: remove os wrapper functions and macros
This patch replaces register access functions and macros with the the ones
provided by linux.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:18:20 -05:00
Jing Huang
6a18b1675f [SCSI] bfa: remove os wrapper and unused functions
This patch removes os wrapper and unused functions.
bfa_os_assign(), bfa_os_memset(), bfa_os_memcpy(), bfa_os_udelay()
bfa_os_vsprintf(), bfa_os_snprintf(), and bfa_os_get_clock() are replaced with
direct assignment or native linux functions. Some unused functions related to VF
(Vitual fabric) are also removed.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:15:58 -05:00
Krishna Gudipati
a36c61f902 [SCSI] bfa: cleanup driver
We have flattened the BFA hierarchy and also reduced the number of
source and header files we used to have earlier.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16 22:54:24 -04:00
Jing Huang
df2a52a6c8 [SCSI] bfa: fix chip and memory initialization
Clear PSS memory reset that is set as part of power-on-reset (pci reset).
Complete PMM memory reset before BISTR start. Clear EDRAM BISTR start bit
after fixed delay. BISTR DONE bit status is not getting set. Use a fixed
1ms delay for BISTR now. Expose PMM IT memory definitions to host.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:04:15 -05:00
Jing Huang
293f82d59e [SCSI] bfa: enable new hardware
This patch enables support of new mezzanine cards for HP and IBM blade server.

- Add new pciids for HP and IBM mezzanine card.
- Add a new firmware image for HP mezzanine card, which is running in
  FC only mode. Rename firmware image to reflect the difference. Change the
  firmware download code accordingly for the above changes.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:04:03 -05:00
Krishna Gudipati
d1c61f8ef5 [SCSI] bfa: Remove unused header files and did some cleanup.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:27:51 +05:30
Krishna Gudipati
78f915f7b0 [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state.
Use dummy interrupt handlers till chip initialization is complete.
Install real interrupt handlers after chip initialization.

Also removed msix installation code in bfa_iocfc_init().

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:02:45 +05:30
Krishna Gudipati
816e49b8ed [SCSI] bfa: IOC recovery fix in fcmode.
ioc_recover failed to work in fcmode.

Fixed the code to initialize the ioc_regs.err_set during the
notify_hbfail.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:01:42 +05:30
Krishna Gudipati
8b651b4294 [SCSI] bfa: Clear LL_HALT and PSS_ERR bit when IOC crashes.
Clear LL_HALT and PSS_ERR bit in the interrupt status register on an IOC crash.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:53:53 +05:30
Krishna Gudipati
0a20de446c [SCSI] bfa: IOC changes: Support faster recovery and split bfa_ioc.c into ASIC specific code.
Add support for faster IOC recovery after failure.

Split bfa_ioc.c into three files:
  bfa_ioc.c:    Common code shared between crossbow and catapult ASIC's.

  bfa_ioc_cb.c: Code specific to the crossbow, reg mapping and
                interrupt related routines.

  bfa_ioc_ct.c: Code specific to the catapult, reg mapping and
                interrupt related routines.

Fix to make sure IOC reinitialize's properly on enable request -
update the ioc_fwstate reg with BFI_IOC_FAIL on ioc disable mbox cmd
timeout.

Makefile changes to support the 2 newly added files bfa_ioc_cb.c and
bfa_ioc_ct.c.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:49:48 +05:30