TPS65912 has five GPIOs that can be configured for different
purposes.
Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This module controls the interrupt handling for the tps65912.
The interrupt sources can be the following:
- GPIO
- PWRON signal
- PWRHOLD signal
- Temperature detection
Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The tps65912 chip is a power management IC. It contains the following
components:
- Regulators
- GPIO controller
The core driver is registered as a platform driver, it provides communication
through I2C and SPI interfaces.
Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use the generic irq chip framework for implementing the irq chip for
the jz4740-adc driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Even if we would've BUG()ed we should still tidy up after ourselves if that
isn't enabled in the kernel config.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When the byte swap was factored out into the per-register I/O functions
the register restore for the IRQ mask cache (which we use and store in
CPU native format for the interrupt handler) was not updated to do a byte
swap when it uses the bulk I/O. Fix this by writing the cache out one
register at a time.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The WM831x AUXADC hardware can schedule multiple conversions at once,
allowing higher performance when more than one source is in use as we
can have the hardware start new conversions without having to wait for
a register write.
Take advantage of this in the interrupt driven case, maintaining a list of
callers that are waiting for AUXADC conversions and completing them all
simultaneously. The external interface of the AUXADC is not changed so
there will be limited use of the feature immediately.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Switch on the device type before revision since anything we do here will
be device as well as revision specific.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This allows boards to leave the irq_base field unitialized and
prevents them having to reserve irqs in the platform.
pdata can be optional for irq support now. Without pdata the
driver allocates some free irq range. With pdata and irq_base > 0
the driver allocates exactly the specified irq.
Without pdata the irq defaults to IRQF_TRIGGER_LOW.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In preparation for some additional work on the wm831x AUXADC code move the
support into a separate file. This is a simple code motion patch, there
should be no functional changes.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Ensure that there's no possibility of loosing an AUXADC interrupt by reading
the conversion result in the IRQ handler when using interrupts. Otherwise
it's possible that under very heavy load a new conversion could be initiated
before the acknowledgement for a previous interrupt has happened.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use irq_allocate_desc() to get the IRQ range, which turns into a noop on
non-sparse systems. Since all existing users are non-sparse there should
be no compatibility issues.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only
be enabled via OTP or InstantConfig, not runtime software) the RTC can't
function.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow platform data to flag the touchscreen as disabled so that if the
touch driver is built in we don't end up causing lots of work by spuriously
detecting touchscreen activity on systems where it isn't in use.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Systems using this functionality will be uncommon.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The WM831x IRQ set_type() operation is doing a direct register write when
called but since set_type() is called with the bus lock held this isn't
legal and could cause deadlocks in the IRQ core.
Fix this by posting the updates into an array and syncing in the
bus_sync_unlock() callback.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* git://git.infradead.org/battery-2.6:
gpio-charger: Fix checking return value of request_any_context_irq
power_supply: MAX17042: Support additional properties
max8903_charger: Allow platform data to be __initdata
power_supply: Add charger driver for MAX8998/LP3974
power_supply: Add charger driver for MAX8997/8966
max17042_battery: Remove obsolete cleanup for clientdata
twl4030_charger: Fix warnings
wm831x_power: Support multiple instances
wm831x_backup: Support multiple instances
apm_power: Fix style error in macros
s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()
bq20z75: Enable detection after registering
bq20z75: Add support for external notification
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
cpupower: Do detect IDA (opportunistic processor performance) via cpuid
cpupower: Show Intel turbo ratio support via ./cpupower frequency-info
cpupowerutils: increase MAX_LINE_LEN
cpupower: Rename package from cpupowerutils to cpupower
cpupowerutils: Rename: libcpufreq->libcpupower
cpupowerutils: use kernel version-derived version string
cpupowerutils: utils - ConfigStyle bugfixes
cpupowerutils: helpers - ConfigStyle bugfixes
cpupowerutils: idle_monitor - ConfigStyle bugfixes
cpupowerutils: lib - ConfigStyle bugfixes
cpupowerutils: bench - ConfigStyle bugfixes
cpupowerutils: do not update po files on each and every compile
cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism
cpupowerutils: use COPYING, CREDITS from top-level directory
cpupowerutils - cpufrequtils extended with quite some features
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
smc91c92_cs.c: fix bogus compiler warning
orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002
hostap_cs: support cards with "Version 01.02" as third product ID
pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3
pxa2xx pcmcia - stargate 2 use gpio array.
pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
For invalid extents, find other pages in the same fsblock and write them out.
[pnfsblock: write_begin]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.
When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.
[pnfsblock: bl_write_pagelist support functions]
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
[SQUASHME: pnfsblock: mds_offset is set in the generic layer]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fixup blksize alignment in bl_setup_layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.
When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.
[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: read path error handling]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: Zhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new read_pagelist api]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
extents list, for reads.
In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:
1. On setup_layoutcommit, the range is adjusted as before
and a structure is allocated for communication with
bl_encode_layoutcommit && bl_cleanup_layoutcommit
(Generic layer provides a void-star to hang it on)
2. bl_encode_layoutcommit is called to do the actual
encoding directly into xdr. The commit-extent-list is not
freed and is stored on above structure.
FIXME: The code is not yet converted to the new XDR cleanup
3. On cleanup the commit-extent-list is put back by a call
to set_to_rw() as before, but with no need for XDR decoding
of the list as before. And the commit-extent-list is freed.
Finally allocated structure is freed.
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
[pnfsblock: introduce bl_committing list]
Signed-off-by: Peng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: cleanup_layoutcommit wants a status parameter]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
extents list, for reads.
In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:
1. On setup_layoutcommit, the range is adjusted as before
and a structure is allocated for communication with
bl_encode_layoutcommit && bl_cleanup_layoutcommit
(Generic layer provides a void-star to hang it on)
2. bl_encode_layoutcommit is called to do the actual
encoding directly into xdr. The commit-extent-list is not
freed and is stored on above structure.
FIXME: The code is not yet converted to the new XDR cleanup
3. On cleanup the commit-extent-list is put back by a call
to set_to_rw() as before, but with no need for XDR decoding
of the list as before. And the commit-extent-list is freed.
Finally allocated structure is freed.
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: prevent commit list corruption]
[pnfsblock: fix layoutcommit with an empty opaque]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds working implementations of various support functions
to handle INVAL extents, needed by writes, such as
bl_mark_sectors_init and bl_is_sector_init.
[pnfsblock: fix 64-bit compiler warnings for extent manipulation]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[Implement release_inval_marks]
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement bl_find_get_extent(), one of the core extent manipulation
routines.
[pnfsblock: Lookup list entry of layouts and tags in reverse order]
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
pnfsblock: fix print format warnings for sector_t and size_t
gcc spews warnings about these on x86_64, e.g.:
fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’
fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
XDR decodes the block layout payload sent in LAYOUTGET result, storing
the result in an extent list.
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace a stub, so that extents underlying the layouts are properly
added, merged, or ignored as necessary.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: delete the new node before put it]
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.
[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Using NFS4_MAX_UINT64 will break current protocol.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There can be multiple lseg per file, so layoutcommit should be
able to handle it.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
