2012-11-11 22:29:04 +01:00
|
|
|
# $NetBSD: Makefile,v 1.53 2012/11/11 21:29:04 jnemeth Exp $
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
#
|
|
|
|
|
# NOTE: when updating this package, there are two places that sound
|
|
|
|
|
# tarballs need to be checked
|
|
|
|
|
|
2012-11-11 22:29:04 +01:00
|
|
|
DISTNAME= asterisk-1.8.18.0
|
Upgrade to 1.8.4.2. This fixes several security issues including:
AST-2011-002, AST-2011-003, AST-2011-004, AST-2011-005, AST-2011-006,
and AST-2011-007.
pkgsrc changes:
- add patch for autosupport script; == -> =
- patch configure to not unconditionally set PBX_LAUNCHD=1
- this allows res_timing_kqueue.so to build
This last change brings a timing source to NetBSD which allows IAX
trunking and allows the bridging modules to work, a rather major
piece that was missing. Note that I haven't extensively tested
it. But, have at it...
===========================================================================
1.8.4.2:
The Asterisk Development Team has announced the release of Asterisk
version 1.8.4.2, which is a security release for Asterisk 1.8.
The release of Asterisk 1.8.4.2 resolves an issue with SIP URI parsing
which can lead to a remotely exploitable crash:
Remote Crash Vulnerability in SIP channel driver (AST-2011-007)
The issue and resolution is described in the AST-2011-007 security
advisory.
For more information about the details of this vulnerability, please
read the security advisory AST-2011-007, which was released at the same
time as this announcement.
For a full list of changes in the current release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.4.2
Security advisory AST-2011-007 is available at:
http://downloads.asterisk.org/pub/security/AST-2011-007.pdf
===========================================================================
1.8.4.1:
The Asterisk Development Team has announced the release of Asterisk 1.8.4.1.
The release of Asterisk 1.8.4.1 resolves several issues reported by the
community. Without your help this release would not have been possible.
Thank you!
Below is a list of issues resolved in this release:
* Fix our compliance with RFC 3261 section 18.2.2. (aka Cisco phone fix)
* Resolve a change in IPv6 header parsing due to the Cisco phone fix issue.
This issue was found and reported by the Asterisk test suite.
* Resolve potential crash when using SIP TLS support.
* Improve reliability when using SIP TLS.
For a full list of changes in this release candidate, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.4.1
===========================================================================
1.8.4:
The Asterisk Development Team has announced the release of Asterisk 1.8.4.
The release of Asterisk 1.8.4 resolves several issues reported by the community.
Without your help this release would not have been possible. Thank you!
Below is a sample of the issues resolved in this release:
* Use SSLv23_client_method instead of old SSLv2 only.
* Resolve crash in ast_mutex_init()
* Resolution of several DTMF based attended transfer issues.
NOTE: Be sure to read the ChangeLog for more information about these changes.
* Resolve deadlocks related to device states in chan_sip
* Resolve an issue with the Asterisk manager interface leaking memory when
disabled.
* Support greetingsfolder as documented in voicemail.conf.sample.
* Fix channel redirect out of MeetMe() and other issues with channel softhangup
* Fix voicemail sequencing for file based storage.
* Set hangup cause in local_hangup so the proper return code of 486 instead of
503 when using Local channels when the far sides returns a busy. Also affects
CCSS in Asterisk 1.8+.
* Fix issues with verbose messages not being output to the console.
* Fix Deadlock with attended transfer of SIP call
Includes changes per AST-2011-005 and AST-2011-006
For a full list of changes in this release candidate, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.4
Information about the security releases are available at:
http://downloads.asterisk.org/pub/security/AST-2011-005.pdf
http://downloads.asterisk.org/pub/security/AST-2011-006.pdf
===========================================================================
1.8.3.3:
The Asterisk Development Team has announced security releases for Asterisk
branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are
released as versions 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3.
The releases of Asterisk 1.4.40.1, 1.6.1.25, 1.6.2.17.3, and 1.8.3.3 resolve two
issues:
* File Descriptor Resource Exhaustion (AST-2011-005)
* Asterisk Manager User Shell Access (AST-2011-006)
The issues and resolutions are described in the AST-2011-005 and AST-2011-006
security advisories.
For more information about the details of these vulnerabilities, please read the
security advisories AST-2011-005 and AST-2011-006, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.3
Security advisory AST-2011-005 and AST-2011-006 are available at:
http://downloads.asterisk.org/pub/security/AST-2011-005.pdf
http://downloads.asterisk.org/pub/security/AST-2011-006.pdf
===========================================================================
1.8.3.2:
he Asterisk Development Team has announced security releases for Asterisk
branches 1.6.1, 1.6.2, and 1.8. The available security releases are
released as versions 1.6.1.24, 1.6.2.17.2, and 1.8.3.2.
** This is a re-release of Asterisk 1.6.1.23, 1.6.2.17.1 and 1.8.3.1 which
contained a bug which caused duplicate manager entries (issue #18987).
The releases of Asterisk 1.6.1.24, 1.6.2.17.2, and 1.8.3.2 resolve two issues:
* Resource exhaustion in Asterisk Manager Interface (AST-2011-003)
* Remote crash vulnerability in TCP/TLS server (AST-2011-004)
The issues and resolutions are described in the AST-2011-003 and AST-2011-004
security advisories.
For more information about the details of these vulnerabilities, please read the
security advisories AST-2011-003 and AST-2011-004, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.2
Security advisory AST-2011-003 and AST-2011-004 are available at:
http://downloads.asterisk.org/pub/security/AST-2011-003.pdf
http://downloads.asterisk.org/pub/security/AST-2011-004.pdf
===========================================================================
1.8.3.1:
The Asterisk Development Team has announced security releases for Asterisk
branches 1.6.1, 1.6.2, and 1.8. The available security releases are
released as versions 1.6.1.23, 1.6.2.17.1, and 1.8.3.1.
The releases of Asterisk 1.6.1.23, 1.6.2.17.1, and 1.8.3.1 resolve two issues:
* Resource exhaustion in Asterisk Manager Interface (AST-2011-003)
* Remote crash vulnerability in TCP/TLS server (AST-2011-004)
The issues and resolutions are described in the AST-2011-003 and AST-2011-004
security advisories.
For more information about the details of these vulnerabilities, please read the
security advisories AST-2011-003 and AST-2011-004, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.3.1
Security advisory AST-2011-003 and AST-2011-004 are available at:
http://downloads.asterisk.org/pub/security/AST-2011-003.pdf
http://downloads.asterisk.org/pub/security/AST-2011-004.pdf
===========================================================================
1.8.3:
The Asterisk Development Team has announced the release of Asterisk 1.8.3.
The release of Asterisk 1.8.3 resolves several issues reported by the community
and would have not been possible without your participation. Thank you!
The following is a sample of the issues resolved in this release:
* Resolve duplicated data in the AstDB when using DIALGROUP()
* Ensure the ipaddr field in realtime is large enough to handle IPv6 addresses.
* Reworking parsing of mwi => lines to resolve a segfault. Also add a set of
unit tests for the function that does the parsing.
* When using cdr_pgsql the billsec field was not populated correctly on
unanswered calls.
* Resolve memory leak in iCalendar and Exchange calendaring modules.
* This version of Asterisk includes the new Compiler Flags option
BETTER_BACKTRACES which uses libbfd to search for better symbol information
within both the Asterisk binary, as well as loaded modules, to assist when
using inline backtraces to track down problems.
* Resolve issue where no Music On Hold may be triggered when using
res_timing_dahdi.
* Resolve a memory leak when the Asterisk Manager Interface is disabled.
* Reimplemented fax session reservation to reverse the ABI breakage introduced
in r297486.
* Fix regression that changed behavior of queues when ringing a queue member.
* Resolve deadlock involving REFER.
Additionally, this release has the changes related to security bulletin
AST-2011-002 which can be found at
http://downloads.asterisk.org/pub/security/AST-2011-002.pdf
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.3
===========================================================================
1.8.2.4:
The Asterisk Development Team has announced security releases for Asterisk
branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are
released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4.
The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4 resolve an
issue that when decoding UDPTL packets, multiple stack and heap based arrays can
be made to overflow by specially crafted packets. Systems configured for
T.38 pass through or termination are vulnerable. The issue and resolution are
described in the AST-2011-002 security advisory.
For more information about the details of this vulnerability, please read the
security advisory AST-2011-002, which was released at the same time as this
announcement.
For a full list of changes in the current release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.2.4
Security advisory AST-2011-002 is available at:
http://downloads.asterisk.org/pub/security/AST-2011-002.pdf
2011-06-09 11:17:27 +02:00
|
|
|
DIST_SUBDIR= ${PKGNAME_NOREV}
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
DISTFILES= ${DEFAULT_DISTFILES}
|
|
|
|
|
EXTRACT_ONLY= ${DISTNAME}.tar.gz
|
|
|
|
|
CATEGORIES= comms net audio
|
|
|
|
|
MASTER_SITES= http://downloads.asterisk.org/pub/telephony/asterisk/ \
|
|
|
|
|
http://downloads.asterisk.org/pub/telephony/asterisk/old-releases/ \
|
|
|
|
|
http://downloads.asterisk.org/pub/telephony/sounds/releases/
|
|
|
|
|
|
|
|
|
|
OWNER= jnemeth@NetBSD.org
|
|
|
|
|
HOMEPAGE= http://www.asterisk.org/
|
|
|
|
|
COMMENT= The Asterisk Software PBX
|
|
|
|
|
LICENSE= gnu-gpl-v2
|
|
|
|
|
|
|
|
|
|
CONFLICTS+= asterisk-sounds-extra-[0-9]*
|
|
|
|
|
|
|
|
|
|
.include "../../mk/bsd.prefs.mk"
|
|
|
|
|
|
|
|
|
|
USE_TOOLS+= bison gmake perl:run pkg-config tar
|
|
|
|
|
USE_LANGUAGES= c c++
|
|
|
|
|
REPLACE_PERL+= agi/DialAnMp3.agi agi/agi-test.agi
|
|
|
|
|
REPLACE_PERL+= agi/fastagi-test agi/jukebox.agi agi/numeralize
|
|
|
|
|
REPLACE_PERL+= contrib/scripts/vmail.cgi
|
|
|
|
|
|
|
|
|
|
GNU_CONFIGURE= yes
|
|
|
|
|
CONFIGURE_ARGS+= --datarootdir=${PREFIX}/libdata
|
|
|
|
|
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
|
|
|
|
|
CONFIGURE_ARGS+= --without-gtk2
|
|
|
|
|
# XXX remove when lang/lua gets builtin.mk
|
|
|
|
|
CONFIGURE_ARGS+= --without-lua
|
2012-04-18 03:33:24 +02:00
|
|
|
CONFIGURE_ARGS+= --with-oss=yes
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
|
|
|
|
|
INSTALL_TARGET= install samples
|
|
|
|
|
INSTALLATION_DIRS+= lib/pkgconfig share/doc/${PKGBASE}
|
|
|
|
|
INSTALLATION_DIRS+= share/examples/asterisk share/examples/rc.d
|
|
|
|
|
INSTALLATION_DIRS+= ${ASTDATADIR}/sounds/en ${ASTDATADIR}/moh
|
|
|
|
|
|
|
|
|
|
BUILD_DEFS+= VARBASE
|
|
|
|
|
|
|
|
|
|
ASTERISK_USER?= asterisk
|
|
|
|
|
ASTERISK_GROUP?= asterisk
|
|
|
|
|
PKG_GROUPS= ${ASTERISK_GROUP}
|
|
|
|
|
PKG_USERS= ${ASTERISK_USER}:${ASTERISK_GROUP}
|
|
|
|
|
PKG_GECOS.${ASTERISK_USER}= Asterisk PBX
|
|
|
|
|
PKG_GROUPS_VARS= ASTERISK_GROUP
|
|
|
|
|
PKG_USERS_VARS= ASTERISK_USER
|
|
|
|
|
FILES_SUBST+= ASTERISK_USER=${ASTERISK_USER}
|
|
|
|
|
FILES_SUBST+= ASTERISK_GROUP=${ASTERISK_GROUP}
|
|
|
|
|
MESSAGE_SUBST+= ASTERISK_USER=${ASTERISK_USER}
|
|
|
|
|
MESSAGE_SUBST+= ASTERISK_GROUP=${ASTERISK_GROUP}
|
|
|
|
|
|
|
|
|
|
# Various path settings for Asterisk
|
|
|
|
|
PKG_SYSCONFSUBDIR= asterisk
|
|
|
|
|
PKG_SYSCONFDIR_PERMS= ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
ASTETCDIR= ${PKG_SYSCONFDIR}
|
|
|
|
|
ASTEXAMPLEDIR= ${PREFIX}/share/examples/asterisk
|
|
|
|
|
ASTDBDIR= ${VARBASE}/db/asterisk
|
|
|
|
|
ASTSPOOLDIR= ${VARBASE}/spool/asterisk
|
|
|
|
|
ASTLOGDIR= ${VARBASE}/log/asterisk
|
|
|
|
|
MESSAGE_SUBST+= ASTDBDIR=${ASTDBDIR}
|
|
|
|
|
MESSAGE_SUBST+= ASTSPOOLDIR=${ASTSPOOLDIR}
|
|
|
|
|
MESSAGE_SUBST+= ASTLOGDIR=${ASTLOGDIR}
|
|
|
|
|
ASTVARRUNDIR= ${VARBASE}/run/asterisk
|
|
|
|
|
FILES_SUBST+= ASTVARRUNDIR=${ASTVARRUNDIR}
|
|
|
|
|
ASTDATADIR= ${PREFIX}/libdata/asterisk
|
|
|
|
|
MAKE_FLAGS+= ASTLIBDIR=${PREFIX}/lib/asterisk
|
|
|
|
|
MAKE_FLAGS+= ASTVARLIBDIR=${ASTDATADIR}
|
|
|
|
|
MAKE_FLAGS+= ASTKEYDIR=${ASTDATADIR}
|
|
|
|
|
MAKE_FLAGS+= ASTDATADIR=${ASTDATADIR}
|
|
|
|
|
MAKE_FLAGS+= ASTSPOOLDIR=${ASTSPOOLDIR}
|
|
|
|
|
MAKE_FLAGS+= ASTLOGDIR=${ASTLOGDIR}
|
|
|
|
|
MAKE_FLAGS+= ASTHEADERDIR=${PREFIX}/include/asterisk
|
|
|
|
|
MAKE_FLAGS+= ASTCONFPATH=${ASTETCDIR}/asterisk.conf
|
|
|
|
|
MAKE_FLAGS+= ASTBINDIR=${PREFIX}/bin
|
|
|
|
|
MAKE_FLAGS+= ASTSBINDIR=${PREFIX}/sbin
|
|
|
|
|
MAKE_FLAGS+= ASTVARRUNDIR=${ASTVARRUNDIR}
|
|
|
|
|
MAKE_FLAGS+= ASTMANDIR=${PREFIX}/${PKGMANDIR}
|
|
|
|
|
MAKE_FLAGS+= ASTETCDIR=${ASTETCDIR}
|
|
|
|
|
MAKE_FLAGS+= ASTDBDIR=${ASTDBDIR}
|
|
|
|
|
MAKE_FLAGS+= AGI_DIR=${PREFIX}/libexec/agi-bin
|
|
|
|
|
MAKE_FLAGS+= ASTEXAMPLEDIR=${ASTEXAMPLEDIR}
|
|
|
|
|
MAKE_FLAGS+= WRKSRC=${WRKSRC}
|
|
|
|
|
MAKE_FLAGS+= LDOPTS=${LDFLAGS:M*:Q}
|
|
|
|
|
MAKE_FLAGS+= HTTP_DOCSDIR=${PREFIX}/share/httpd/htdocs
|
|
|
|
|
MAKE_FLAGS+= HTTP_CGIDIR=${PREFIX}/libexec/cgi-bin
|
2012-05-06 07:40:50 +02:00
|
|
|
MAKE_FLAGS+= OPTIMIZE=-O3
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
|
2012-02-16 17:30:03 +01:00
|
|
|
.if !empty(MACHINE_PLATFORM:MSunOS-*-i386)
|
|
|
|
|
BUILDLINK_TRANSFORM+= rm:-march=i386
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
PLIST_VARS+= kqueue
|
2012-02-27 00:12:56 +01:00
|
|
|
.if exists(/usr/include/sys/event.h)
|
2012-02-16 17:30:03 +01:00
|
|
|
PLIST.kqueue= yes
|
|
|
|
|
.endif
|
|
|
|
|
|
2012-08-19 20:41:10 +02:00
|
|
|
PLIST_VARS+= mgcp
|
|
|
|
|
# NOSIGPIPE is a temp variable, since PLIST.mgcp MUST remain undefined
|
|
|
|
|
# if the grep fails
|
|
|
|
|
NOSIGPIPE!= ${GREP} SO_NOSIGPIPE /usr/include/sys/socket.h || echo ""
|
|
|
|
|
.if ${NOSIGPIPE} != ""
|
|
|
|
|
PLIST.mgcp= yes
|
|
|
|
|
.endif
|
|
|
|
|
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
.include "options.mk"
|
|
|
|
|
|
|
|
|
|
# check sounds/Makefile for current version when upgrading package
|
|
|
|
|
DISTFILES+= asterisk-extra-sounds-en-gsm-1.4.11.tar.gz
|
|
|
|
|
|
|
|
|
|
# Override default paths in config files
|
|
|
|
|
SUBST_CLASSES+= configs
|
|
|
|
|
SUBST_STAGE.configs= pre-configure
|
|
|
|
|
SUBST_FILES.configs= configs/festival.conf.sample
|
|
|
|
|
SUBST_FILES.configs+= configs/http.conf.sample
|
|
|
|
|
SUBST_FILES.configs+= configs/musiconhold.conf.sample
|
|
|
|
|
SUBST_FILES.configs+= configs/osp.conf.sample
|
|
|
|
|
SUBST_FILES.configs+= configs/phoneprov.conf.sample
|
|
|
|
|
SUBST_FILES.configs+= configs/res_config_sqlite.conf.sample
|
|
|
|
|
SUBST_SED.configs+= -e 's|/var/lib/asterisk|${ASTVARLIBDIR}|'
|
|
|
|
|
SUBST_SED.configs+= -e "s|/usr/local/man|${ASTMANDIR}|"
|
|
|
|
|
SUBST_SED.configs+= -e "s|/usr/local|${PREFIX}|"
|
|
|
|
|
SUBST_SED.configs+= -e "s|/var|${VARBASE}|"
|
|
|
|
|
|
|
|
|
|
# XXX gross hack, remove when atomics properly implemented
|
|
|
|
|
.if (${OPSYS} == "NetBSD")
|
|
|
|
|
SUBST_CLASSES+= atomics
|
|
|
|
|
SUBST_STAGE.atomics= post-configure
|
|
|
|
|
SUBST_FILES.atomics= include/asterisk/autoconfig.h
|
|
|
|
|
SUBST_SED.atomics= -e "s|^\#define HAVE_GCC_ATOMICS 1|\#undef HAVE_GCC_ATOMICS|"
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
RCD_SCRIPTS= asterisk
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTDBDIR} ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR} ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/dictate ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/meetme ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/monitor ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
2011-07-16 23:35:11 +02:00
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/outgoing ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/system ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/tmp ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default/1234 ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default/1234/INBOX ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default/1234/en ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
SPECIAL_PERMS+= ${ASTSPOOLDIR}/voicemail/default/1234/en/busy.gsm ${ASTERISK_USER} ${ASTERISK_GROUP} 0644
|
|
|
|
|
SPECIAL_PERMS+= ${ASTSPOOLDIR}/voicemail/default/1234/en/unavail.gsm ${ASTERISK_USER} ${ASTERISK_GROUP} 0644
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default/INBOX ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTSPOOLDIR}/voicemail/default/en ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTLOGDIR} ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTLOGDIR}/cdr-csv ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
OWN_DIRS_PERMS+= ${ASTLOGDIR}/cdr-custom ${ASTERISK_USER} ${ASTERISK_GROUP} 0755
|
|
|
|
|
|
|
|
|
|
CONF_FILES_PERMS= # empty
|
|
|
|
|
.for f in asterisk.conf extensions.conf
|
|
|
|
|
CONF_FILES_PERMS+= ${ASTEXAMPLEDIR}/${f:Q} ${PKG_SYSCONFDIR}/${f:Q} ${ASTERISK_USER} ${ASTERISK_GROUP} 0644
|
|
|
|
|
.endfor
|
|
|
|
|
|
|
|
|
|
# if we put all the files in $CONF_FILES, the message is _way_ too long.
|
|
|
|
|
.for f in adsi.conf agents.conf ais.conf alarmreceiver.conf alsa.conf \
|
|
|
|
|
amd.conf app_mysql.conf asterisk.adsi calendar.conf ccss.conf \
|
|
|
|
|
cdr.conf cdr_adaptive_odbc.conf cdr_custom.conf \
|
|
|
|
|
cdr_manager.conf cdr_mysql.conf cdr_odbc.conf cdr_pgsql.conf \
|
|
|
|
|
cdr_sqlite3_custom.conf cdr_tds.conf cel.conf cel_custom.conf \
|
|
|
|
|
cel_odbc.conf cel_pgsql.conf cel_sqlite3_custom.conf \
|
|
|
|
|
cel_tds.conf chan_dahdi.conf chan_mobile.conf chan_ooh323.conf \
|
|
|
|
|
cli.conf cli_aliases.conf cli_permissions.conf codecs.conf \
|
|
|
|
|
console.conf dbsep.conf dnsmgr.conf dsp.conf dundi.conf \
|
|
|
|
|
enum.conf extconfig.conf extensions.ael extensions.conf \
|
|
|
|
|
extensions.lua extensions_minivm.conf features.conf \
|
|
|
|
|
festival.conf followme.conf func_odbc.conf gtalk.conf h323.conf \
|
|
|
|
|
http.conf iax.conf iaxprov.conf indications.conf jabber.conf \
|
|
|
|
|
jingle.conf logger.conf manager.conf meetme.conf mgcp.conf \
|
|
|
|
|
minivm.conf misdn.conf modules.conf musiconhold.conf muted.conf \
|
|
|
|
|
osp.conf oss.conf phone.conf phoneprov.conf queuerules.conf \
|
|
|
|
|
queues.conf res_config_mysql.conf res_config_sqlite.conf \
|
|
|
|
|
res_curl.conf res_fax.conf res_ldap.conf res_odbc.conf \
|
|
|
|
|
res_pgsql.conf res_pktccops.conf res_snmp.conf \
|
2012-06-05 02:15:34 +02:00
|
|
|
res_stun_monitor.conf rtp.conf say.conf sip.conf udptl.conf \
|
|
|
|
|
unistim.conf users.conf voicemail.conf vpb.conf
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
CONF_FILES_PERMS+= ${ASTEXAMPLEDIR}/${f:Q} ${PKG_SYSCONFDIR}/${f:Q} ${ASTERISK_USER} ${ASTERISK_GROUP} 0644
|
|
|
|
|
.endfor
|
|
|
|
|
|
|
|
|
|
PTHREAD_OPTS+= require native
|
|
|
|
|
|
|
|
|
|
.if (${OPSYS} == "Darwin" && exists(/usr/include/sys/poll.h))
|
|
|
|
|
post-patch:
|
|
|
|
|
${ECHO} "#include <sys/poll.h>" > ${WRKSRC}/include/asterisk/poll-compat.h
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
post-install:
|
|
|
|
|
# check sounds directory for current versions when upgrading package
|
Update to 1.8.10.1: this fixes AST-2012-002 and AST-2012-003.
pkgsrc changes: adapt to having iLBC coded included in the asterisk
tarball and newer version of sounds tarball.
----- 1.8.10.0 -----
The Asterisk Development Team has announced the release of Asterisk 1.8.10.0.
The release of Asterisk 1.8.10.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Prevent outbound SIP NOTIFY packets from displaying a port of 0 ---
* --- Include iLBC source code for distribution with Asterisk ---
* --- Fix callerid of originated calls ---
* --- Fix outbound DTMF for inband mode of chan_ooh323 ---
* --- Create and initialize udptl only when dialog requests image media ---
* --- Don't prematurely stop SIP session timer ---
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.10.0
Thank you for your continued support of Asterisk!
----- 1.8.10.1 -----
The Asterisk Development Team has announced security releases for
Asterisk 1.4, 1.6.2, 1.8, and 10. The available security releases
are released as versions 1.4.44, 1.6.2.23, 1.8.10.1, and 10.2.1.
The release of Asterisk 1.8.10.1 and 10.2.1 resolve two issues.
First, they resolve the issue in app_milliwatt, wherein a buffer
can potentially be overrun on the stack, but no remote code execution
is possible. Second, they resolve an issue in HTTP AMI where digest
authentication information can be used to overrun a buffer on the
stack, allowing for code injection and execution.
These issues and their resolution are described in the security
advisory.
For more information about the details of these vulnerabilities,
please read the security advisories AST-2012-002 and AST-2012-003,
which were released at the same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.10.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-002.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-003.pdf
Thank you for your continued support of Asterisk!
2012-03-22 04:43:42 +01:00
|
|
|
${TAR} xzf ${WRKSRC}/sounds/asterisk-core-sounds-en-gsm-1.4.22.tar.gz -C ${DESTDIR}${ASTDATADIR}/sounds/en
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
${TAR} xzf ${WRKSRC}/sounds/asterisk-moh-opsound-wav-2.03.tar.gz -C ${DESTDIR}${ASTDATADIR}/moh
|
|
|
|
|
${TAR} xzf ${DISTDIR}/${DIST_SUBDIR}/asterisk-extra-sounds-en-gsm-1.4.11.tar.gz -C ${DESTDIR}${ASTDATADIR}/sounds/en
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/BUGS ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/CHANGES ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/COPYING ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/CREDITS ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/ChangeLog ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/LICENSE ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/README ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/README-SERIOUSLY.bestpractices.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/UPGRADE-1.2.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/UPGRADE-1.4.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/UPGRADE-1.6.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/UPGRADE.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/Zaptel-to-DAHDI.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
Update to 1.8.7.0 (mainly bug fixes).
pkgsrc changes:
- adjust for ilbc changes after it was acquired by Google
- install AST.pdf IAX2-security.pdf into share/doc/asterisk
1.8.7.0:
========
The release of Asterisk 1.8.7.0 resolves several issues reported
by the community and would have not been possible without your
participation. Thank you!
Please note that a significant numbers of changes and fixes have
gone into features.c in this release (call parking, built-in
transfers, call pickup, etc.).
NOTE:
Recently, we were notified that the mechanism included in our
Asterisk source code releases to download and build support for
the iLBC codec had stopped working correctly; a little investigation
revealed that this occurred because of some changes on the
ilbcfreeware.org website. These changes occurred as a result of
Google's acquisition of GIPS, who produced (and provided licenses
for) the iLBC codec.
If you are a user of Asterisk and iLBC together, and you've already
executed a license agreement with GIPS, we believe you can continue
using iLBC with Asterisk. If you are a user of Asterisk and iLBC
together, but you had not executed a license agreement with GIPS,
we encourage you to research the situation and consult with your
own legal representatives to determine what actions you may want
to take (or avoid taking).
More information is available on the Asterisk blog:
http://blogs.asterisk.org/2011/09/19/ilbc-support-in-asterisk-after-googles-acquisition-of-gips/
The following is a sample of the issues resolved in this release:
* Added the 'storesipcause' option to sip.conf to allow the user to
disable the setting of HASH(SIP_CAUSE,) on the channel. Having
chan_sip set HASH(SIP_CAUSE,) on the channel carries a significant
performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
We've decided to disable this feature by default in future 1.8
versions. This would be an unexpected behavior change for anyone
depending on that SIP_CAUSE update in their dialplan. Please
refer to the asterisk-dev mailing list more information:
http://lists.digium.com/pipermail/asterisk-dev/2011-August/050626.html
* Significant fixes and improvements to parking lots.
(Closes issues ASTERISK-17183, ASTERISK-17870, ASTERISK-17430,
ASTERISK-17452, ASTERISK-17452, ASTERISK-15792.)
* Numerous issues have been reported for deadlocks that are caused
by a blocking read in res_timing_timerfd on a file descriptor
that will never be written to.
A change to Asterisk adds some checks to make sure that the
timerfd is both valid and armed before calling read(). Should
fix: ASTERISK-18142, ASTERISK-18197, ASTERISK-18166 and possibly
others. (In essence, this change should make res_timing_timerfd
usable.)
* Resolve segfault when publishing device states via XMPP and not connected.
(Closes issue ASTERISK-18078.)
* Refresh peer address if DNS unavailable at peer creation.
(Closes issue ASTERISK-18000)
* Fix the missing DAHDI channels when using the newer chan_dahdi.conf
sections for channel configuration.
(Closes issue ASTERISK-18496.)
* Remove unnecessary libpri dependency checks in the configure script.
(Closes issue ASTERISK-18535.)
* Update get_ilbc_source.sh script to work again.
(Closes issue ASTERISK-18412)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.7.0
Thank you for your continued support of Asterisk!
1.8.6.0:
========
The release of Asterisk 1.8.6.0 resolves several issues reported
by the community and would have not been possible without your
participation. Thank you!
The following is a sample of the issues resolved in this release:
* Fix an issue with Music on Hold classes losing files in playlist
when realtime is used. (Closes issue ASTERISK-17875.)
* Resolve a potential crash in chan_sip when utilizing auth= and
performing a 'sip reload' from the console. (Closes issue
ASTERISK-17939.)
* Address some improper sql statements in res_odbc that would cause
an update to fail on realtime peers due to trying to set as
"(NULL)" rather than an actual NULL. (Closes issue ASTERISK-17791.)
* Resolve issue where 403 Forbidden would always be sent maximum
number of times regardless to receipt of ACK.
* Resolve issue where if a call to MeetMe includes both the dynamic(D)
and always request PIN(P) options, MeetMe will ask for the PIN
two times: once for creating the conference and once for entering
the conference.
* Fix New Zealand indications profile based on
http://www.telepermit.co.nz/TNA102.pdf
(Closes issue ASTERISK-16263.)
* Segfault in shell_helper in func_shell.c
(Closes issue ASTERISK-18109.)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.6.0
Thank you for your continued support of Asterisk!
2011-10-11 05:12:55 +02:00
|
|
|
${INSTALL_DATA} ${WRKSRC}/doc/IAX2-security.pdf ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
${INSTALL_DATA} ${WRKSRC}/doc/IAX2-security.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/doc/README.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/doc/api-1.6.2-changes.txt ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}
|
Update to Asterisk 1.8.8.1.
share/doc/asterisk/AST.{txt,pdf} has been replaced with
share/doc/asterisk/Asterisk_Admin_Guide. You will need a browser
to read the latter.
----- Asterisk 1.8.8.1 -----
The release of Asterisk 1.8.8.1 resolves a regression introduced
in Asterisk 1.8.8.0 reported by the community, and would have not
been possible without your participation. Thank you!
The following is the issue resolved in this release:
* Handle AST_CONTROL_UPDATE_RTP_PEER frames in local bridge loop
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local
bridge loop causes the loop to exit prematurely. This causes a
variety of negative side effects, which may include having Music
On Hold failing during a SIP Hold.
For a full description of the changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.8.1
Thank you for your continued support of Asterisk!
----- Asterisk 1.8.8.0 -----
The release of Asterisk 1.8.8.0 resolves several issues reported
by the community and would have not been possible without your
participation. Thank you!
The following is a sample of the issues resolved in this release:
* Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484
Address Incomplete response, if overlapped dialing is enabled
for SIP, then the 484 Address Incomplete is forwarded back to
the SIP phone and the HANGUPCAUSE channel variable is set to
28. Previously, the Incomplete application dialplan logic was
automatically triggered; now, explicit dialplan usage of the
application is required.
* Prevent IAX2 from getting IPv6 addresses via DNS
IAX2 does not support IPv6 and getting such addresses from DNS
can cause error messages on the remote end involving bad IPv4
address casts in the presence of IPv6/IPv4 tunnels.
* Fix bad RTP media bridges in directmedia calls on peers separated by
multiple Asterisk nodes.
* Fix crashes in ast_rtcp_write()
* Fix for incorrect voicemail duration in external notifications.
This patch fixes an issue where the voicemail duration was being
reported with a duration significantly less than the actual
sound file duration.
* Prevent segfault if call arrives before Asterisk is fully booted.
* Fix remote Crash Vulnerability in SIP channel driver (AST-2011-012)
http://downloads.asterisk.org/pub/security/AST-2011-012.pdf
* Fix locking order in app_queue.c which caused deadlocks
* Fix regression in configure script for libpri capability checks
* Prevent BLF subscriptions from causing deadlocks.
* Fix deadlock if peer is destroyed while sending MWI notice.
* Fix issue with setting defaultenabled on categories that are already
enabled by default.
* Don't crash on INFO automon request with no channel
AST-2011-014. When automon was enabled in features.conf, it
was possible to crash Asterisk by sending an INFO request if
no channel had been created yet.
* Fixed crash from orphaned MWI subscriptions in chan_sip
This patch resolves the issue where MWI subscriptions are orphaned
by subsequent SIP SUBSCRIBE messages.
* Default to nat=yes; warn when nat in general and peer differ
AST-2011-013. It is possible to enumerate SIP usernames when
the general and user/peer nat settings differ in whether to
respond to the port a request is sent from or the port listed
for responses in the Via header.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.8.0
Thank you for your continued support of Asterisk!
2012-01-15 04:32:47 +01:00
|
|
|
cp -r ${WRKSRC}/doc/Asterisk-Admin-Guide ${DESTDIR}${PREFIX}/share/doc/${PKGBASE}/Asterisk-Admin-Guide
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
|
2011-10-18 01:40:50 +02:00
|
|
|
.include "../../databases/sqlite3/buildlink3.mk"
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
.include "../../devel/zlib/buildlink3.mk"
|
|
|
|
|
.include "../../security/openssl/buildlink3.mk"
|
|
|
|
|
.include "../../textproc/libxml2/buildlink3.mk"
|
|
|
|
|
.include "../../www/curl/buildlink3.mk"
|
2012-04-18 03:33:24 +02:00
|
|
|
.include "../../mk/oss.buildlink3.mk"
|
Import Asterisk 1.8.1:
Asterisk is a complete PBX in software. It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.
Asterisk 1.8 is a long term support version (i.e. it will be
supported for four years with an additional year of security only
fixes). See:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions
What's new:
Asterisk 1.8 is the next major release series of Asterisk.
The release of Asterisk 1.8.0 would not have been possible without the support
and contributions of the community. Since Asterisk 1.6.2, we've had over 500
reporters, more than 300 testers and greater than 200 developers contributed to
this release.
You can find a summary of the work involved with the 1.8.0 release in the
sumary:
http://svn.asterisk.org/svn/asterisk/tags/1.8.0/asterisk-1.8.0-summary.txt
A short list of available features includes:
* Secure RTP
* IPv6 Support in the SIP channel driver
* Connected Party Identification Support
* Calendaring Integration
* A new call logging system, Channel Event Logging (CEL)
* Distributed Device State using Jabber/XMPP PubSub
* Call Completion Supplementary Services support
* Advice of Charge support
* Much, much more!
A full list of new features can be found in the CHANGES file.
http://svn.digium.com/view/asterisk/branches/1.8/CHANGES?view=markup
For a full list of changes in the current release candidate, please see the
ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.0
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.1.
The release of Asterisk 1.8.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* Fix issue when using directmedia. Asterisk needs to limit the codecs offered
to just the ones that both sides recognize, otherwise they may end up sending
audio that the other side doesn't understand.
(Closes issue #17403. Reported, patched by one47. Tested by one47, falves11)
* Resolve issue where Party A in an analog 3-way call would continue to hear
ringback after party C answers.
(Patched by rmudgett)
* Fix playback failure when using IAX with the timerfd module.
(Closes issue #18110. Reported, tested by tpanton. Patched by jpeeler)
* Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time.
(Closes issue #16382. Reported by lftsy. Tested by zerohalo. Patched by
jpeeler)
* Fix issue where it is possible to crash Asterisk by feeding the curl engine
invalid data.
(Closes issue #18161. Reported by wdoekes. Patched by tilghman)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.1
2010-12-15 04:22:43 +01:00
|
|
|
.include "../../mk/curses.buildlink3.mk"
|
|
|
|
|
.include "../../mk/pthread.buildlink3.mk"
|
|
|
|
|
.include "../../mk/bsd.pkg.mk"
|
