Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
$NetBSD: patch-aa,v 1.4 2008/02/15 16:23:09 gdt Exp $
|
1999-09-06 20:11:22 +02:00
|
|
|
|
Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
--- configure.orig 2008-02-08 16:34:38.000000000 -0500
|
|
|
|
|
+++ configure
|
|
|
|
|
@@ -13538,7 +13538,10 @@ echo $ECHO_N "checking SSH options... $E
|
|
|
|
|
# now convert that to a comma-separated list of C strings
|
|
|
|
|
eval "set dummy ${SSH_OPTIONS}"; shift
|
|
|
|
|
SSH_OPTIONS=''
|
|
|
|
|
- for i in "${@}"; do SSH_OPTIONS="${SSH_OPTIONS}${SSH_OPTIONS:+, }\"${i/\"/\\\"}\""; done
|
|
|
|
|
+ for i in "${@}"; do
|
|
|
|
|
+ quoted="\"`echo "$i" | sed -e 's/\"/\\\"/'`\""
|
|
|
|
|
+ SSH_OPTIONS="${SSH_OPTIONS}${SSH_OPTIONS:+, }$quoted";
|
|
|
|
|
+ done
|
|
|
|
|
echo "$as_me:$LINENO: result: $SSH_OPTIONS" >&5
|
|
|
|
|
echo "${ECHO_T}$SSH_OPTIONS" >&6
|
|
|
|
|
|
|
|
|
|
@@ -38647,8 +38650,10 @@ fi
|
2001-01-16 22:59:29 +01:00
|
|
|
# This can be used to rebuild libtool when needed
|
2004-05-15 14:15:22 +02:00
|
|
|
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
|
1999-09-06 20:11:22 +02:00
|
|
|
|
2001-01-16 22:59:29 +01:00
|
|
|
+if false ; then
|
1999-09-06 20:11:22 +02:00
|
|
|
# Always use our own libtool.
|
|
|
|
|
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
|
|
|
|
|
+fi
|
|
|
|
|
|
2004-05-15 14:15:22 +02:00
|
|
|
# Prevent multiple expansion
|
|
|
|
|
|
Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
@@ -62491,7 +62496,7 @@ fi;
|
|
|
|
|
# Check whether --with-xsltproc-flags or --without-xsltproc-flags was given.
|
|
|
|
|
if test "${with_xsltproc_flags+set}" = set; then
|
|
|
|
|
withval="$with_xsltproc_flags"
|
|
|
|
|
- if test "x$withval" == "xno"; then
|
|
|
|
|
+ if test "x$withval" = "xno"; then
|
|
|
|
|
XSLTPROC_FLAGS=''
|
|
|
|
|
else
|
|
|
|
|
if test "x$withval" != "xyes"; then
|
