AST-2013-004 and AST-2013-005.
The Asterisk Development Team has announced security releases for
Certified Asterisk 1.8.15, 11.2, and Asterisk 1.8, 10, and 11. The
available security rele ases are released as versions 1.8.15-cert2,
11.2-cert2, 1.8.23.1, 10.12.3, 10.12.3-di giumphones, and 11.5.1.
The release of these versions resolve the following issues:
* A remotely exploitable crash vulnerability exists in the SIP
channel driver if an ACK with SDP is received after the channel
has been terminated. The handling code incorrectly assumes that
the channel will always be present.
* A remotely exploitable crash vulnerability exists in the SIP
channel driver if an invalid SDP is sent in a SIP request that
defines media descriptions before connection information. The
handling code incorrectly attempts to reference the socket address
information even though that information has not yet been set.
These issues and their resolutions are described in the security advisories.
For more information about the details of these vulnerabilities,
please read security advisories AST-2013-004 and AST-2013-005,
which were released at the same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.23.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2013-004.pdf
* http://downloads.asterisk.org/pub/security/AST-2013-005.pdf
Thank you for your continued support of Asterisk!
pkgsrc changes:
- add work around for NetBSD's incompatible implementation of IP_PKTINFO
- core sounds package was updated to 1.4.24
The Asterisk Development Team has announced the release of Asterisk 1.8.23.0.
The release of Asterisk 1.8.23.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Fix a memory copying bug in slinfactory which was causing
mixmonitor issues.
* --- IAX2: fix race condition with nativebridge transfers.
* --- Fix crash in chan_sip when a core initiated op occurs at the
same time as a BYE
* --- Fix The Payload Being Set On CN Packets And Do Not Set Marker
Bit
* --- chan_sip: Session-Expires: Set timer to correctly expire at
(~2/3) of the interval when not the refresher
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.23.0
Thank you for your continued support of Asterisk!
to address issues with NetBSD-6(and earlier)'s fontconfig not being
new enough for pango.
While doing that, also bump freetype2 dependency to current pkgsrc
version.
Suggested by tron in PR 47882
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
The Asterisk Development Team has announced the release of Asterisk 1.8.22.0.
The release of Asterisk 1.8.22.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Fix Sorting Order For Parking Lots Stored In Static Realtime
* --- Make ParkAndAnnounce return to priority + 1 when return context
is not defined
* --- When a session timer expires during a T.38 call, re-invite with
correct SDP
* --- Fix several unreleased mutex locks that cause problem with
processing calls
* --- Fix crash when AMI redirect action redirects two channels out of
a bridge.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.22.0
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced the release of Asterisk 1.8.21.0.
The release of Asterisk 1.8.21.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Fix issue where chan_mobile fails to bind to first available port
* --- Fix station ringback; trunk hangup issues in SLA
* --- Fix Queue Log Reporting Every Call COMPLETECALLER With "h"
Extension Present
* --- Fix Record-Route parsing for large headers.
* --- Fix AMI redirect action with two channels failing to redirect
both channels.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.21.0
Thank you for your continued support of Asterisk!
AST-2013-001, AST-2013-002, and AST-2013-003.
The Asterisk Development Team has announced security releases for Certified
Asterisk 1.8.15 and Asterisk 1.8, 10, and 11. The available security releases
are released as versions 1.8.15-cert2, 1.8.20.2, 10.12.2, 10.12.2-digiumphones,
and 11.2.2.
The release of these versions resolve the following issues:
* A denial of service exists in Asterisk's HTTP server. AST-2012-014, fixed
in January of this year, contained a fix for Asterisk's HTTP server for a
remotely-triggered crash. While the fix prevented the crash from being
triggered, a denial of service vector still exists with that solution if an
attacker sends one or more HTTP POST requests with very large Content-Length
values.
This vulnerability affects Certified Asterisk 1.8.15, Asterisk 1.8, 10, and 11
* A potential username disclosure exists in the SIP channel driver. When
authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways.
This vulnerability affects Certified Asterisk 1.8.15, Asterisk 1.8, 10, and 11
These issues and their resolutions are described in the security advisories.
For more information about the details of these vulnerabilities, please read
security advisories AST-2013-001, AST-2013-002, and AST-2013-003, which were
released at the same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.20.2
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2013-001.pdf
* http://downloads.asterisk.org/pub/security/AST-2013-002.pdf
* http://downloads.asterisk.org/pub/security/AST-2013-003.pdf
Thank you for your continued support of Asterisk!
----- 1.8.20.1
The Asterisk Development Team has announced the release of Asterisk 1.8.20.1.
The release of Asterisk 1.8.20.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following are the issues resolved in this release:
* --- Fix astcanary startup problem due to wrong pid value from before
daemon call
* --- Update init.d scripts to handle stderr; readd splash screen for
remote consoles
* --- Reset RTP timestamp; sequence number on SSRC change
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.20.1
Thank you for your continued support of Asterisk!
----- 1.8.20.0
The Asterisk Development Team has announced the release of Asterisk 1.8.20.0.
The release of Asterisk 1.8.20.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- app_meetme: Fix channels lingering when hung up under certain
conditions
* --- Fix stuck DTMF when bridge is broken.
* --- Improve Code Readability And Fix Setting natdetected Flag
* --- Fix extension matching with the '-' char.
* --- Fix call files when astspooldir is relative.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.20.0
Thank you for your continued support of Asterisk!
and AST-2012-015.
Approved for commit during freeze by: agc
The Asterisk Development Team has announced security releases for Certified
Asterisk 1.8.11 and Asterisk 1.8, 10, and 11. The available security releases
are released as versions 1.8.11-cert10, 1.8.19.1, 10.11.1, 10.11.1-digiumphones,
and 11.1.1.
The release of these versions resolve the following two issues:
* Stack overflows that occur in some portions of Asterisk that manage a TCP
connection. In SIP, this is exploitable via a remote unauthenticated session;
in XMPP and HTTP connections, this is exploitable via remote authenticated
sessions.
* A denial of service vulnerability through exploitation of the device state
cache. Anonymous calls had the capability to create devices in Asterisk that
would never be disposed of.
These issues and their resolutions are described in the security advisories.
For more information about the details of these vulnerabilities, please read
security advisories AST-2012-014 and AST-2012-015, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-11.1.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-014.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-015.pdf
Thank you for your continued support of Asterisk!
----- 1.8.19.0:
The Asterisk Development Team has announced the release of Asterisk 1.8.19.0.
The release of Asterisk 1.8.19.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Prevent resetting of NATted realtime peer address on reload.
* --- Do not use a FILE handle when doing SIP TCP reads.
* --- Fix execution of 'i' extension due to uninitialized variable.
* --- Ensure that the Queue application tracks busy members in off
nominal situations
* --- Properly extract the Body information of an EWS calendar item
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.19.0
Thank you for your continued support of Asterisk!
----- 1.8.18.1:
The Asterisk Development Team has announced the release of Asterisk 1.8.18.1.
The release of Asterisk 1.8.18.1 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!
The following is the issue resolved in this release:
* --- chan_local: Fix local_pvt ref leak in local_devicestate().
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.18.1
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced the release of Asterisk 1.8.18.0.
The release of Asterisk 1.8.18.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- dsp.c User Configurable DTMF_HITS_TO_BEGIN and
DTMF_MISSES_TO_END
* --- Fix error where improper IMAP greetings would be deleted.
* --- iax2-provision: Fix improper return on failed cache retrieval
* --- Fix T.38 support when used with chan_local in between.
* --- Fix an issue where media would not flow for situations where the
legacy STUN code is in use.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.18.0
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced the release of Asterisk 1.8.17.0.
The release of Asterisk 1.8.17.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Fix channel reference leak in ChanSpy.
* --- dsp.c: Fix multiple issues when no-interdigit delay is present,
and fast DTMF 50ms/50ms
* --- Fix bug where final queue member would not be removed from
memory.
* --- Fix memory leak when CEL is successfully written to PostgreSQL
database
* --- Fix DUNDi message routing bug when neighboring peer is
unreachable
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.17.0
Thank you for your continued support of Asterisk!
AST-2012-013, and some general bugs.
The Asterisk Development Team has announced the release of Asterisk 1.8.16.0.
The release of Asterisk 1.8.16.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- AST-2012-012: Resolve AMI User Unauthorized Shell Access through
ExternalIVR
* --- AST-2012-013: Resolve ACL rules being ignored during calls by
some IAX2 peers
* --- Handle extremely out of order RFC 2833 DTMF
* --- Resolve severe memory leak in CEL logging modules.
* --- Only re-create an SRTP session when needed; respond with correct
crypto policy
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.16.0
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced security releases for Certified
Asterisk 1.8.11 and Asterisk 1.8 and 10. The available security releases are
released as versions 1.8.11-cert7, 1.8.15.1, 10.7.1, and 10.7.1-digiumphones.
The release of Asterisk 1.8.11-cert7, 1.8.15.1, 10.7.1, and 10.7.1-digiumphones
resolve the following two issues:
* A permission escalation vulnerability in Asterisk Manager Interface. This
would potentially allow remote authenticated users the ability to execute
commands on the system shell with the privileges of the user running the
Asterisk application. Please note that the README-SERIOUSLY.bestpractices.txt
file delivered with Asterisk has been updated due to this and other related
vulnerabilities fixed in previous versions of Asterisk.
* When an IAX2 call is made using the credentials of a peer defined in a
dynamic Asterisk Realtime Architecture (ARA) backend, the ACL rules for that
peer are not applied to the call attempt. This allows for a remote attacker
who is aware of a peer's credentials to bypass the ACL rules set for that
peer.
These issues and their resolutions are described in the security advisories.
For more information about the details of these vulnerabilities, please read
security advisories AST-2012-012 and AST-2012-013, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.15.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-012.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-013.pdf
Thank you for your continued support of Asterisk!
The release of Asterisk 1.8.15.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Fix deadlock potential with ast_set_hangupsource() calls.
* --- Fix request routing issue when outboundproxy is used.
* --- Make the address family filter specific to the transport.
* --- Fix NULL pointer segfault in ast_sockaddr_parse()
* --- Do not perform install on existing directories
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.15.0
Thank you for your continued support of Asterisk!
- this package is marked OWNER= for a reason!
- need to figure out why chan_mgcp is built only in some situations
instead of adding gross hacks
- upgrade to Asterisk 1.8.14.1: this is a bugfix release
The release of Asterisk 1.8.14.1 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!
The following is the issue resolved in this release:
* --- Remove a superfluous and dangerous freeing of an SSL_CTX.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.14.1
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced the release of Asterisk 1.8.14.0.
The release of Asterisk 1.8.14.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- format_mp3: Fix a possible crash in mp3_read().
* --- Fix local channel chains optimizing themselves out of a call.
* --- Update a peer's LastMsgsSent when the peer is notified of
waiting messages
* --- Prevent sip_pvt refleak when an ast_channel outlasts its
corresponding sip_pvt.
* --- Send more accurate identification information in dialog-info SIP
NOTIFYs.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.14.0
Thank you for your continued support of Asterisk!
AST-2012-010 and AST-2012-011
The Asterisk Development Team has announced security releases for Certified
Asterisk 1.8.11 and Asterisk 1.8 and 10. The available security releases are
released as versions 1.8.11-cert4, 1.8.13.1, 10.5.2, and 10.5.2-digiumphones.
The release of Asterisk 1.8.11-cert4, 1.8.13.1, 10.5.2, and 10.5.2-digiumphones
resolve the following two issues:
* If Asterisk sends a re-invite and an endpoint responds to the re-invite with
a provisional response but never sends a final response, then the SIP dialog
structure is never freed and the RTP ports for the call are never released. If
an attacker has the ability to place a call, they could create a denial of
service by using all available RTP ports.
* If a single voicemail account is manipulated by two parties simultaneously,
a condition can occur where memory is freed twice causing a crash.
These issues and their resolution are described in the security advisories.
For more information about the details of these vulnerabilities, please read
security advisories AST-2012-010 and AST-2012-011, which were released at the
same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.13.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-010.pdf
* http://downloads.asterisk.org/pub/security/pST-2012-011.pdf
Thank you for your continued support of Asterisk!
The Asterisk Development Team has announced the release of Asterisk
1.8.13.0.
The release of Asterisk 1.8.13.0 resolves several issues reported
by the community and would have not been possible without your
participation. Thank you!
The following is a sample of the issues resolved in this release:
* --- Turn off warning message when bind address is set to any.
* --- Prevent overflow in calculation in ast_tvdiff_ms on 32-bit
machines
* --- Make DAHDISendCallreroutingFacility wait 5 seconds for a reply
before disconnecting the call.
* --- Fix recalled party B feature flags for a failed DTMF atxfer.
* --- Fix DTMF atxfer running h exten after the wrong bridge ends.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.13.0
Thank you for your continued support of Asterisk!
and AST-2012-008 along with some general bug fixes.
----- 1.8.12.1 -----
The Asterisk Development Team has announced security releases for
Certified Asterisk 1.8.11 and Asterisk 1.8 and 10. The available
security releases are released as versions 1.8.11-cert2, 1.8.12.1,
and 10.4.1.
The release of Asterisk 1.8.11-cert2, 1.8.12.1, and 10.4.1 resolve
the following two issues:
* A remotely exploitable crash vulnerability exists in the IAX2
channel driver if an established call is placed on hold without
a suggested music class. Asterisk will attempt to use an invalid
pointer to the music on hold class name, potentially causing a
crash.
* A remotely exploitable crash vulnerability was found in the Skinny
(SCCP) Channel driver. When an SCCP client closes its connection
to the server, a pointer in a structure is set to NULL. If the
client was not in the on-hook state at the time the connection
was closed, this pointer is later dereferenced. This allows remote
authenticated connections the ability to cause a crash in the
server, denying services to legitimate users.
These issues and their resolution are described in the security
advisories.
For more information about the details of these vulnerabilities,
please read security advisories AST-2012-007 and AST-2012-008,
which were released at the same time as this announcement.
For a full list of changes in the current releases, please see the
ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.12.1http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-10.4.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-007.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-008.pdf
Thank you for your continued support of Asterisk!
----- 1.8.12.2 -----
The Asterisk Development Team has announced the release of Asterisk
1.8.12.2.
The release of Asterisk 1.8.12.2 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!
The following is the issue resolved in this release:
* --- Resolve crash in subscribing for MWI notifications
(Closes issue ASTERISK-19827. Reported by B. R)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.12.2
Thank you for your continued support of Asterisk!
pkgsrc changes:
- set OPTIMIZE to -O3 as levels above are poorly defined and can
cause problems
- maintain current patch namimg convention
-----
The Asterisk Development Team has announced the release of Asterisk 1.8.12.0.
The release of Asterisk 1.8.12.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following are the issues resolved in this release:
* --- Prevent chanspy from binding to zombie channels
* --- Fix Dial m and r options and forked calls generating warnings
for voice frames.
* --- Remove ISDN hold restriction for non-bridged calls.
* --- Fix copying of CDR(accountcode) to local channels.
* --- Ensure Asterisk acknowledges ACKs to 4xx on Replaces errors
* --- Eliminate double close of file descriptor in manager.c
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.12.0
Thank you for your continued support of Asterisk!
and AST-2012-006.
The Asterisk Development Team has announced security releases for
Asterisk 1.6.2 , 1.8, and 10. The available security releases are
released as versions 1.6.2.24, 1.8.11.1, and 10.3.1.
The release of Asterisk 1.6.2.24, 1.8.11.1, and 10.3.1 resolve the
following two issues:
* A permission escalation vulnerability in Asterisk Manager
Interface. This would potentially allow remote authenticated
users the ability to execute commands on the system shell with
the privileges of the user running the Asterisk application.
* A heap overflow vulnerability in the Skinny Channel driver.
The keypad button message event failed to check the length of
a fixed length buffer before appending a received digit to the
end of that buffer. A remote authenticated user could send
sufficient keypad button message events that th e buffer would
be overrun.
In addition, the release of Asterisk 1.8.11.1 and 10.3.1 resolve
the following issue:
* A remote crash vulnerability in the SIP channel driver when
processing UPDATE requests. If a SIP UPDATE request was received
indicating a connected line update after a channel was terminated
but before the final destruction of the associated SIP dialog,
Asterisk would attempt a connected line update on a non-existing
channel, causing a crash.
These issues and their resolution are described in the security
advisories.
For more information about the details of these vulnerabilities,
please read security advisories AST-2012-004, AST-2012-005, and
AST-2012-006, which were released at the same time as this
announcement.
For a full list of changes in the current releases, please see the
ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.6.2.24http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.11.1http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-10.3.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-004.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-005.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-006.pdf
Thank you for your continued support of Asterisk!
pkgsrc change: eliminate ilbc option now that the iLBC codec is always built
The Asterisk Development Team has announced the release of Asterisk 1.8.11.0.
The release of Asterisk 1.8.11.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following are the issues resolved in this release:
* --- Fix potential buffer overrun and memory leak when executing "sip
show peers"
* --- Fix ACK routing for non-2xx responses.
* --- Remove possible segfaults from res_odbc by adding locks around
usage of odbc handle
* --- Fix blind transfer parking issues if the dialed extension is not
recognized as a parking extension.
* --- Copy CDR variables when set during a bridge
* --- push 'outgoing' flag from sig_XXX up to chan_dahdi
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.11.0
Thank you for your continued support of Asterisk!
pkgsrc changes: adapt to having iLBC coded included in the asterisk
tarball and newer version of sounds tarball.
----- 1.8.10.0 -----
The Asterisk Development Team has announced the release of Asterisk 1.8.10.0.
The release of Asterisk 1.8.10.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following is a sample of the issues resolved in this release:
* --- Prevent outbound SIP NOTIFY packets from displaying a port of 0 ---
* --- Include iLBC source code for distribution with Asterisk ---
* --- Fix callerid of originated calls ---
* --- Fix outbound DTMF for inband mode of chan_ooh323 ---
* --- Create and initialize udptl only when dialog requests image media ---
* --- Don't prematurely stop SIP session timer ---
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.10.0
Thank you for your continued support of Asterisk!
----- 1.8.10.1 -----
The Asterisk Development Team has announced security releases for
Asterisk 1.4, 1.6.2, 1.8, and 10. The available security releases
are released as versions 1.4.44, 1.6.2.23, 1.8.10.1, and 10.2.1.
The release of Asterisk 1.8.10.1 and 10.2.1 resolve two issues.
First, they resolve the issue in app_milliwatt, wherein a buffer
can potentially be overrun on the stack, but no remote code execution
is possible. Second, they resolve an issue in HTTP AMI where digest
authentication information can be used to overrun a buffer on the
stack, allowing for code injection and execution.
These issues and their resolution are described in the security
advisory.
For more information about the details of these vulnerabilities,
please read the security advisories AST-2012-002 and AST-2012-003,
which were released at the same time as this announcement.
For a full list of changes in the current releases, please see the ChangeLogs:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-1.8.10.1
The security advisories are available at:
* http://downloads.asterisk.org/pub/security/AST-2012-002.pdf
* http://downloads.asterisk.org/pub/security/AST-2012-003.pdf
Thank you for your continued support of Asterisk!
pkgsrc changes:
- maintain patch naming convention
- detect kqueue properly
The Asterisk Development Team has announced the release of Asterisk 1.8.9.3.
The release of Asterisk 1.8.9.3 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following are the issues resolved in this release:
* --- Fix ACK routing for non-2xx responses.
(Closes issue ASTERISK-19389. Reported by: Karsten Wemheuer)
* --- Fix regressions with regards to route-set creation on early dialogs ---
(Closes issue ASTERISK-19358. Reported-by: Karsten Wemheuer)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.8.9.3
Thank you for your continued support of Asterisk!
