are only a handful of changes in this dot release, and with the pending
release of 1.13 next month, it's likely that this may be the final scheduled
release from the 1.12 branch; we will likely put out additional releases
from this branch, but they will no longer follow the standard 6-week
development cycle.
This version is identical to the previous release candidate except for
version numbers.
== Known Issues ==
Currently open bugs the 1.12 Tracker:
https://bugs.freedesktop.org/show_bug.cgi?id=xserver-1.12
23938: keys occasionally get stuck with xorg-server 1.6.99.901
http://bugs.freedesktop.org/23938
31501: crash accessing font info with xfs in fontpath
http://bugs.freedesktop.org/31501
39094: WaitFor does not handle EIO (causes 100% cpu load)
http://bugs.freedesktop.org/39094
39383: X server crashes when restarting KDE from Alt+F2
http://bugs.freedesktop.org/39383
39949: RandR panning & scaling don't work
http://bugs.freedesktop.org/39949
43988: crtc->desiredMode.name can point to freed memory.
http://bugs.freedesktop.org/43988
44038: some 3D wine apps no longer work (bisected)
http://bugs.freedesktop.org/44038
45445: Key press crashes the xserver when kdm is running
http://bugs.freedesktop.org/45445
49170: crash when starting or after some time of using psi
http://bugs.freedesktop.org/49170
50641: xorg-server-1.12.0 - When SELinux is enabled the xserver fails
http://bugs.freedesktop.org/50641
== New Issues ==
If you encounter an issue that you think should block a future 1.12
release,
please follow the instructions listed in the wiki to raise this to our
attention.
http://www.x.org/wiki/Server112Branch
== Changes since 1.12.3 ==
Aaron Plattner (1):
randr: Fix REQUEST vs. REQUEST_SIZE_MATCH mismatch
Adam Jackson (3):
ephyr: Fix up some bizarre formatting
randr: Fix up yet another corner case in preferred mode selection
sync: Fix logic error from b55bf248581dc66321b24b29f199f6dc8d02db1b
Alan Coopersmith (10):
OtherClientGone: Remove unreachable return statement
Fix some overly indented/poorly line wrapped comments in dix/events.c
Remove obsolete tab stop comments from hw/xfree86/parser/*.c
ProcRRGetScreenInfo: swap configTimestamp as well
xf86dga2.c & xf86vmode.c: Move REQUEST_SIZE_MATCH checks before using stuff
Use calloc to zero fill buffers being allocated for replies & events
Set padding bytes to 0 in WriteToClient
Initialize padding bits to 0 in ErrorConnMax()
Fix up formatting of initializers for arrays of structs
Make indentation of dix/tables.c much more consistent and readable
Daniel Stone (5):
DRI2: Remove prototype for DRI2DestroyDrawable
Don't make failure to -nolisten fatal
Xorg: Link XKB DDX library after core server libs
Xinerama: Fix ExtensionInit prototype
AllocDevicePair: Ensure XKB privates are initialised
Dave Airlie (2):
xf86: cursor code got mangled by indenting
kinput: allocate enough space for null character.
Jaroslav Šmíd (1):
Bug 51375: Xorg doesn't set status for RRGetOutputInfo
Jeremy Huddleston (3):
XQuartz: Silence an unused-variable warning
XQuartz: Fix incorrect PseudoramiXExtensionInit prototype
XQuartz: Call xp_window_bring_all_to_front if available in libXplugin
Jeremy Huddleston Sequoia (7):
XQuartz: Fix xp_window_bring_all_to_front linking on OS versions with older libXplugin
configure.ac: Version bump to 1.12.3.901 (1.12.4 RC1)
XQuartz: console_redirect: Set the correct location for reading into the buffer
XQuartz: console_redirect: Properly zero-out the tail of the array on realloc()
configure.ac: Version bump to 1.12.3.902 (1.12.4 RC2)
XQuartz: Bump version to 2.7.3
configure.ac: Version bump to 1.12.4
Jon TURNEY (1):
hw/xquartz: Various fixes for pseudoramiX.c
Julien Cristau (1):
Bump video ABI version to 12.1
Keith Packard (4):
randr: Clean up compiler warnings about unused and shadowing variables
randr: Catch two more potential unset rrScrPriv uses
Add 'install-headers' target in the top-level Makefile
Only free Render filter names on last screen close
Michal Srb (1):
Look for ModuleData only in appropriate library
Michel Dänzer (2):
dri2: Add DRI2CreateDrawable2.
glx: Free DRI2 drawable reference to destroyed GLX drawable.
Peter Hutterer (4):
xkb: use local variable instead of casting arg
dix: fix dereference before null check
list.h: don't crash when removing an element from a NULL list
dix: make sure the mask is set for emulated scroll events (#52508)
Ricardo Salveti de Araujo (1):
randr: first check pScrPriv before using the pointer at RRFirstOutput
Simon Schubert (1):
fb: reorder Bresenham error correction to avoid overshoot.
Vic Lee (1):
ephyr: Resize screen automatically when parent window is resized
git tag: xorg-server-1.12.4
* Problems compiling VMIPS with gcc 4.7.x have been fixed.
* An error has been fixed in the Makefiles which was preventing the
canned setup code from being installed.
* An error has been fixed in the Makefiles which was preventing
CFLAGS and LDFLAGS from being set correctly in some cases.
Mesa 7.11 implements the OpenGL 2.1 API, but the version reported by glGetString(GL_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 2.1.
See the Compiling/Installing page for prerequisites for DRI hardware acceleration.
MD5 checksums
New features
None.
Bug fixes
This list is likely incomplete.
Bug 43143 - Mesa 7.11.1 fails to build at main/dlist.c:4532 with error message: "format not a string literal and no format arguments"
Incorrect handling of CopyTexImage from RGBA window to LA texture.
Changes
The full set of changes can be viewed by using the following GIT command:
git log mesa-7.11.1..mesa-7.11.2
Brian Paul (4):
mesa: stop using ctx->Driver.CopyTexImage1D/2D() hooks
mesa: fix format selection for meta CopyTexSubImage()
docs: update news.html and relnotes.html for 7.11.1 release
mesa: use format string in _mesa_error() call to silence warning
Chad Versace (3):
intel: Simplify stencil detiling arithmetic
intel: Fix region dimensions for stencil buffers received from DDX
intel: Fix separate stencil in builtin DRI2 backend
Ian Romanick (3):
docs: Add 7.11.1 release md5sums
mesa: set version string to 7.11.2-devel
mesa: Bump version to 7.11.2 (final)
pkg_src_summary:
- Option -t was added. If applied a value of TOOL_DEPENDS
is added to BUILD_DEPENDS. This option works just like -b
does for BOOTSTRAP_DEPENDS.
pkg_cmp_summary:
- Fixes for -A and -O. Now they output an empty line after each
compared package even if it appeares multiple times in
pkg_summary1. So, the output is now consistent.
Last change time was updated for manual pages
This package contains tool for HTTP(S) sniffing.
mitmproxy is an interactive, SSL-capable man-in-the-middle proxy
for HTTP with a console interface.
mitmdump is the command-line version of mitmproxy. Think tcpdump
for HTTP.
libmproxy is the library that mitmproxy and mitmdump are built on.
Netlib is a collection of network utility classes, used by the
pathod and mitmproxy projects. It differs from other projects in
some fundamental respects, because both pathod and mitmproxy often
need to violate standards. This means that protocols are implemented
as small, well-contained and flexible functions, and are designed
to allow misbehaviour when needed.
Urwid 1.1.1
* Fix for Pile not changing focus on mouse events
* Fix for Overlay.get_cursor_coords()
Urwid 1.1.0
* New common container API: focus, focus_position, contents,
options(), get_focus_path(), set_focus_path(), __getitem__,
__iter__(), __reversed__() implemented across all included
container widgets
A full description doesn't fit here, see the Container Widgets
section in the manual for details
* New Sphinx-based documentation now included in source:
Tutorial rewritten, manual revised and new reference based
on updated docstrings (by Marco Giusti, Patrick Totzke)
* New list walker SimpleFocusListWalker like SimpleListWalker but
updates focus position as items are inserted or removed
* New decoration widget WidgetDisable to disable interaction
with the widgets it wraps
* SelectableIcon selectable text widget used by button widgets is
now documented (available since 0.9.9)
* Columns widget now tries to keep column in focus visible, hiding
columns on the left when necessary
* Padding widget now defaults to ('relative', 100) instead of
'pack' so that left and right parameters are more useful and more
child widgets are supported
* New list walker "API Version 2" that is simpler for many list
walker uses; "API Version 1" will still continue to be supported
* List walkers may now allow iteration from the absolute top or
bottom of the list if they provide a positions() method
* raw_display now erases to the end of the line with EL escape
sequence to improve copy+paste behavior for some terminals
* Filler now has top and bottom parameters like Padding's left and
right parameters and accepts 'pack' instead of None as a height
value for widgets that calculate their own number of rows
* Pile and Columns now accepts 'pack' instead of 'flow' for widgets
that calculate their own number of rows or columns
* Pile and Columns now accept 'given' instead of 'fixed' for
cases where the number of rows or columns are specified by the
container options
* Pile and Columns widgets now accept any iterable to their
__init__() methods
* Widget now has a default focus_position property that raises
an IndexError when read to be consistent with new common container
API
* GridFlow now supports multiple cell widths within the same widget
* BoxWidget, FlowWidget and FixedWidget are deprecated, instead
use the sizing() function or _sizing attribute to specify the
supported sizing modes for your custom widgets
* Some new shift+arrow and numpad input sequences from RXVT and
xterm are now recognized
* Fix for alarms when used with a screen event loop (e.g.
curses_display)
* Fix for raw_display when terminal width is 1 column
* Fixes for a Columns.get_cursor_coords() regression and a
SelectableIcon.get_cursor_coords() bug
* Fixes for incorrect handling of box columns in a number of
Columns methods when that column is selectable
* Fix for Terminal widget input handling with Python 3
Urwid 1.0.3
* Fix for alarms when used with a screen event loop (e.g.
curses_display)
* Fix for Overlay.get_cursor_coords()
Urwid 1.0.2
* Fix for bug when entering Unicode text into Edit widget with
bytes caption
* Fix a regression when not running in UTF-8 mode
* Fix for a MainLoop.remove_watch_pipe() bug
* Fix for a bug when packing empty Edit widgets
* Fix for a ListBox "contents too long" error with very large
Edit widgets
* Prevent ListBoxes from selecting 0-height selectable widgets
when moving up or down
* Fix a number of bugs caused by 0-height widgets in a ListBox
Urwid 1.0.1
* Fix for Terminal widget in BSD/OSX
* Fix for a Filler mouse_event() position bug
* Fix support for mouse positions up to x=255, y=255
* Fixes for a number of string encoding issues under Python 3
* Fix for a LineBox border __init__() parameters
* Fix input input of UTF-8 in tour.py example by converting captions
to unicode
* Fix tutorial examples' use of TextCanvas and switch to using
unicode literals
* Prevent raw_display from calling tcseattr() or tcgetattr() on
non-ttys
* Disable curses_display external event loop support: screen resizing
and gpm events are not properly supported
* Mark PollingListWalker as deprecated
Urwid 1.0.0
* New support for Python 3.2 from the same 2.x code base,
requires distribute instead of setuptools (by Kirk McDonald,
Wendell, Marien Zwart) everything except TwistedEventLoop and
GLibEventLoop is supported
* New experimental Terminal widget with xterm emulation and
terminal.py example program (by aszlig)
* Edit widget now supports a mask (for passwords), has a
insert_text_result() method for full-field validation and
normalizes input text to Unicode or bytes based on the caption
type used
* New TreeWidget, TreeNode, ParentNode, TreeWalker
and TreeListBox classes for lazy expanding/collapsing tree
views factored out of browse.py example program, with new
treesample.py example program (by Rob Lanphier)
* MainLoop now calls draw_screen() just before going idle, so extra
calls to draw_screen() in user code may now be removed
* New MainLoop.watch_pipe() method for subprocess or threaded
communication with the process/thread updating the UI, and new
subproc.py example demonstrating its use
* New PopUpLauncher and PopUpTarget widgets and MainLoop option
for creating pop-ups and drop-downs, and new pop_up.py example
program
* New twisted_serve_ssh.py example (by Ali Afshar) that serves
multiple displays over ssh from the same application using
Twisted and the TwistedEventLoop
* ListBox now includes a get_cursor_coords() method, allowing
nested ListBox widgets
* Columns widget contents may now be marked to always be treated
as flow widgets for mixing flow and box widgets more easily
* New lcd_display module with support for CF635 USB LCD panel and
lcd_cf635.py example program with menus, slider controls and a custom
font
* Shared command_map instance is now stored as Widget._command_map
class attribute and may be overridden in subclasses or individual
widgets for more control over special keystrokes
* Overlay widget parameters may now be adjusted after creation with
set_overlay_parameters() method
* New WidgetPlaceholder widget useful for swapping widgets without
having to manipulate a container widget's contents
* LineBox widgets may now include title text
* ProgressBar text content and alignment may now be overridden
* Use reactor.stop() in TwistedEventLoop and document that Twisted's
reactor is not designed to be stopped then restarted
* curses_display now supports AttrSpec and external event loops
(Twisted or GLib) just like raw_display
* raw_display and curses_display now support the IBMPC character
set (currently only used by Terminal widget)
* Fix for a gpm_mev bug preventing user input when on the console
* Fix for leaks of None objects in str_util extension
* Fix for WidgetWrap and AttrMap not working with fixed widgets
* Fix for a lock up when attempting to wrap text containing wide
characters into a single character column
Urwid 0.9.9.2
* Fix for an Overlay get_cursor_coords(), and Text top-widget bug
* Fix for a Padding rows() bug when used with width=PACK
* Fix for a bug with large flow widgets used in an Overlay
* Fix for a gpm_mev bug
* Fix for Pile and GraphVScale when rendered with no contents
* Fix for a Python 2.3 incompatibility (0.9.9 is the last release
to claim support Python 2.3)
Revision 0.1.7
--------------
- License updated to vanilla BSD 2-Clause to ease package use
(http://opensource.org/licenses/BSD-2-Clause).
- Test suite made discoverable by unittest/unittest2 discovery feature.
- Fix to decoder working on indefinite length substrate -- end-of-octets
marker is now detected by both tag and value. Otherwise zero values may
interfere with end-of-octets marker.
- Fix to decoder to fail in cases where tagFormat indicates inappropriate
format for the type (e.g. BOOLEAN is always PRIMITIVE, SET is always
CONSTRUCTED and OCTET STRING is either of the two)
- Fix to REAL type encoder to force primitive encoding form encoding.
- Fix to CHOICE decoder to handle explicitly tagged, indefinite length
mode encoding
- Fix to REAL type decoder to handle negative REAL values correctly. Test
case added.
Revision 0.1.6
--------------
- The compact (valueless) way of encoding zero INTEGERs introduced in
0.1.5 seems to fail miserably as the world is filled with broken
BER decoders. So we had to back off the *encoder* for a while.
There's still the IntegerEncoder.supportCompactZero flag which
enables compact encoding form whenever it evaluates to True.
- Report package version on debugging code initialization.
Revision 0.1.5
--------------
- Documentation updated and split into chapters to better match
web-site contents.
- Make prettyPrint() working for non-initialized pyasn1 data objects. It
used to throw an exception.
- Fix to encoder to produce empty-payload INTEGER values for zeros
- Fix to decoder to support empty-payload INTEGER and REAL values
- Fix to unit test suites imports to be able to run each from
their current directory
Revision 0.1.4
--------------
- Built-in codec debugging facility added
- Added some more checks to ObjectIdentifier BER encoder catching
posible 2^8 overflow condition by two leading sub-OIDs
- Implementations overriding the AbstractDecoder.valueDecoder method
changed to return the rest of substrate behind the item being processed
rather than the unprocessed substrate within the item (which is usually
empty).
- Decoder's recursiveFlag feature generalized as a user callback function
which is passed an uninitialized object recovered from substrate and
its uninterpreted payload.
- Catch inappropriate substrate type passed to decoder.
- Expose tagMap/typeMap/Decoder objects at DER decoder to uniform API.
- Obsolete __init__.MajorVersionId replaced with __init__.__version__
which is now in-sync with distutils.
- Package classifiers updated.
- The __init__.py's made non-empty (rumors are that they may be optimized
out by package managers).
- Bail out gracefully whenever Python version is older than 2.4.
- Fix to Real codec exponent encoding (should be in 2's complement form),
some more test cases added.
- Fix in Boolean truth testing built-in methods
- Fix to substrate underrun error handling at ObjectIdentifier BER decoder
- Fix to BER Boolean decoder that allows other pre-computed
values besides 0 and 1
- Fix to leading 0x80 octet handling in DER/CER/DER ObjectIdentifier decoder.
See http://www.cosic.esat.kuleuven.be/publications/article-1432.pdf
Revision 0.1.3
--------------
- Include class name into asn1 value constraint violation exception.
- Fix to OctetString.prettyOut() method that looses leading zero when
building hex string.
Revision 0.1.2
--------------
- Fix to __long__() to actually return longs on py2k
- Fix to OctetString.__str__() workings of a non-initialized object.
- Fix to quote initializer of OctetString.__repr__()
- Minor fix towards ObjectIdentifier.prettyIn() reliability
- ObjectIdentifier.__str__() is aliased to prettyPrint()
- Exlicit repr() calls replaced with '%r'
Revision 0.1.1
--------------
- Hex/bin string initializer to OctetString object reworked
(in a backward-incompatible manner)
- Fixed float() infinity compatibility issue (affects 2.5 and earlier)
- Fixed a bug/typo at Boolean CER encoder.
- Major overhawl for Python 2.4 -- 3.2 compatibility:
+ get rid of old-style types
+ drop string module usage
+ switch to rich comparation
+ drop explicit long integer type use
+ map()/filter() replaced with list comprehension
+ apply() replaced with */**args
+ switched to use 'key' sort() callback function
+ support both __nonzero__() and __bool__() methods
+ modified not to use py3k-incompatible exception syntax
+ getslice() operator fully replaced with getitem()
+ dictionary operations made 2K/3K compatible
+ base type for encoding substrate and OctetString-based types
is now 'bytes' when running py3k and 'str' otherwise
+ OctetString and derivatives now unicode compliant.
+ OctetString now supports two python-neutral getters: asOcts() & asInts()
+ print OctetString content in hex whenever it is not printable otherwise
+ in test suite, implicit relative import replaced with the absolute one
+ in test suite, string constants replaced with numerics
Revision 0.0.13
---------------
- Fix to base10 normalization function that loops on univ.Real(0)
Revision 0.0.13b
----------------
- ASN.1 Real type is now supported properly.
- Objects of Constructed types now support __setitem__()
- Set/Sequence objects can now be addressed by their field names (string index)
and position (integer index).
- Typo fix to ber.SetDecoder code that prevented guided decoding operation.
- Fix to explicitly tagged items decoding support.
- Fix to OctetString.prettyPrint() to better handle non-printable content.
- Fix to repr() workings of Choice objects.
Revision 0.0.13a
----------------
- Major codec re-design.
- Documentation significantly improved.
- ASN.1 Any type is now supported.
- All example ASN.1 modules moved to separate pyasn1-modules package.
- Fix to initial sub-OID overflow condition detection an encoder.
- BitString initialization value verification improved.
- The Set/Sequence.getNameByPosition() method implemented.
- Fix to proper behaviour of PermittedAlphabetConstraint object.
- Fix to improper Boolean substrate handling at CER/DER decoders.
- Changes towards performance improvement:
+ all dict.has_key() & dict.get() invocations replaced with modern syntax
(this breaks compatibility with Python 2.1 and older).
+ tag and tagset caches introduced to decoder
+ decoder code improved to prevent unnecessary pyasn1 objects creation
+ allow disabling components verification when setting components to
structured types, this is used by decoder whilst running in guided mode.
+ BER decoder for integer values now looks up a small set of pre-computed
substrate values to save on decoding.
+ a few pre-computed values configured to ObjectIdentifier BER encoder.
+ ChoiceDecoder split-off SequenceOf one to save on unnecessary checks.
+ replace slow hasattr()/getattr() calls with isinstance() introspection.
+ track the number of initialized components of Constructed types to save
on default/optional components initialization.
+ added a shortcut ObjectIdentifier.asTuple() to be used instead of
__getitem__() in hotspots.
+ use Tag.asTuple() and pure integers at tag encoder.
+ introduce and use in decoder the baseTagSet attribute of the built-in
ASN.1 types.
Revision 0.0.12a
----------------
- The individual tag/length/value processing methods of
encoder.AbstractItemEncoder renamed (leading underscore stripped)
to promote overloading in cases where partial substrate processing
is required.
- The ocsp.py, ldap.py example scripts added.
- Fix to univ.ObjectIdentifier input value handler to disallow negative
sub-IDs.
