451 KiB
Documentation on the NetBSD packages system
Copyright © 1994-2004 The NetBSD Foundation, Inc
$NetBSD: pkgsrc.xml,v 1.3 2004/10/22 00:24:48 hubertf Exp $
Abstract
Information about using the NetBSD package system (pkgsrc) from both a user view for installing packages as well as from a pkgsrc developers' view for creating new packages.
Table of Contents
- 1. Introduction
- I. The pkgsrc user's guide
-
- 2. Where to get pkgsrc
- 3. Using pkgsrc on systems other than NetBSD
- 4. Using pkgsrc
- 5. Creating binary packages
- 6. Frequently Asked Questions
-
- 6.1. Is there a mailing list for pkg-related discussion?
- 6.2. Where's the pkgviews documentation?
- 6.3. Utilities for package management (pkgtools)
- 6.4. How to use pkgsrc as non-root
- 6.5. How to resume transfers when fetching distfiles?
- 6.6. How can I install/use XFree86 from pkgsrc?
- 6.7. How can I install/use X.org from pkgsrc?
- 6.8. How to fetch files from behind a firewall
- 6.9. How do I tell make fetch to do passive FTP?
- 6.10. How to fetch all distfiles at once
- 6.11. What does “Don't know how to make /usr/share/tmac/tmac.andoc” mean?
- 6.12. What does “Could not find bsd.own.mk” mean?
- 6.13. Using 'sudo' with pkgsrc
- 6.14. Configuration files handling and placement
- 6.15. Automated security checks
- II. The pkgsrc developer's guide
-
- 7. Package components - files, directories and contents
- 8. PLIST issues
- 9. Buildlink methodology
- 10. Options handling
- 11. The build process
- 12. Notes on fixes for packages
-
- 12.1. General operation
-
- 12.1.1. How to pull in variables from /etc/mk.conf
- 12.1.2. Restricted packages
- 12.1.3. Handling dependencies
- 12.1.4. Handling conflicts with other packages
- 12.1.5. Packages that cannot or should not be built
- 12.1.6. Packages which should not be deleted, once installed
- 12.1.7. Handling packages with security problems
- 12.1.8. How to handle compiler bugs
- 12.1.9. How to handle incrementing versions when fixing an existing package
- 12.1.10. Portability of packages
- 12.2. Possible downloading issues
- 12.3. Configuration gotchas
- 12.4. Building considerations
- 12.5. Package specific actions
-
- 12.5.1. Package configuration files
- 12.5.2. User interaction
- 12.5.3. Handling licenses
- 12.5.4. Creating an account from a package
- 12.5.5. Installing score files
- 12.5.6. Packages providing login shells
- 12.5.7. Packages containing perl scripts
- 12.5.8. Packages with hardcoded paths to other interpreters
- 12.5.9. Packages installing perl modules
- 12.5.10. Packages installing info files
- 12.5.11. Packages installing GConf2 data files
- 12.5.12. Packages installing scrollkeeper data files
- 12.5.13. Packages installing X11 fonts
- 12.5.14. Packages installing GTK2 modules
- 12.5.15. Packages installing SGML or XML data
- 12.5.16. Packages installing extensions to the MIME database
- 12.5.17. Packages using intltool
- 12.6. Feedback to the author
- 13. Debugging
- 14. Submitting and Committing
- A. A simple example package: bison
- B. Build logs
- C. Layout of the FTP server's package archive
- D. Editing guidelines for the pkgsrc guide
Table of Contents
There is a lot of software freely available for Unix based systems, which usually runs on NetBSD and other Unix-flavoured systems, too, sometimes with some modifications. The NetBSD Packages Collection (pkgsrc) incorporates any such changes necessary to make that software run, and makes the installation (and de-installation) of the software package easy by means of a single command.
Once the software has been built, it is manipulated with the pkg_* tools so that installation and de-installation, printing of an inventory of all installed packages and retrieval of one-line comments or more verbose descriptions are all simple.
pkgsrc currently contains several thousand packages, including:
-
www/apache - The Apache web server
-
www/mozilla - The Mozilla web browser
-
meta-pkgs/gnome - The GNOME Desktop Environment
-
meta-pkgs/kde3 - The K Desktop Environment
...just to name a few.
pkgsrc has built-in support for handling varying dependencies, such as pthreads and X11, and extended features such as IPv6 support on a range of platforms.
pkgsrc was derived from FreeBSD's ports system, and initially developed for NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following platforms:
This document is divided into two parts. The first, The pkgsrc user's guide, describes how one can use one of the packages in the Package Collection, either by installing a precompiled binary package, or by building one's own copy using the NetBSD package system. The second part, The pkgsrc developer's guide, explains how to prepare a package so it can be easily built by other NetBSD users without knowing about the package's building details.
This document is available in various formats:
There has been a lot of talk about “ports”, “packages”, etc. so far. Here is a description of all the terminology used within this document.
- Package
-
A set of files and building instructions that describe what's necessary to build a certain piece of software using pkgsrc. Packages are traditionally stored under
/usr/pkgsrc. - The NetBSD package system
-
This is the former name of “pkgsrc”. It is part of the NetBSD operating system and can be bootstrap to run on non-NetBSD operating systems as well. It handles building (compiling), installing, and removing of packages.
- Distfile
-
This term describes the file or files that are provided by the author of the piece of software to distribute his work. All the changes necessary to build on NetBSD are reflected in the corresponding package. Usually the distfile is in the form of a compressed tar-archive, but other types are possible, too. Distfiles are usually stored below
/usr/pkgsrc/distfiles. - Port
-
This is the term used by FreeBSD and OpenBSD people for what we call a package. In NetBSD terminology, “port” refers to a different architecture.
- Precompiled/binary package
-
A set of binaries built with pkgsrc from a distfile and stuffed together in a single
.tgzfile so it can be installed on machines of the same machine architecture without the need to recompile. Packages are usually generated in/usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.Sometimes, this is referred to by the term “package” too, especially in the context of precompiled packages.
- Program
-
The piece of software to be installed which will be constructed from all the files in the Distfile by the actions defined in the corresponding package.
Table of Contents
- 2. Where to get pkgsrc
- 3. Using pkgsrc on systems other than NetBSD
- 4. Using pkgsrc
- 5. Creating binary packages
- 6. Frequently Asked Questions
-
- 6.1. Is there a mailing list for pkg-related discussion?
- 6.2. Where's the pkgviews documentation?
- 6.3. Utilities for package management (pkgtools)
- 6.4. How to use pkgsrc as non-root
- 6.5. How to resume transfers when fetching distfiles?
- 6.6. How can I install/use XFree86 from pkgsrc?
- 6.7. How can I install/use X.org from pkgsrc?
- 6.8. How to fetch files from behind a firewall
- 6.9. How do I tell make fetch to do passive FTP?
- 6.10. How to fetch all distfiles at once
- 6.11. What does “Don't know how to make /usr/share/tmac/tmac.andoc” mean?
- 6.12. What does “Could not find bsd.own.mk” mean?
- 6.13. Using 'sudo' with pkgsrc
- 6.14. Configuration files handling and placement
- 6.15. Automated security checks
Table of Contents
There are three ways to get pkgsrc. Either as a tar file, via SUP, or via CVS. All three ways are described here.
To get pkgsrc going, you need to get the pkgsrc.tar.gz
file from ftp.NetBSD.org and unpack it into
/usr/pkgsrc.
As an alternative to the tar file, you can get pkgsrc via the Software Update Protocol, SUP. To do so, make sure your supfile has a line
release=pkgsrc
in it, see the examples in /usr/share/examples/supfiles, and that
the /usr/pkgsrc directory
exists. Then, simply run sup -v /path/to/your/supfile.
To get pkgsrc via CVS, make sure you have “cvs” installed. If not present on your system, it can be found as precompiled binary on ftp.NetBSD.org. To do an initial (full) checkout of pkgsrc, do the following steps:
%setenv CVSROOT anoncvs@anoncvs.NetBSD.org:/cvsroot%setenv CVS_RSH ssh%cd /usr%cvs checkout -P pkgsrc
This will create the pkgsrc directory in your /usr, and all the package source will
be stored under /usr/pkgsrc. To update pkgsrc after the
initial checkout, make sure you have CVS_RSH set as above, then do:
%cd /usr/pkgsrc%cvs -q update -dP
Please also note that it is possible to have multiple copies of the pkgsrc hierarchy in use at any one time - all work is done relatively within the pkgsrc tree.
Table of Contents
For Operating Systems other than NetBSD, we provide a bootstrap kit to build the required tools to use pkgsrc on your platform. Besides support for native NetBSD, pkgsrc and the bootstrap kit have support for the following operating systems:
-
Darwin (Mac OS X)
-
FreeBSD
-
Interix (Windows 2000, XP, 2003)
-
IRIX
-
Linux
-
OpenBSD
-
Solaris
Support for other platforms is under development.
Installing the bootstrap kit should be as simple as:
#env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout pkgsrc#cd pkgsrc/bootstrap#./bootstrap
See Chapter 2,
Where to get pkgsrc for other ways to get
pkgsrc before bootstrapping. The given
bootstrap
command will use the defaults of /usr/pkg for the prefix where programs will be
installed in, and /var/db/pkg for the package database
directory where pkgsrc will do it's internal bookkeeping.
However, these can also be set using command-line
parameters.
Binary packages for the pkgsrc tools and an initial set of packages is available for supported platforms. An up-to-date list of these can be found on www.pkgsrc.org.
Here are some platform-specific notes you should be aware of.
Darwin 5.x and 6.x are supported. There are two methods of using pkgsrc on Mac OS X, by using a disk image, or a UFS partition.
Before you start, you will need to download and install the Mac OS X Developer Tools from Apple's Developer Connection. See http://developer.apple.com/macosx/ for details. Also, make sure you install X11 for Mac OS X and the X11 SDK from http://www.apple.com/macosx/x11/download/ if you intend to build packages that use the X11 Window System.
If you already have a UFS partition, or have a spare partition that you can format as UFS, it is recommended to use that instead of the disk image. It'll be somewhat faster and will mount automatically at boot time, where you must manually mount a disk image.
Note
You cannot use a HFS+ file system for pkgsrc, because pkgsrc currently requires the filesystem to be case-sensitive, and HFS+ is not.
Create the disk image:
#cd pkgsrc/bootstrap#./ufsdiskimage create ~/Documents/NetBSD 512# megabytes - season to taste#./ufsdiskimage mount ~/Documents/NetBSD#sudo chown `id -u`:`id -g` /Volumes/NetBSD
That's it!
By default, /usr
will be on your root file system, normally HFS+. It
is possible to use the default prefix of /usr/pkg by symlinking /usr/pkg to a directory on a UFS
file system. Obviously, another symlink is required
if you want to place the package database directory
outside the prefix. e.g.
#./bootstrap --pkgdbdir=/usr/pkg/pkgdb --pkgsrcdir=/Volumes/ufs/pkgsrc
If you created your partitions at the time of
installing Mac OS X and formatted the target
partition as UFS, it should automatically mount on
/Volumes/<volume
name> when the machine boots. If you are
(re)formatting a partition as UFS, you need to ensure
that the partition map correctly reflects
“Apple_UFS”
and not “Apple_HFS”.
The problem is that none of the disk tools will let you touch a disk that is booted from. You can unmount the partition, but even if you newfs it, the partition type will be incorrect and the automounter won't mount it. It can be mounted manually, but it won't appear in Finder.
You'll need to boot off of the OS X Installation (User) CD. When the Installation program starts, go up to the menu and select Disk Utility. Now, you will be able to select the partition you want to be UFS, and Format it Apple UFS. Quit the Disk Utility, quit the installer which will reboot your machine. The new UFS file system will appear in Finder.
Be aware that the permissions on the new file system will be writable by root only.
This note is as of 10.2 (Jaguar) and applies to earlier versions. Hopefully Apple will fix Disk Utility in 10.3 (Panther).
FreeBSD 4.7 and 5.0 have been tested and are supported, other versions may work.
Care should be taken so that the tools that this kit installs do not conflict with the FreeBSD userland tools. There are several steps:
-
FreeBSD stores its ports pkg database in
/var/db/pkg. It is therefore recommended that you choose a different location (e.g./usr/pkgdb) by using the --pkgdbdir option to the bootstrap script. -
If you do not intend to use the FreeBSD ports tools, it's probably a good idea to move them out of the way to avoid confusion, e.g.
#cd /usr/sbin#mv pkg_add pkg_add.orig#mv pkg_create pkg_create.orig#mv pkg_delete pkg_delete.orig#mv pkg_info pkg_info.orig -
An example
/etc/mk.conffile will be placed in/etc/mk.conf.examplefile when you use the bootstrap script.
Interix is a POSIX compatible subsystem for the Windows NT kernel, providing a Unix-like environment with a tighter kernel integration than available with Cygwin. It is part of the Windows Services for Unix package, available for free for any licensed copy of Windows 2000, XP, or 2003. SFU can be downloaded from http://www.microsoft.com/windows/sfu/.
Services for Unix 3.5, current as of this writing, has been tested. 3.0 or 3.1 may work, but are not officially supported. (The main difference in 3.0/3.1 is lack of pthreads.)
At an absolute minimum, the following packages must be installed from the Windows Services for Unix 3.5 distribution in order to use pkgsrc:
-
Utilities -> Base Utilities
-
Interix GNU Components -> (all)
-
Remote Connectivity
-
Interix SDK
When using pkgsrc on Interix, DO NOT install the Utilities subcomponent "UNIX Perl". That is Perl 5.6 without shared module support, installed to /usr/local, and will only cause confusion. Instead, install Perl 5.8 from pkgsrc (or from a binary package).
The Remote Connectivity subcomponent "Windows Remote Shell Service" does not need to be installed, but Remote Connectivity itself should be installed in order to have a working inetd.
Finally, during installation you may be asked whether to enable setuid behavior for Interix programs, and whether to make pathnames default to case-sensitive. Setuid should be enabled, and case-sensitivity MUST be enabled. (Without case-sensitivity, a large number of packages including perl will not build.)
If SFU is already installed and you wish to alter these settings to work with pkgsrc, note the following things.
-
To uninstall UNIX Perl, use Add/Remove Programs, select Microsoft Windows Services for UNIX, then click Change. In the installer, choose Add or Remove, then uncheck Utilities->UNIX Perl.
-
To enable case-sensitivity for the filesystem, run REGEDIT.EXE, and change the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
Set the DWORD value "obcaseinsensitive" to 0; then reboot.
-
To enable setuid binaries (optional), run REGEDIT.EXE, and change the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Services for UNIX
Set the DWORD value "EnableSetuidBinaries" to 1; then reboot.
The package imanager (either the pkgsrc "su" user, or the user running "pkg_add") must be a member of the local Administrators group. Such a user must also be used to run the bootstrap. This is slightly relaxed from the normal pkgsrc requirement of "root".
The package manager should use a umask of 002. "make install" will automatically complain if this is not the case. This ensures that directories written in /var/db/pkg are Administrators-group writeable.
The popular Interix binary packages from http://www.interopsystems.com/ use an older version of pkgsrc's pkg_* tools. Ideally, these should NOT be used in conjunction with pkgsrc. If you choose to use them at the same time as the pkgsrc packages, ensure that you use the proper pkg_* tools for each type of binary package.
You will need a working C compiler, either gcc or
SGI's MIPS and MIPSpro compiler (cc/c89). Please set
the CC environment
variable according to your preference. If you do not
have a license for the MIPSpro compiler suite, you can
download a gcc tardist file from http://freeware.sgi.com/.
Please note that you will need IRIX 6.5.17 or higher, as this is the earliest version of IRIX providing support for if_indextoname(3), if_nametoindex(3), etc.
At this point in time, pkgsrc only supports one ABI. That is, you can not switch between the old 32-bit ABI, the new 32-bit ABI and the 64-bit ABI. If you start out using "abi=n32", that's what all your packages will be built with.
Therefore, please make sure that you have no
conflicting CFLAGS in your
environment or the /etc/mk.conf. Particularly, make sure
that you do not try to link n32 object files with lib64
or vice versa. Check your /etc/compiler.defaults!
If you have the actual pkgsrc tree mounted via NFS
from a different host, please make sure to set
WRKOBJDIR to a local
directory, as it appears that IRIX linker occasionally
runs into issues when trying to link over a network
mounted filesystem.
The bootstrapping process should set all the right
options for programs such as imake(1), but you may want
to set some options depending on your local setup.
Please see pkgsrc/mk/defaults/mk.conf and, of
course, your compilers man pages for details.
OpenBSD 3.0 and 3.2 are tested and supported.
Care should be taken so that the tools that this kit installs do not conflict with the OpenBSD userland tools. There are several steps:
-
OpenBSD stores its ports pkg database in
/var/db/pkg. It is therefore recommended that you choose a different location (e.g./usr/pkgdb) by using the --pkgdbdir option to the bootstrap script. -
If you do not intend to use the OpenBSD ports tools, it's probably a good idea to move them out of the way to avoid confusion, e.g.
#cd /usr/sbin#mv pkg_add pkg_add.orig#mv pkg_create pkg_create.orig#mv pkg_delete pkg_delete.orig#mv pkg_info pkg_info.orig -
An example
/etc/mk.conffile will be placed in/etc/mk.conf.examplefile when you use the bootstrap script. OpenBSD's make program uses/etc/mk.confas well. You can work around this by enclosing all the pkgsrc specific parts of the file with:.ifdef BSD_PKG_MK # pkgsrc stuff, e.g. insert defaults/mk.conf or similar here .else # OpenBSD stuff .endif
Solaris 2.6 through 9 are supported on both x86 and sparc. You will need a working C compiler. Both gcc 2.95.3 and Sun WorkShop 5 have been tested.
The following packages are required on Solaris 8 for the bootstrap process and to build packages.
-
SUNWsprot
-
SUNWarc
-
SUNWbtool
-
SUNWtoo
-
SUNWlibm
Please note the use of GNU binutils on Solaris is not supported.
It makes life much simpler if you only use the same gcc consistently for building all packages.
It is recommended that an external gcc be used only for bootstrapping, then either build gcc from lang/gcc or install a binary gcc package, then remove gcc used during bootstrapping.
Binary packages of gcc can be found through http://www.sun.com/bigadmin/common/freewareSearch.html.
You will need at least the following packages installed (from WorkShop 5.0)
-
SPROcc - Sun WorkShop Compiler C 5.0
-
SPROcpl - Sun WorkShop Compiler C++ 5.0
-
SPROild - Sun WorkShop Incremental Linker
-
SPROlang - Sun WorkShop Compilers common components
You should set CC,
CXX and optionally,
CPP in /etc/mk.conf, eg.
CC= cc CXX= CC CPP= /usr/ccs/lib/cpp
You may also want to build 64-bit binaries, eg.
CFLAGS= -xtarget=ultra -xarch=v9
Whichever compiler you use, please ensure the
compiler tools and your $prefix are in your
PATH. This includes
/usr/ccs/{bin,lib} and
eg. /usr/pkg/{bin,sbin}.
Table of Contents
This section describes how to find, retrieve and install a precompiled binary package that someone else already prepared for your type of machine.
Precompiled packages are stored on ftp.NetBSD.org
and its mirrors in the directory /pub/NetBSD/packages for anonymous
FTP access. Please pick the right subdirectory there as
indicated by uname
-p. In that directory, there is a
subdirectory for each category plus a subdirectory
All which includes the
actual binaries in .tgz
files. The category subdirectories use symbolic links
to those files (this is the same directory layout as in
/usr/pkgsrc/packages).
This same directory layout applies for CDROM
distributions, only that the directory may be rooted
somewhere else, probably somewhere below /cdrom. Please consult your CDROMs
documentation for the exact location.
If you have the files on a CDROM or downloaded them to your hard disk, youcan install them with the following command (be sure tosu to root first):
#pkg_add /path/to/package.tgz
If you have FTP access and you don't want to download the packages via FTP prior to installation, you can do this automatically by giving pkg_add an FTP URL:
#pkg_add ftp://ftp.NetBSD.org/pub/NetBSD/packages/<OSvers>/<arch>/All/package.tgz
If there is any doubt, the uname utility can be used to determine the <OSvers>, and <arch> by running uname -rp.
Also note that any prerequisite packages needed to run the package in question will be installed, too, assuming they are present where you install from.
After you've installed packages, be sure to have
/usr/pkg/bin in your
PATH so you can actually
start the just installed program.
Please pay very careful attention to the warnings expressed in the pkg_add(1) manual page about the inherent dangers of installing binary packages which you did not create yourself, and the security holes that can be introduced onto your system by indiscriminate adding of such files.
This assumes that the package is already in pkgsrc. If it is not, see Part II, “The pkgsrc developer's guide”.
To build packages from source on a NetBSD system the “comp” and the “text” distribution sets must be installed. If you want to build X11 related packages the “xbase” and “xcomp” distribution sets are required, too.
The distfile (i.e. the unmodified source) must exist on your system for the packages system to be able to build it. If it does not exist, pkgsrc will use ftp(1) to fetch it automatically.
You can overwrite some of the major distribution
sites to fit to sites that are close to your own. Have
a look at pkgsrc/mk/defaults/mk.conf to find
some examples - in particular, look for the
MASTER_SORT, MASTER_SORT_REGEX and INET_COUNTRY definitions. This may
save some of your bandwidth and time.
You can change these settings either in your shell's
environment, or, if you want to keep the settings, by
editing the /etc/mk.conf
file, and adding the definitions there.
If you don't have a permanent Internet connection
and you want to know which files to download,
make
fetch-list will tell you what you'll
need. Put these distfiles into /usr/pkgsrc/distfiles.
Assuming that the distfile has been fetched (see previous section), become root and change into the relevant directory and running make. For example, type
%cd misc/figlet%make
at the shell prompt to build the various components of the package, and
#make install
to install the various components into the correct places on your system. Installing the package on your system requires you to be root. However, pkgsrc has a just-in-time-su feature, which allows you to only become root for the actual installation step
Taking the figlet utility as an example, we can install it on our system by building as shown in Appendix B, Build logs.
The program is installed under the default root of
the packages tree - /usr/pkg. Should this not conform to
your tastes, set the LOCALBASE variable in your
environment, and it will use that value as the root of
your packages tree. So, to use /usr/local, set LOCALBASE=/usr/local in your
environment. Please note that you should use a
directory which is dedicated to packages and not shared
with other programs (ie, do not try and use
LOCALBASE=/usr). Also, you
should not try to add any of your own files or
directories (such as src/, obj/, or pkgsrc/) below the LOCALBASE tree. This is to prevent
possible conflicts between programs and other files
installed by the package system and whatever else may
have been installed there.
Some packages look in /etc/mk.conf to alter some
configuration options at build time. Have a look at
pkgsrc/mk/defaults/mk.conf to get an
overview of what will be set there by default.
Environment variables such as LOCALBASE can be set in /etc/mk.conf to save having to
remember to set them each time you want to use
pkgsrc.
Occasionally, people want to “look under the covers” to see what is going on when a package is building or being installed. This may be for debugging purposes, or out of simple curiosity. A number of utility values have been added to help with this.
-
If you invoke the make(1) command with
PKG_DEBUG_LEVEL=2, then a huge amount of information will be displayed. For example,make patch PKG_DEBUG_LEVEL=2will show all the commands that are invoked, up to and including the “patch” stage.
-
If you want to know the value of a certain make(1) definition, then the
VARNAMEdefinition should be used, in conjunction with the show-var target. e.g. to show the expansion of the make(1) variableDISTFILES:%make show-var VARNAME=LOCALBASE/usr/pkg%
If you want to install a binary package that you've
either created yourself (see next section), that you
put into pkgsrc/packages manually or that is located on
a remote FTP server, you can use the "bin-install"
target. This target will install a binary package - if
available - via
pkg_add(1), else do a
make
package. The list of remote FTP sites
searched is kept in the variable BINPKG_SITES, which defaults to
ftp.NetBSD.org. Any flags that should be added to
pkg_add(1) can be put
into BIN_INSTALL_FLAGS.
See pkgsrc/mk/defaults/mk.conf for more
details.
A final word of warning: If you setup a system that
has a non-standard setting for LOCALBASE, be sure to set that before
any packages are installed, as you can not use several
directories for the same purpose. Doing so will result
in pkgsrc not being able to properly detect your
installed packages, and fail miserably. Note also that
precompiled binary packages are usually built with the
default LOCALBASE of
/usr/pkg, and that you
should not
install any if you use a non-standard LOCALBASE.
By default, pkgsrc will use GCC to build packages. This may be overridden by setting the following variables in /etc/mk.conf:
PKGSRC_COMPILER:-
This is a list of values specifying the chain of compilers to invoke when building packages. Valid values are:
-
distcc: distributed C/C++ (chainable) -
ccache: compiler cache (chainable) -
gcc: GNU C/C++ Compiler -
mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64) -
mipspro: Silicon Graphics, Inc. MIPSpro (o32) -
sunpro: Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
The default is “
gcc”. You can useccacheand/ordistccwith an appropriatePKGSRC_COMPILERsetting, e.g. “ccache gcc”. This variable should always be terminated with a value for a real compiler. -
GCC_REQD:-
This specifies the minimum version of GCC to use when building packages. If the system GCC doesn't satisfy this requirement, then pkgsrc will build and install one of the GCC packages to use instead.
Table of Contents
Once you have built and installed a package, you can create a binary package which can be installed on another system with pkg_add(1) This saves having to build the same package on a group of hosts and wasting CPU time. It also provides a simple means for others to install your package, should you distribute it.
To create a binary package, change into the appropriate directory in pkgsrc, and run make package:
#cd misc/figlet#make package
This will build and install your package (if not
already done), and then build a binary package from what
was installed. You can then use the pkg_* tools to manipulate it.
Binary packages are created by default in /usr/pkgsrc/packages, in the form of a
gzipped tar file. See Section B.2,
“Packaging figlet” for a continuation of
the above misc/figlet example.
See Chapter 14, Submitting and Committing for information on how to submit such a binary package.
If you want to get a full set of precompiled binary packages, this section describes how to get them. Beware that the bulk build will remove all currently installed packages from your system! Having a FTP server configured either on the machine doing the bulk builds or on a nearby NFS server can help to make the packages available to everyone. See ftpd(8) for more information. If you use a remote NFS server's storage, be sure to not actually compile on NFS storage, as this slows things down a lot.
You may want to set things in /etc/mk.conf. Look at pkgsrc/mk/defaults/mk.conf for
details of the default settings. You will want to
ensure that ACCEPTABLE_LICENSES meet your local
policy. As used in this example, _ACCEPTABLE=yes accepts all licenses.
PACKAGES?= ${_PKGSRCDIR}/packages/${MACHINE_ARCH}
WRKOBJDIR?= /usr/tmp/pkgsrc # build here instead of in pkgsrc
BSDSRCDIR= /usr/src
BSDXSRCDIR= /usr/xsrc # for x11/xservers
OBJHOSTNAME?= yes # use work.`hostname`
FAILOVER_FETCH= yes # insist on the correct checksum
PKG_DEVELOPER?= yes
_ACCEPTABLE= yes
In pkgsrc/mk/bulk,
copy build.conf-example
to build.conf and edit
it, following the comments in that file. This is the
config file that determines where log files are
generated after the build, where to mail the build
report to, where your pkgsrc tree is located and
which user to
su(8) to to do a
cvs
update.
It is possible to configure the bulk build to
perform certain site specific tasks at the end of the
pre-build stage. If the file pre-build.local exists in
/usr/pkgsrc/mk/bulk it
will be executed (as a sh(1) script) at the end of
the usual pre-build stage. An example use of
pre-build.local is to
have the line:
#echo "I do not have enough disk space to build this pig." \ > pkgsrc/games/crafty-book-enormous/$BROKENF
to prevent the system from trying to build a particular package which requires nearly 3 GB of disk space.
As /usr/pkg will be
completely deleted at the start of bulk builds, make
sure your login shell is placed somewhere else. Either
drop it into /usr/local/bin (and adjust your login
shell in the passwd file), or (re-)install it via
pkg_add(1) from
/etc/rc.local, so you can
login after a reboot (remember that your current
process won't die if the package is removed, you just
can't start any new instances of the shell any more).
Also, if you use NetBSD earlier than 1.5, or you still
want to use the pkgsrc version of ssh for some reason,
be sure to install ssh before starting it from
rc.local:
( cd /usr/pkgsrc/security/ssh ; make bulk-install )
if [ -f /usr/pkg/etc/rc.d/sshd ]; then
/usr/pkg/etc/rc.d/sshd
fi
Not doing so will result in you being not able to log in via ssh after the bulk build is finished or if the machine gets rebooted or crashes. You have been warned! :)
Make sure you don't need any of the packages still installed.
Warning
During the bulk build, all packages will be removed!
Be sure to remove all other things that might
interfere with builds, like some libs installed in
/usr/local, etc. then
become root and type:
#cd /usr/pkgsrc#sh mk/bulk/build
If for some reason your last build didn't complete (power failure, system panic, ...), you can continue it by running:
#sh mk/bulk/build restart
At the end of the bulk build, you will get a summary
via mail, and find build logs in the directory
specified by FTP in the
build.conf file.
The bulk builds consist of three steps:
- 1. pre-build
-
The script updates your pkgsrc tree via (anon)cvs, then cleans out any broken distfiles, and removes all packages installed.
- 2. the bulk build
-
This is basically “make bulk-package” with an optimised order in which packages will be built. Packages that don't require other packages will be built first, and packages with many dependencies will be built later.
- 3. post-build
-
Generates a report that's placed in the directory specified in the
build.conffile namedbroken.html, a short version of that report will also be mailed to the build's admin.
During the build, a list of broken packages will be
compiled in /usr/pkgsrc/.broken (or .../.broken.${MACHINE} if
OBJMACHINE is set),
individual build logs of broken builds can be found in
the package's directory. These files are used by the
bulk-targets to mark broken builds to not waste time
trying to rebuild them, and they can be used to debug
these broken package builds later.
Currently, roughly the following requirements are valid for NetBSD 2.0/i386:
-
10 GB - distfiles (NFS ok)
-
8 GB - full set of all binaries (NFS ok)
-
5 GB - temp space for compiling (local disk recommended)
Note that all pkgs will be de-installed as soon as they are turned into a binary package, and that sources are removed, so there is no excessively huge demand to disk space. Afterwards, if the package is needed again, it will be installed via pkg_add(1) instead of building again, so there are no cycles wasted by recompiling.
If you don't want all the packages nuked from a machine (rendering it useless for anything but pkg compiling), there is the possibility of doing the pkg bulk build inside a chroot environment.
The first step is to set up a chroot sandbox, e.g.
/usr/sandbox. This can be
done by using null mounts, or manually.
There is a shell script called pkgsrc/mk/bulk/mksandbox which will
set up the sandbox environment using null mounts. It
will also create a script called sandbox in the root of the sandbox
environment, which will allow the null mounts to be
activated using the sandbox mount command and
deactivated using the sandbox umount command.
To set up a sandbox environment by hand, after
extracting all the sets from a NetBSD installation or
doing a make distribution
DESTDIR=/usr/sandbox in /usr/src/etc, be sure the following
items are present and properly configured:
-
Kernel
#cp /netbsd /usr/sandbox -
/dev/*#cd /usr/sandbox/dev ; sh MAKEDEV all -
/etc/resolv.conf(for security/smtpd and mail):#cp /etc/resolv.conf /usr/sandbox/etc -
Working(!) mail config (hostname, sendmail.cf):
#cp /etc/mail/sendmail.cf /usr/sandbox/etc/mail -
/etc/localtime(for security/smtpd):#ln -sf /usr/share/zoneinfo/UTC /usr/sandbox/etc/localtime -
/usr/src(system sources, for sysutils/aperture, net/ppp-mppe):#ln -s ../disk1/cvs .#ln -s cvs/src-1.6 src -
Create
/var/db/pkg(not part of default install):#mkdir /usr/sandbox/var/db/pkg -
Create
/usr/pkg(not part of default install):#mkdir /usr/sandbox/usr/pkg -
Checkout pkgsrc via cvs into
/usr/sandbox/usr/pkgsrc:#cd /usr/sandbox/usr#cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -d -P pkgsrcDo not mount/link this to the copy of your pkgsrc tree you do development in, as this will likely cause problems!
-
Make
/usr/sandbox/usr/pkgsrc/packagesand.../distfilespoint somewhere appropriate. NFS- and/or nullfs-mounts may come in handy! -
Edit
/etc/mk.conf, see Section 5.3.1.1, “/etc/mk.conf”. -
Adjust
mk/bulk/build.confto suit your needs. -
If you have set
CVS_USERinbuild.conf, make sure that account exists and can do a cvs ${CVS_FLAGS} update properly!
When the chroot sandbox is setup, you can start the build with the following steps:
#cd /usr/sandbox/usr/pkgsrc#sh mk/bulk/do-sandbox-build
This will just jump inside the sandbox and start
building. At the end of the build, mail will be sent
with the results of the build. Created binary pkgs will
be in /usr/sandbox/usr/pkgsrc/packages
(wherever that points/mounts to/from).
In addition to building a complete set of all
packages in pkgsrc, the pkgsrc/mk/bulk/build script may be
used to build a subset of the packages contained in
pkgsrc. By setting defining SPECIFIC_PKGS in /etc/mk.conf, the variables
-
SITE_SPECIFIC_PKGS
-
HOST_SPECIFIC_PKGS
-
GROUP_SPECIFIC_PKGS
-
USER_SPECIFIC_PKGS
will define the set of packages which should be built. The bulk build code will also include any packages which are needed as dependencies for the explicitly listed packages.
One use of this is to do a bulk build with
SPECIFIC_PKGS in a chroot
sandbox periodically to have a complete set of the
binary packages needed for your site available without
the overhead of building extra packages that are not
needed.
This section describes how pkgsrc developers can upload binary pkgs built by bulk builds to ftp.NetBSD.org.
First, make sure that you have RSYNC_DST set properly in your
mk/bulk/build.conf file,
i.e. adjust it to something like one of the
following:
RSYNC_DST=$CVS_USER@ftp.NetBSD.org:/pub/NetBSD/packages/pkgsrc-200xQy/NetBSD-a.b.c/arch/upload
Please use appropviate values for "pkgsrc-200xQ4",
"NetBSD-a.b.c" and "arch" here. If your login on
ftp.NetBSD.org is different from CVS_USER, write your login directly
into the variable, e.g. my local account is "feyrer",
but for my login "hubertf", I use:
RSYNC_DST=hubertf@ftp.NetBSD.org:/pub/NetBSD/packages/pkgsrc-200xQy/NetBSD-a.b.c/arch/upload
A separate upload
directory is used here to allow "closing" the directory
during upload. To do so, run the following command on
ftp.NetBSD.org next:
nbftp% mkdir -p -m 750 /pub/NetBSD/packages/pkgsrc-200xQy/NetBSD-a.b.c/arch/upload
Please note that /pub/NetBSD/packages is only
appropriate for packages for the NetBSD operating
system. Binary packages for other operating systems
should go into /pub/pkgsrc.
Before uploading the binary pkgs, ssh authentication needs to be setup next. This example shows how to setup temporary keys for the root account inside the sandbox (assuming that no keys should be present there usually):
#chroot /usr/sandboxchroot-#rm $HOME/.ssh/id-dsa*chroot-#ssh-keygen -t dsachroot-#cat $HOME/.ssh/id-dsa.pub
Now take the output of id-dsa.pub and append it to your
~/.ssh/authorized_keys
file on ftp.netBSD.org. You can remove the key after
the upload is done!
Next, test if your ssh connection really works:
chroot-#ssh ftp.NetBSD.org date
Use "-l yourNetBSDlogin" here as appropriate!
Now after all this works, you can exit the sandbox and start the upload:
chroot-#exit#cd /usr/sandbox/usr/pkgsrc#sh mk/bulk/do-sandbox-upload
The upload process may take quite some time. Use "ls" or "du" on the FTP server to monitor progress of the upload.
After the upload has ended, first thing is to revoke ssh access:
nbftp% vi ~/.ssh/authorized_keys
Gdd:x!
Use whatever is needed to remove the key you've
entered before! Last, move the uploaded packages out of
the upload directory to
have them accessible to everyone:
nbftp%cd /pub/NetBSD/packages/pkgsrc-200xQy/NetBSD-a.b.c/archnbftp%mv upload/* .nbftp%rmdir uploadnbftp%chmod 755 .
After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set of the resulting binary packages to assist in installing packages on other machines. The pkgtools/cdpack package provides a simple tool for creating the ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that keeps all the dependencies for given package on the same CD as that package.
Complete documentation for cdpack is found in the
cdpack(1) manpage. The following short example assumes
that the binary packages are left in /usr/pkgsrc/packages/All and that
sufficient disk space exists in /u2 to hold the ISO 9660 images.
#mkdir /u2/images#pkg_add /usr/pkgsrc/packages/All/cdpack#cdpack /usr/pkgsrc/packages/All /u2/images
If you wish to include a common set of files
(COPYRIGHT, README, etc.) on each CD in the
collection, then you need to create a directory which
contains these files. e.g.
#mkdir /tmp/common#echo "This is a README" > /tmp/common/README#echo "Another file" > /tmp/common/COPYING#mkdir /tmp/common/bin#echo "#!/bin/sh" > /tmp/common/bin/myscript#echo "echo Hello world" >> /tmp/common/bin/myscript#chmod 755 /tmp/common/bin/myscript
Now create the images:
#cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
Each image will contain README, COPYING, and bin/myscript in their root
directories.
Table of Contents
- 6.1. Is there a mailing list for pkg-related discussion?
- 6.2. Where's the pkgviews documentation?
- 6.3. Utilities for package management (pkgtools)
- 6.4. How to use pkgsrc as non-root
- 6.5. How to resume transfers when fetching distfiles?
- 6.6. How can I install/use XFree86 from pkgsrc?
- 6.7. How can I install/use X.org from pkgsrc?
- 6.8. How to fetch files from behind a firewall
- 6.9. How do I tell make fetch to do passive FTP?
- 6.10. How to fetch all distfiles at once
- 6.11. What does “Don't know how to make /usr/share/tmac/tmac.andoc” mean?
- 6.12. What does “Could not find bsd.own.mk” mean?
- 6.13. Using 'sudo' with pkgsrc
- 6.14. Configuration files handling and placement
- 6.15. Automated security checks
This section contains hints, tips & tricks on special things in pkgsrc that we didn't find a better place for in the previous chapters, and it contains items for both pkgsrc users and developers.
Yes, <tech-pkg@NetBSD.org>
is the list for discussing package related issues. To
subscribe do:
% echo subscribe tech-pkg | mail majordomo@NetBSD.org
An archive of the list is available at http://mail-index.NetBSD.org/tech-pkg/.
Pkgviews is tightly integrated with buildlink. You can
find a pkgviews User's guide in pkgsrc/mk/buildlink3/PKGVIEWS_UG.
The pkgsrc/pkgtools
directory pkgtools contains a number of useful utilities
for both users and developers of pkgsrc. This section
attempts only to make the reader aware of the utilities
and when they might be useful, and not to duplicate the
documentation that comes with each package.
Utilities used by pkgsrc (automatically installed when needed):
-
pkgtools/x11-links: symlinks for use by buildlink
OS tool augmentation (automatically installed when needed):
-
pkgtools/digest: calculates SHA1 checksums (and other kinds)
-
pkgtools/libnbcompat: compat library for pkg tools
-
pkgtools/mtree: installed on non-BSD systems due to lack of native mtree
-
pkgtools/pkg_install: up-to-date replacement for /usr/sbin/pkg_install, or for use on operating systems where pkg_install is not present
Utilities used by pkgsrc (not automatically installed):
-
pkgtools/pkg_tarup: create a binary package from an already-installed package. used by 'make replace' to save the old package
-
pkgtools/dfdisk: adds extra functionality to pkgsrc, allowing it to fetch distfiles from multiple locations. It currently supports the following methods: multiple CD-ROMs and network FTP/HTTP connections.
-
pkgtools/xpkgwedge: put X11 packages someplace else (enabled by default)
-
devel/cpuflags: will determine the best compiler flags to optimise code for your current CPU and compiler.
Utilities for keeping track of installed packages, being up to date, etc:
-
pkgtools/pkg_chk: installs pkg_chk, which reports on packages whose installed versions do not match the latest pkgsrc entries
-
pkgtools/pkgdep: makes dependency graphs of packages, to aid in choosing a strategy for updating
-
pkgtools/pkgdepgraph: make graph from above (uses graphviz)
-
pkgtools/pkglint: This provides two distinct abilities: check a pkgsrc entry for correctness (pkglint) check for and remove out-of-date distfiles and binary packages (lintpkgsrc)
-
pkgtools/pkgsurvey: report what packages you have installed
Utilities for people maintaining or creating individual packages:
-
pkgtools/pkgdiff: automate making and maintaining patches for a package (includes pkgdiff, pkgvi, mkpatches, ...)
-
pkgtools/rpm2pkg, pkgtools/url2pkg: aids in converting to pkgsrc
-
pkgtools/gensolpkg: convert pkgsrc to a Solaris package
Utilities for people maintaining pkgsrc (or more obscure pkg utilities)
-
pkgtools/pkgconflict: find packages that conflict but aren't marked as such
-
pkgtools/pkg_comp: build packages in a chrooted area
-
pkgtools/libkver: spoof kernel version for chrooted cross builds
If you want to use pkgsrc as non-root user, you can set some variables to make pkgsrc work under these conditions. Please see this message for more details.
By default resuming transfers in pkgsrc is disabled,
but you can enable this feature by adding the option
PKG_RESUME_TRANSFERS=YES
into /etc/mk.conf. If,
during a fetch step, an incomplete distfile is found,
pkgsrc will try to resume it.
You can also use a different program than the default
ftp(1) by changing the FETCH_CMD variable. Don't forget to set
FETCH_RESUME_ARGS and
FETCH_OUTPUT_ARGS if you are
not using default values.
For example, if you want to use wget to resume downloads, you'll have
to use something like:
FETCH_CMD=wget
.if defined(FETCH_CMD) && ${FETCH_CMD} == "wget"
FETCH_BEFORE_ARGS=--passive-ftp
FETCH_RESUME_ARGS=-c
FETCH_OUTPUT_ARGS=-O
.endif
If you want to use XFree86 from pkgsrc instead of your
system's own X11 (/usr/X11R6, /usr/openwin, ...), you will have to
add the following line into /etc/mk.conf:
X11_TYPE=XFree86
If you want to use X.org from pkgsrc instead of your
system's own X11 (/usr/X11R6, /usr/openwin, ...) you will have to add
the following line into /etc/mk.conf:
X11_TYPE=xorg
If you are sitting behind a firewall which does not allow direct connections to Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This is done using an environment variable in the form of a URL e.g. in Amdahl, the machine “orpheus.amdahl.com” is one of the firewalls, and it uses port 80 as the proxy port number. So the proxy environment variables are:
ftp_proxy=ftp://orpheus.amdahl.com:80/ http_proxy=http://orpheus.amdahl.com:80/
This depends on which utility is used to retrieve
distfiles. From bsd.pkg.mk,
FETCH_CMD is assigned the
first available command from the following list:
${LOCALBASE}/bin/ftp
/usr/bin/ftp
On a default NetBSD installation, this will be
/usr/bin/ftp, which
automatically tries passive connections first, and falls
back to active connections if the server refuses to do
passive. For the other tools, add the following to your
/etc/mk.conf file:
PASSIVE_FETCH=1.
Having that option present will prevent /usr/bin/ftp from falling back to
active transfers.
You would like to download all the distfiles in a single batch from work or university, where you can't run a make fetch. There is an archive of distfiles on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
The answer here is to do a make fetch-list in /usr/pkgsrc or one of it's
subdirectories, carry the resulting list to your machine
at work/school and use it there If you don't have a
NetBSD-compatible ftp(1) (like lukemftp) at work, don't
forget to set FETCH_CMD to
something that fetches a URL:
At home:
%cd /usr/pkgsrc%make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh%scp /tmp/fetch.sh work:/tmp
At work:
%sh /tmp/fetch.sh
then tar up /tmp/distfiles and take it home.
If you have a machine running NetBSD, and you want to get all distfiles (even ones that aren't for your machine architecture), you can do so by using the above-mentioned make fetch-list approach, or fetch the distfiles directly by running:
%make mirror-distfiles
If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you
can get everything by running:
%make fetch NO_SKIP=yes
When compiling the pkgtools/pkg_install package, you get
the error from make that it doesn't know how to make
/usr/share/tmac/tmac.andoc?
This indicates that you don't have installed the
“text” set on your
machine (nroff, ...). It is recommended to do that to
format manpages.
In the case of the pkgtools/pkg_install package, you can
get away with setting NOMAN=YES either in the environment or
in /etc/mk.conf.
You didn't install the compiler set, comp.tgz, when you installed your
NetBSD machine. Please get it and install it, by
extracting it in /:
#cd /#tar --unlink -zxvpf .../comp.tgz
comp.tgz is part of
every NetBSD release. Get the one that corresponds to
your release (determine via uname -r).
When installing packages as non-root user and using
the just-in-time su(1) feature of pkgsrc, it can become
annoying to type in the root password for each required
package installed. To avoid this, the sudo package can be
used, which does password caching over a limited time. To
use it, install sudo (either as binary package or from
security/sudo) and then put the
following into your /etc/mk.conf:
.if exists(/usr/pkg/bin/sudo)
SU_CMD=/usr/pkg/bin/sudo /bin/sh -c
.endif
The global variable PKG_SYSCONFBASE (and some others) can be
set by the system administrator in /etc/mk.conf to define the place where
configuration files get installed. Therefore, packages
must be adapted to support this feature. Keep in mind
that you should only install files that are strictly
necessary in the configuration directory, files that can
go to $PREFIX/share should
go there.
We will take a look at available variables first
(bsd.pkg.mk contains more
information). PKG_SYSCONFDIR
is where the configuration files for a package may be
found (that is, the full path, e.g. /etc or /usr/pkg/etc). This value may be
customized in various ways:
-
PKG_SYSCONFBASEis the main config directory under which all package configuration files are to be found. Users will typically want to set it to/etc, or accept the default location of$PREFIX/etc. -
PKG_SYSCONFSUBDIRis the subdirectory ofPKG_SYSCONFBASEunder which the configuration files for a particular package may be found. Defaults to${SYSCONFBASE}. -
PKG_SYSCONFVARis the special suffix used to distinguish any overriding values for a particular package (see next item). It defaults to${PKGBASE}, but for a collection of related packages that should all have the samePKG_SYSCONFDIRvalue, it can be set in each of the package Makefiles to a common value. -
PKG_SYSCONFDIR.${PKG_SYSCONFVAR}overrides the value of${PKG_SYSCONFDIR}for packages with the same value forPKG_SYSCONFVAR.As an example, all the various KDE packages may want to set
PKG_SYSCONFVARto “kde” so admins can setPKG_SYSCONFDIR.kdein/etc/mk.confto define where to install KDE config files.
Programs' configuration directory should be defined
during the configure stage. Packages that use GNU
autoconf can usually do this by using the
“--sysconfdir”
parameter, but this brings some problems as we will see
now. When you change this pathname in packages, you
should not allow them to install files in that directory
directly. Instead they need to install those files under
share/examples/${PKGNAME}
so PLIST can register
them.
Once you have the required configuration files in
place (under the share/examples directory) the variable
CONF_FILES should be set to
copy them into PKG_SYSCONFDIR. The contents of this
variable is formed by pairs of filenames; the first
element of the pair specifies the file inside the
examples directory (registered by PLIST) and the second element specifies
the target file. This is done this way to allow binary
packages to place files in the right directory using
INSTALL/DEINSTALL scripts which are created
automatically. The package Makefile must also set USE_PKGINSTALL=YES to use these
automatically generated scripts. The automatic copying of
config files can be toggled by setting the environment
variable PKG_CONFIG prior to
package installation.
Here is an example, taken from mail/mutt/Makefile:
EGDIR= ${PREFIX}/share/doc/mutt/samples
CONF_FILES= ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
As you can see, this package installs configuration
files inside EGDIR, which
are registered by PLIST.
After that, the variable CONF_FILES lists the installed file
first and then the target file. Users will also get an
automatic message when files are installed using this
method.
Please be aware that there can often be bugs in third-party software, and some of these bugs can leave a machine vulnerable to exploitation by attackers. In an effort to lessen the exposure, the NetBSD packages team maintains a database of known-exploits to packages which have at one time been included in pkgsrc. The database can be downloaded automatically, and a security audit of all packages installed on a system can take place. To do this, install the security/audit-packages package. It has two components:
-
“download-vulnerability-list”, an easy way to download a list of the security vulnerabilities information. This list is kept up to date by the NetBSD security officer and the NetBSD packages team, and is distributed from the NetBSD ftp server:
ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/pkg-vulnerabilities
-
“audit-packages”, an easy way to audit the current machine, checking each vulnerability which is known. If a vulnerable package is installed, it will be shown by output to stdout, including a description of the type of vulnerability, and a URL containing more information.
Use of the audit-packages package is strongly recommended!
The following message is displayed as part of the audit-packages installation procedure:
===========================================================================
$NetBSD: faq.xml,v 1.4 2005/01/11 16:05:20 wiz Exp $
You may wish to have the vulnerabilities file downloaded daily so that
it remains current. This may be done by adding an appropriate entry
to the root users crontab(5) entry. For example the entry
# download vulnerabilities file
0 3 * * * ${PREFIX}/sbin/download-vulnerability-list >/dev/null 2>&1
will update the vulnerability list every day at 3AM. You may wish to do
this more often than once a day.
In addition, you may wish to run the package audit from the daily
security script. This may be accomplished by adding the following
lines to /etc/security.local
if [ -x ${PREFIX}/sbin/audit-packages ]; then
${PREFIX}/sbin/audit-packages
fi
===========================================================================
Table of Contents
- 7. Package components - files, directories and contents
- 8. PLIST issues
- 9. Buildlink methodology
- 10. Options handling
- 11. The build process
- 12. Notes on fixes for packages
-
- 12.1. General operation
-
- 12.1.1. How to pull in variables from /etc/mk.conf
- 12.1.2. Restricted packages
- 12.1.3. Handling dependencies
- 12.1.4. Handling conflicts with other packages
- 12.1.5. Packages that cannot or should not be built
- 12.1.6. Packages which should not be deleted, once installed
- 12.1.7. Handling packages with security problems
- 12.1.8. How to handle compiler bugs
- 12.1.9. How to handle incrementing versions when fixing an existing package
- 12.1.10. Portability of packages
- 12.2. Possible downloading issues
- 12.3. Configuration gotchas
- 12.4. Building considerations
- 12.5. Package specific actions
-
- 12.5.1. Package configuration files
- 12.5.2. User interaction
- 12.5.3. Handling licenses
- 12.5.4. Creating an account from a package
- 12.5.5. Installing score files
- 12.5.6. Packages providing login shells
- 12.5.7. Packages containing perl scripts
- 12.5.8. Packages with hardcoded paths to other interpreters
- 12.5.9. Packages installing perl modules
- 12.5.10. Packages installing info files
- 12.5.11. Packages installing GConf2 data files
- 12.5.12. Packages installing scrollkeeper data files
- 12.5.13. Packages installing X11 fonts
- 12.5.14. Packages installing GTK2 modules
- 12.5.15. Packages installing SGML or XML data
- 12.5.16. Packages installing extensions to the MIME database
- 12.5.17. Packages using intltool
- 12.6. Feedback to the author
- 13. Debugging
- 14. Submitting and Committing
Table of Contents
Whenever you're preparing a package, there are a number of files involved which are described in the following sections.
Building, installation and creation of a binary
package are all controlled by the package's Makefile.
There is a Makefile for
each package. This file includes the standard
bsd.pkg.mk file (referenced
as ../../mk/bsd.pkg.mk),
which sets all the definitions and actions necessary for
the package to compile and install itself. The mandatory
variables are the DISTNAME
which specifies the base name of the distribution file to
be downloaded from the site on the Internet, MASTER_SITES which specifies that site,
CATEGORIES which denotes the
categories into which the package falls, PKGNAME which is the name of the
package, the MAINTAINER's
name, and the COMMENT
variable, which should contain a one-line description of
the package (the package name should not appear, it will
be added automatically). The maintainer variable is there
so that anyone who quibbles with the (always completely
correct) decisions taken by the guy who maintains the
package can complain vigorously, or send chocolate as a
sign of appreciation.
The MASTER_SITES may be
set to one of the predefined sites:
${MASTER_SITE_APACHE}
${MASTER_SITE_DEBIAN}
${MASTER_SITE_GNOME}
${MASTER_SITE_GNU}
${MASTER_SITE_GNUSTEP}
${MASTER_SITE_IFARCHIVE}
${MASTER_SITE_MOZILLA}
${MASTER_SITE_PERL_CPAN}
${MASTER_SITE_SOURCEFORGE}
${MASTER_SITE_SUNSITE}
${MASTER_SITE_R_CRAN}
${MASTER_SITE_SUSE}
${MASTER_SITE_TEX_CTAN}
${MASTER_SITE_XCONTRIB}
${MASTER_SITE_XEMACS}
If one of these predefined sites is chosen, you may require the ability to specify a subdirectory of that site. Since these macros may expand to more than one actual site, you must use the following construct to specify a subdirectory:
${MASTER_SITE_GNU:=subdirectory/name/}
${MASTER_SITE_SOURCEFORGE:=project_name/}
Note the trailing slash after the subdirectory name.
Note
MASTER_SITE_SUBDIR has
been deprecated and should
no longer be used.
If the package has multiple DISTFILES or multiple PATCHFILES from different sites, set
SITES_foo to a list of URI's
where file “foo”
may be found. “foo” includes the suffix, e.g.
DISTFILES= ${DISTNAME}${EXTRACT_SUFX}
DISTFILES+= foo-file.tar.gz
SITES_foo-file.tar.gz=http://www.somewhere.com/somehow/ \
http://www.somewhereelse.com/mirror/somehow/
Note that the normal default setting of DISTFILES must be made explicit if you
want to add to it (rather than replace it), as you
usually would.
Currently the following values are available for
CATEGORIES. If more than one
is used, they need to be separated by spaces:
archivers cross geography meta-pkgs security audio databases graphics misc shells benchmarks devel ham multimedia sysutils biology editors inputmethod net textproc cad emulators lang news time chat finance mail parallel wm comms fonts math pkgtools www converters games mbone print x11
Please pay attention to the following gotchas:
-
Add
MANCOMPRESSEDif manpages are installed in compressed form by the package; see comment inbsd.pkg.mk. -
Replace
/usr/localwith “${PREFIX}” in all files (see patches, below). -
If the package installs any info files, see Section 12.5.10, “Packages installing info files”.
-
Set
MAINTAINERto be yourself. If you really can't maintain the package for future updates, set it to<tech-pkg@NetBSD.org>. -
If a home page for the software in question exists, add the variable
HOMEPAGEright afterMAINTAINER. The value of this variable should be the URL for the home page. -
Be sure to set the
COMMENTvariable to a short description of the package, not containing the pkg's name.
Most important, the mandatory message digest, or checksum, of all the distfiles needed for the package to compile, confirming they match the original file distributed by the author. This ensures that the distfile retrieved from the Internet has not been corrupted during transfer or altered by a malign force to introduce a security hole. It is generated using the make makesum command. The digest algorithm used was, at one stage, md5, but that was felt lacking compared to sha1, and so sha1 is now the default algorithm. The distfile size is also generated and stored in new distinfo files. The pkgtools/digest utility calculates all of the digests in the distinfo file, and it provides various different algorithms. At the current time, the algorithms provided are: md5, rmd160, sha1, sha256, sha384 and sha512.
Some packages have different sets of distfiles on a per architecture basis, for example www/navigator). These are kept in the same distinfo file and care should be taken when upgrading such a package to ensure distfile information is not lost.
The message digest/checksum for all the official
patches found in the patches/ directory (see Section 7.3,
“patches/*”) for the package is also
stored in the distinfo
file. This is a message digest/checksum of all lines in
the patch file except the NetBSD RCS Id. This file is
generated by invoking make
makepatchsum (or make mps if you're in a
hurry).
This directory contains files that are used by the
patch(1) command to
modify the sources as distributed in the distribution
file into a form that will compile and run perfectly on
NetBSD. The files are applied successively in alphabetic
order (as returned by a shell “patches/patch-*” glob expansion), so
patch-aa is applied before
patch-ab, etc.
The patch-* files should
be in diff
-bu format, and apply without a fuzz to
avoid problems. (To force patches to apply with fuzz you
can set PATCH_FUZZ_FACTOR=-F2). Furthermore, do
not put changes for more than one file into a single
patch-file, as this will make future modifications more
difficult.
Similar, a file should be patched at most once, not several times by several different patches. If a file needs several patches, they should be combined into one file.
One important thing to mention is to pay attention that no RCS IDs get stored in the patch files, as these will cause problems when later checked into the NetBSD CVS tree. Use the pkgdiff from the pkgtools/pkgdiff package to avoid these problems.
For even more automation, we recommend using
mkpatches
from the same package to make a whole set of patches. You
just have to backup files before you edit them to
filename.orig, e.g. with
cp -p filename
filename.orig or, easier, by using
pkgvi again
from the same package. If you upgrade a package this way,
you can easily compare the new set of patches with the
previously existing one with patchdiff.
When you have finished a package, remember to generate
the checksums for the patch files by using the
make
makepatchsum command, see Section 7.2,
“distinfo”.
Patch files that are distributed by the author or
other maintainers can be listed in $PATCHFILES.
If it is desired to store any patches that should not
be committed into pkgsrc, they can be kept outside the
pkgsrc tree in the $LOCALPATCHES directory. The directory
tree there is expected to have the same
“category/package”
structure as pkgsrc, and patches are expected to be
stored inside these dirs (also known as $LOCALPATCHES/$PKGPATH). For example if
you want to keep a private patch for pkgsrc/graphics/png, keep it in
$LOCALPATCHES/graphics/png/mypatch. All
files in the named directory are expected to be patch
files, and they are applied
after pkgsrc patches are applied.
DESCR-
A multi-line description of the piece of software. This should include any credits where they are due. Please bear in mind that others do not share your sense of humour (or spelling idiosyncrasies), and that others will read everything that you write here.
PLIST-
This file governs the files that are installed on your system: all the binaries, manual pages, etc. There are other directives which may be entered in this file, to control the creation and deletion of directories, and the location of inserted files. See Chapter 8, PLIST issues for more information.
INSTALL-
This shell script is invoked twice by pkg_add(1). First time after package extraction and before files are moved in place, the second time after the files to install are moved in place. This can be used to do any custom procedures not possible with @exec commands in
PLIST. See pkg_add(1) and pkg_create(1) for more information. DEINSTALL-
This script is executed before and after any files are removed. It is this script's responsibility to clean up any additional messy details around the package's installation, since all pkg_delete knows is how to delete the files created in the original distribution. See pkg_delete(1) and pkg_create(1) for more information.
MESSAGE-
Display this file after installation of the package. Useful for things like legal notices on almost-free software and hints for updating config files after installing modules for apache, PHP etc. Please note that you can modify variables in it easily by using
MESSAGE_SUBSTin the package'sMakefile:MESSAGE_SUBST+= SOMEVAR="somevalue"
replaces "${SOMEVAR}" with “somevalue” in
MESSAGE.
When you type make the distribution files are unpacked into this directory. It can be removed by running make clean. Besides the sources, this directory is also used to keep various timestamp files.
If a package doesn't create a subdirectory for itself
(like GNU software does, for instance), but extracts
itself in the current directory, you should set
WRKSRC accordingly, e.g.
editors/sam again, but the quick
answer is:
WRKSRC= ${WRKDIR}
Please note that the old NO_WRKSUBDIR has been deprecated and
should not be used. Also, if your package doesn't create
a subdir with the name of DISTNAME but some different name, set
WRKSRC to point to the
proper name in ${WRKDIR}.
See lang/tcl and x11/tk for examples, and here is
another one:
WRKSRC= ${WRKDIR}/${DISTNAME}/unix
The name of the working directory created by pkgsrc is
work by default. If the
same pkgsrc tree should be used on several different
platforms, the variable OBJMACHINE can be set in /etc/mk.conf to
attach the platform to the directory name, e.g.
work.i386 or work.sparc.
If you have any files that you wish to be placed in
the package prior to configuration or building, you could
place these files here and use a “${CP}” command in the
“pre-configure”
target to achieve this. Alternatively, you could simply
diff the file against /dev/null and use the patch mechanism
to manage the creation of this file.
Table of Contents
The PLIST file contains a
package's “packing
list”, i.e. a list of files that belong to the
package (relative to the ${PREFIX} directory it's been installed
in) plus some additional statements - see the
pkg_create(1) manpage for
a full list. This chapter addresses some issues that need
attention when dealing with the PLIST file (or files, see below!).
Be sure to add a RCS ID line as the first thing in any
PLIST file you write:
@comment $NetBSD$
You can use the make print-PLIST command to output a PLIST that matches any new files since the package was extracted. See Section 11.3, “Other helpful targets” for more information on this target.
If you have used any of the *-dirs packages, as
explained in Section 8.8,
“Sharing directories between packages”,
you may have noticed that make print-PLIST outputs a set
of @comments instead of real
@dirrm lines. You can also
do this for specific directories and files, so that the
results of that command are very close to reality. This
helps a lot during
the update of packages.
The PRINT_PLIST_AWK
variable takes a set of AWK patterns and actions that are
used to filter the output of print-PLIST. You can
append any chunk
of AWK scripting you like to it, but be careful with
quoting.
For example, to get all files inside the libdata/foo directory removed from the
resulting PLIST:
PRINT_PLIST_AWK+= /^libdata\/foo/ { next; }
And to get all the @dirrm
lines referring to a specific (shared) directory
converted to @comments:
PRINT_PLIST_AWK+= /^@dirrm share\/specific/ { print "@comment " $$0; next; }
A number of variables are substituted automatically in PLISTs when a package is installed on a system. This includes the following variables:
${MACHINE_ARCH},${MACHINE_GNU_ARCH}-
Some packages like emacs and perl embed information about which architecture they were built on into the pathnames where they install their file. To handle this case, PLIST will be preprocessed before actually used, and the symbol “
${MACHINE_ARCH}” will be replaced by what uname -p gives. The same is done if the string${MACHINE_GNU_ARCH}is embedded in PLIST somewhere - use this on packages that have GNU autoconf created configure scripts.Legacy note
There used to be a symbol “
$ARCH” that was replaced by the output of uname -m, but that's no longer supported and has been removed. ${OPSYS},${LOWER_OPSYS},${OS_VERSION}-
Some packages want to embed the OS name and version into some paths. To do this, use these variables in the
PLIST:-
${OPSYS}- output of “uname -s” -
${LOWER_OPSYS}- lowercase common name (eg. “solaris”) -
${OS_VERSION}- “uname -r”
-
${PKGLOCALEDIR}-
Packages that install locale files should list them in the PLIST as “${PKGLOCALEDIR}/locale/de/LC_MESSAGES/...” instead of “share/locale/de/LC_MESSAGES/...”. This properly handles the fact that different operating systems expect locale files to be either in
shareorlibby default.
For a complete list of values which are replaced by
default, please look in bsd.pkg.mk (and search for PLIST_SUBST).
If you want to change other variables not listed
above, you can add variables and their expansions to this
variable in the following way, similar to MESSAGE_SUBST (see Section 7.5,
“Optional files”):
PLIST_SUBST+= SOMEVAR="somevalue"
This replaces all occurrences of “${SOMEVAR}” in the PLIST with “somevalue”.
Manpages should be installed in compressed form if
MANZ is set (in bsd.own.mk), and uncompressed
otherwise. To handle this in the PLIST file, the suffix
“.gz” is
appended/removed automatically for manpages according to
MANZ and MANCOMPRESSED being set or not, see
above for details. This modification of the PLIST file is done on a copy of it, not
PLIST itself.
To use one or more files as source for the
PLIST used in generating
the binary package, set the variable PLIST_SRC to the names of that file(s).
The files are later concatenated using cat(1), and order
of things is important.
Some packages decide to install a different set of files based on the operating system being used. These differences can be automatically handled by using the following files:
-
PLIST.common -
PLIST.${OPSYS} -
PLIST.common_end
If PLIST.${OPSYS}
exists, these files are used instead of PLIST. This allows packages which
behave in this way to be handled gracefully. Manually
overriding PLIST_SRC for
other more exotic uses is also possible.
A “shared directory” is a directory where multiple (and unrelated) packages install files. These directories are problematic because you have to add special tricks in the PLIST to conditionally remove them, or have some centralized package handle them.
Within pkgsrc, you'll find both approaches. If a directory is shared by a few unrelated packages, it's often not worth to add an extra package to remove it. Therefore, one simply does:
@unexec ${RMDIR} %D/path/to/shared/directory 2>/dev/null || ${TRUE}
in the PLISTs of all affected packages, instead of the regular "@dirrm" line.
However, if the directory is shared across many packages, two different solutions are available:
-
If the packages have a common dependency, the directory can be removed in that. For example, see textproc/scrollkeeper, which removes the shared directory
share/omf. -
If the packages using the directory are not related at all (they have no common dependencies), a *-dirs package is used.
From now on, we'll discuss the second solution. To get an idea of the *-dirs packages available, issue:
%cd .../pkgsrc%ls -d */*-dirs
Their use from other packages is very simple. The
USE_DIRS variable takes a
list of package names (without the “-dirs” part) together with the
required version number (always pick the latest one when
writting new packages).
For example, if a package installs files under
share/applications, it
should have the following line in it:
USE_DIRS+= xdg-1.1
After regenerating the PLIST using make print-PLIST, you should get the right (commented out) lines.
Note that, even if your package is using $X11BASE, it must not depend on the
*-x11-dirs packages. Just specify the name without that
part and pkgsrc (in particular, mk/dirs.mk) will take care of it.
Table of Contents
Buildlink is a framework in pkgsrc that controls what headers and libraries are seen by a package's configure and build processes. This is implemented in a two step process:
-
Symlink headers and libraries for dependencies into
BUILDLINK_DIR, which by default is a subdirectory ofWRKDIR. -
Create wrapper scripts that are used in place of the normal compiler tools that translate
-I${LOCALBASE}/includeand-L${LOCALBASE}/libinto references toBUILDLINK_DIR. The wrapper scripts also make native compiler on some operating systems look like GCC, so that packages that expect GCC won't require modifications to build with those native compilers.
This normalizes the environment in which a package is
built so that the package may be built consistently despite
what other software may be installed. Please note that the
normal system header and library paths, e.g. /usr/include, /usr/lib, etc., are always searched --
buildlink3 is designed to insulate the package build from
non-system-supplied software.
The process of converting packages to use the buildlink3 framework (“bl3ifying”) is fairly straightforward. The things to keep in mind are:
-
Set
USE_BUILDLINK3to “yes”. -
Ensure that the build always calls the wrapper scripts instead of the actual toolchain. Some packages are tricky, and the only way to know for sure is the check
${WRKDIR}/.work.logto see if the wrappers are being invoked. -
Don't override
PREFIXfrom within the package Makefile, e.g. Java VMs, standalone shells, etc., because the code to symlink files into${BUILDLINK_DIR}looks for files relative to “pkg_info -qppkgname”. -
Remember that only the
buildlink3.mkfiles that you list in a package's Makefile are added as dependencies for that package.
If a dependency on a particular package is required for its libraries and headers, then we replace:
DEPENDS+= foo>=1.1.0:../../category/foo
with
.include "../../category/foo/buildlink3.mk"
There are several buildlink3.mk files in pkgsrc/mk that handle special package
issues:
-
bdb.buildlink3.mkchooses either the native or a pkgsrc Berkeley DB implementation based on the values ofBDB_ACCEPTEDandBDB_DEFAULT. -
curses.buildlink3.mkIf the system comes with neither Curses nor NCurses, this will take care to install the devel/ncurses package. -
krb5.buildlink3.mkuses the value ofKRB5_ACCEPTEDto choose between adding a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5 implementation. -
motif.buildlink3.mkchecks for a system-provided Motif installation or adds a dependency on x11/lesstif or x11/openmotif; -
ossaudio.buildlink3.mkdefines several variables that may be used by packages that use the Open Sound System (OSS) API; -
pgsql.buildlink3.mkwill accept either Postgres 7.3 or 7.4, whichever is found installed. See the file for more information. -
pthread.buildlink3.mkuses the value ofPTHREAD_OPTSand checks for native pthreads or adds a dependency on devel/pth as needed; -
xaw.buildlink3.mkuses the value ofXAW_TYPEto choose a particular Athena widgets library.
The comments in those buildlink3.mk files provide a more
complete description of how to use them properly.
A package's buildlink3.mk file is included by
Makefiles to indicate the need to compile and link
against header files and libraries provided by the
package. A buildlink3.mk
file should always provide enough information to add the
correct type of dependency relationship and include any
other buildlink3.mk files
that it needs to find headers and libraries that it needs
in turn.
To generate an initial buildlink3.mk file for further editing,
Rene Hexel's pkgtools/createbuildlink package is
highly recommended. For most packages, the following
command will generate a good starting point for
buildlink3.mk files:
%cd pkgsrc/category/pkgdir%createbuildlink -3 >buildlink3.mk
The following real-life example buildlink3.mk is taken from
pkgsrc/graphics/tiff:
# $NetBSD: buildlink3.mk,v 1.7 2004/03/18 09:12:12 jlam Exp $
BUILDLINK_DEPTH:= ${BUILDLINK_DEPTH}+
TIFF_BUILDLINK3_MK:= ${TIFF_BUILDLINK3_MK}+
.if !empty(BUILDLINK_DEPTH:M+)
BUILDLINK_DEPENDS+= tiff
.endif
BUILDLINK_PACKAGES:= ${BUILDLINK_PACKAGES:Ntiff}
BUILDLINK_PACKAGES+= tiff
.if !empty(TIFF_BUILDLINK3_MK:M+)
BUILDLINK_DEPENDS.tiff+= tiff>=3.6.1
BUILDLINK_PKGSRCDIR.tiff?= ../../graphics/tiff
.endif # TIFF_BUILDLINK3_MK
.include "../../devel/zlib/buildlink3.mk"
.include "../../graphics/jpeg/buildlink3.mk"
BUILDLINK_DEPTH:= ${BUILDLINK_DEPTH:S/+$//}
The header and footer manipulate BUILDLINK_DEPTH, which is common
across all buildlink3.mk
files and is used to track at what depth we are
including buildlink3.mk
files.
The first section controls if the dependency on
pkg is added.
BUILDLINK_DEPENDS is the
global list of packages for which dependencies are
added by buildlink3.
The second section advises pkgsrc that the
buildlink3.mk file for
pkg has been
included at some point. BUILDLINK_PACKAGES is the global list
of packages for which buildlink3.mk files have been
included. It must always be appended to within
a buildlink3.mk file.
The third section is protected from multiple
inclusion and controls how the dependency on pkg is added. Several
important variables are set in the section:
-
BUILDLINK_DEPENDS.is the actual dependency recorded in the installed package; this should always be set using += to ensure that we're appending to any pre-existing list of values. This variable should be set to the first version of the package that had the last change in the major number of a shared library or that had a major API change.pkg -
BUILDLINK_PKGSRCDIR.is the location of thepkgpkgpkgsrc directory; -
BUILDLINK_DEPMETHOD.(not shown above) controls whether we usepkgBUILD_DEPENDSorDEPENDSto add the dependency onpkg. The build dependency is selected by settingBUILDLINK_DEPMETHOD.to “build”. By default, the full dependency is used.pkg -
BUILDLINK_INCDIRS.andpkgBUILDLINK_LIBDIRS.(not shown above) are lists of subdirectories ofpkg${BUILDLINK_PREFIX.to add to the header and library search paths. These default to “include” and “lib” respectively.pkg} -
BUILDLINK_CPPFLAGS.(not shown above) is the list of preprocessor flags to add topkgCPPFLAGS, which are passed on to the configure and build phases. The “-I” option should be avoided and instead be handled usingBUILDLINK_INCDIRS.as above.pkg
The following variables are all optionally defined
within this second section (protected against multiple
inclusion) and control which package files are
symlinked into ${BUILDLINK_DIR} and how their names
are transformed during the symlinking:
-
BUILDLINK_FILES.(not shown above) is a shell glob pattern relative topkg${BUILDLINK_PREFIX.to be symlinked intopkg}${BUILDLINK_DIR}, e.g.include/*.h. -
BUILDLINK_FILES_CMD.(not shown above) is a shell pipeline that outputs to stdout a list of files relative topkg${BUILDLINK_PREFIX.. The resulting files are to be symlinked intopkg}${BUILDLINK_DIR}. By default, this takes the+CONTENTSof apkgand filters it through${BUILDLINK_CONTENTS_FILTER..pkg} -
BUILDLINK_CONTENTS_FILTER.(not shown above) is a filter command that filterspkg+CONTENTSinput into a list of files relative to${BUILDLINK_PREFIX.on stdout. By default for overwrite packages,pkg}BUILDLINK_CONTENTS_FILTER.outputs the contents of thepkgincludeandlibdirectories in the package+CONTENTS, and for pkgviews packages, it outputs any libtool archives inlibdirectories. -
BUILDLINK_TRANSFORM.(not shown above) is a list of sed arguments used to transform the name of the source filename into a destination filename, e.g. -e "s|/curses.h|/ncurses.h|g".pkg
The last section includes any buildlink3.mk needed for pkg's library
dependencies. Including these buildlink3.mk files means that the
headers and libraries for these dependencies are also
symlinked into ${BUILDLINK_DIR} whenever the
pkg
buildlink3.mk file is
included.
There are two situations that require increasing the
dependency listed in BUILDLINK_DEPENDS. after a
package update:pkg
-
if the sonames (major number of the library version) of any installed shared libraries change;
-
if the API or interface to the header files change.
In these cases, BUILDLINK_DEPENDS. should be
adjusted to require at least the new package version.
In some cases, the packages that depend on this new
version may need their pkgPKGREVISIONs increased and, if they
have buildlink3.mk files,
their BUILDLINK_DEPENDS. adjusted, too. This is needed so
that binary packages made using it will require the
correct package dependency and not settle for an older
one which will not contain the necessary shared
libraries.
pkg
Please take careful consideration before adjusting
BUILDLINK_DEPENDS. as we don't
want to cause unneeded package deletions and rebuilds.
In many cases, new versions of packages work just fine
with older dependencies. See Section
12.1.3, “Handling dependencies” and
Chapter 9,
Buildlink methodology for more information
about dependencies on other packages, including the
pkgBUILDLINK_RECOMMENDED and
RECOMMENDED
definitions.
Some packages in pkgsrc install headers and libraries
that coincide with headers and libraries present in the
base system. Aside from a buildlink3.mk file, these packages
should also include a builtin.mk file that includes the
necessary checks to decide whether using the built-in
software or the pkgsrc software is appropriate.
The only requirements of a builtin.mk file for
pkg are:
-
It should set
USE_BUILTIN.to either “yes” or “no” after it is included.pkg -
It should not override any
USE_BUILTIN.which is already set before thepkgbuiltin.mkfile is included. -
It should be written to allow multiple inclusion. This is very important and takes careful attention to
Makefilecoding.
The following is the recommended template for builtin.mk files:
.if !defined(IS_BUILTIN.foo)
#
# IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
# genuinely exists in the system or not.
#
IS_BUILTIN.foo?= no
# BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
# version can be determined.
#
. if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
BUILTIN_PKG.foo?= foo-1.0
. endif
.endif # IS_BUILTIN.foo
.if !defined(USE_BUILTIN.foo)
USE_BUILTIN.foo?= ${IS_BUILTIN.foo}
. if defined(BUILTIN_PKG.foo)
. for _depend_ in ${BUILDLINK_DEPENDS.foo}
. if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
USE_BUILTIN.foo!= \
if ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo}; then \
${ECHO} "yes"; \
else \
${ECHO} "no"; \
fi
. endif
. endfor
. endif
.endif # USE_BUILTIN.foo
CHECK_BUILTIN.foo?= no
.if !empty(CHECK_BUILTIN.foo:M[nN][oO])
#
# Here we place code that depends on whether USE_BUILTIN.foo is set to
# "yes" or "no".
#
.endif # CHECK_BUILTIN.foo
The first section sets IS_BUILTIN. depending on
if pkgpkg really
exists in the base system. This should not be a base
system software with similar functionality to
pkg; it
should only be “yes” if the actual package is
included as part of the base system. This variable is
only used internally within the builtin.mk file.
The second section sets BUILTIN_PKG. to the
version of pkgpkg in the base system
if it exists (if IS_BUILTIN. is
“yes”). This
variable is only used internally within the
pkgbuiltin.mk file.
The third section sets USE_BUILTIN. and is
required in all
pkgbuiltin.mk files. The
code in this section must make the determination
whether the built-in software is adequate to satisfy
the dependencies listed in BUILDLINK_DEPENDS.. This is
typically done by comparing pkgBUILTIN_PKG. against each
of the dependencies in pkgBUILDLINK_DEPENDS..
pkgUSE_BUILTIN. must be set to the correct
value by the end of the pkgbuiltin.mk file. Note that
USE_BUILTIN. may be
“yes” even if
pkgIS_BUILTIN. is
“no” because we
may make the determination that the built-in version of
the software is similar enough to be used as a
replacement.pkg
The last section is guarded by CHECK_BUILTIN., and
includes code that uses the value of pkgUSE_BUILTIN. set in the
previous section. This typically includes, e.g., adding
additional dependency restrictions and listing
additional files to symlink into pkg${BUILDLINK_DIR} (via BUILDLINK_FILES.).pkg
When building packages, it's possible to choose
whether to set a global preference for using either the
built-in (native) version or the pkgsrc version of
software to satisfy a dependency. This is controlled by
setting PREFER_PKGSRC and
PREFER_NATIVE. These
variables take values of either “yes”, “no”, or a list of packages.
PREFER_PKGSRC tells pkgsrc
to use the pkgsrc versions of software, while
PREFER_NATIVE tells pkgsrc
to use the built-in versions. Preferences are
determined by the most specific instance of the package
in either PREFER_PKGSRC or
PREFER_NATIVE. If a
package is specified in neither or in both variables,
then PREFER_PKGSRC has
precedence over PREFER_NATIVE. For example, to require
using pkgsrc versions of software for all but the most
basic bits on a NetBSD system, you can set:
PREFER_PKGSRC= yes
PREFER_NATIVE= getopt skey tcp_wrappers
A package must have a builtin.mk file to be listed in
PREFER_NATIVE, otherwise
it is simply ignored in that list.
Table of Contents
Many packages have the ability to be built to support
different sets of features. bsd.options.mk is a framework in pkgsrc
that provides generic handling of those options that
determine different ways in which the packages can be
built. It's possible for the user to specify exactly which
sets of options will be built into a package or to allow a
set of global default options apply.
Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
the options that should be built into every package if
that option is supported. This variable should be set in
/etc/mk.conf.
The following example shows how bsd.options.mk should be use in a
package Makefile, or in a
file, e.g. options.mk, that
is included by the main package Makefile.
# Global and legacy options
.if defined(WIBBLE_USE_OPENLDAP) && !empty(WIBBLE_USE_OPENLDAP:M[yY][eE][sS])
PKG_DEFAULT_OPTIONS+= ldap
.endif
.if defined(USE_SASL2) && !empty(USE_SASL2:M[yY][eE][sS])
PKG_DEFAULT_OPTIONS+= sasl
.endif
PKG_OPTIONS_VAR= PKG_OPTIONS.wibble
PKG_SUPPORTED_OPTIONS= ldap sasl
#
# Default options for "wibble" package.
#
.if !defined(PKG_OPTIONS.wibble)
PKG_DEFAULT_OPTIONS+= sasl
endif
.include "../../mk/bsd.options.mk"
# Package-specific option-handling
###
### LDAP support
###
.if !empty(PKG_OPTIONS:Mldap)
. include "../../databases/openldap/buildlink3.mk"
CONFIGURE_ARGS+= --enable-ldap=${BUILDLINK_PREFIX.openldap}
.endif
###
### SASL authentication
###
.if !empty(PKG_OPTIONS:Msasl)
. include "../../security/cyrus-sasl2/buildlink3.mk"
CONFIGURE_ARGS+= --enable-sasl=${BUILDLINK_PREFIX.sasl}
.endif
The first section only exists if you are converting a
package that had its own ad-hoc options handling to use
bsd.options.mk. It converts
global or legacy options variables into an equivalent
PKG_OPTIONS. value. These
sections will be removed over time as the old options are
in turn deprecated and removed.pkg
The second section contains the information about which build options are supported by the package, and any default options settings if needed.
-
PKG_OPTIONS_VARis a list of the name of the make(1) variables that contain the options the user wishes to select. The recommended value is “PKG_OPTIONS.pkg” but any package-specific value may be used. This variable should be set in a package Makefile. -
PKG_SUPPORTED_OPTIONSis a list of build options supported by the package. This variable should be set in a package Makefile. -
${PKG_OPTIONS_VAR}(the variables named inPKG_OPTIONS_VAR) are variables that list the selected build options and override any default options given inPKG_DEFAULT_OPTIONS. If any of the options begin with a “-”, then that option is always removed from the selected build options, e.g.PKG_DEFAULT_OPTIONS= kerberos ldap sasl PKG_OPTIONS_VAR= WIBBLE_OPTIONS WIBBLE_OPTIONS= ${PKG_DEFAULT_OPTIONS} -sasl # implies PKG_OPTIONS == "kerberos ldap"or
PKG_OPTIONS_VAR= WIBBLE_OPTIONS WIBBLE_OPTIONS= kerberos -ldap ldap # implies PKG_OPTIONS == "kerberos"This variable should be set in
/etc/mk.conf.
After the inclusion of bsd.options.mk, the following variables are set:
-
PKG_OPTIONScontains the list of the selected build options, properly filtered to remove unsupported and duplicate options.
The remaining sections contain the logic that is
specific to each option. There should be a check for
every option listed in PKG_SUPPORTED_OPTIONS, and there should
be clear documentation on what turning on the option will
do in the comments preceding each section. The correct
way to check for an option is to check whether it is
listed in PKG_OPTIONS.
Table of Contents
The basic steps for building a program are always the
same. First the program's source (distfile) must be brought to the
local system and then extracted. After any patches to
compile properly on NetBSD are applied, the software can be
configured, then built (usually by compiling), and finally
the generated binaries, etc. can be put into place on the
system. These are exactly the steps performed by the NetBSD
package system, which is implemented as a series of targets
in a central Makefile, pkgsrc/mk/bsd.pkg.mk.
Before outlining the process performed by the NetBSD package system in the next section, here's a brief discussion on where programs are installed, and which variables influence this.
The automatic variable PREFIX indicates where all files of the
final program shall be installed. It is usually set to
LOCALBASE (/usr/pkg), or CROSSBASE for pkgs in the
“cross” category.
The value of PREFIX needs to
be put into the various places in the program's source
where paths to these files are encoded. See Section 7.3,
“patches/*” and Section 12.3.1,
“Shared libraries - libtool” for more
details.
When choosing which of these variables to use, follow the following rules:
-
PREFIXalways points to the location where the current pkg will be installed. When referring to a pkg's own installation path, use “${PREFIX}”. -
LOCALBASEis where all non-X11 pkgs are installed. If you need to construct a -I or -L argument to the compiler to find includes and libraries installed by another non-X11 pkg, use “${LOCALBASE}”. -
X11BASEis where the actual X11 distribution (from xsrc, etc.) is installed. When looking for standard X11 includes (not those installed by a pkg), use “${X11BASE}”. -
X11 based are special in that they may be installed in either
X11BASEorLOCALBASE.Usually, X11 packages should be installed under
LOCALBASEwhenever possible. Note that you will need to setUSE_X11in them to request the presence of X11 and to get the right compilation flags.Even though, there are some packages that cannot be installed under
LOCALBASE: those that come with app-defaults files. These packages are special and they must be placed underX11BASE. To accomplish this, set eitherUSE_X11BASEorUSE_IMAKEin your package.Some notes:
USE_X11andUSE_X11BASEare mutually exclusive. If you need to find includes or libraries installed by a pkg that hasUSE_IMAKEorUSE_X11BASEin its pkgMakefile, you need to use both${X11BASE}and${LOCALBASE}. To force installation of all X11 packages inLOCALBASE, the pkgtools/xpkgwedge is enabled by default. -
X11PREFIXshould be used to refer to the installed location of an X11 package.X11PREFIXwill be set toX11BASEif xpkgwedge is not installed, and toLOCALBASEif xpkgwedge is installed. -
If xpkgwedge is installed, it is possible to have some packages installed in
X11BASEand some inLOCALBASE. To determine the prefix of an installed package, theEVAL_PREFIXdefinition can be used. It takes pairs in the format “DIRNAME=<package>”, and the make(1) variableDIRNAMEwill be set to the prefix of the installed package <package>, or “${X11PREFIX}” if the package is not installed.This is best illustrated by example.
The following lines are taken from
pkgsrc/wm/scwm/Makefile:EVAL_PREFIX+= GTKDIR=gtk+ CONFIGURE_ARGS+= --with-guile-prefix=${LOCALBASE} \ --with-gtk-prefix="${GTKDIR}" \ --enable-multibyteSpecific defaults can be defined for the packages evaluated using
EVAL_PREFIX, by using a definition of the form:GTKDIR_DEFAULT= ${LOCALBASE}where
GTKDIRcorresponds to the first definition in theEVAL_PREFIXpair. -
Within
${PREFIX}, packages should install files according to hier(7), with the exception that manual pages go into${PREFIX}/man, not${PREFIX}/share/man.
The main targets used during the build process defined
in bsd.pkg.mk are:
- fetch
-
This will check if the file(s) given in the variables
DISTFILESandPATCHFILES(as defined in the package's Makefile) are present on the local system in/usr/pkgsrc/distfiles. If they are not present, an attempt will be made to fetch them using commands of the form:${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}where ${site} varies through several possibilities in turn: first,
MASTER_SITE_OVERRIDEis tried, then the sites specified in eitherSITES_fileif defined, elseMASTER_SITESorPATCH_SITES, as applies, then finally the value ofMASTER_SITE_BACKUP. The order of all except the first can be optionally sorted by the user, via setting eitherMASTER_SORT_AWKorMASTER_SORT_REGEX. - checksum
-
After the distfile(s) are fetched, their checksum is generated and compared with the checksums stored in the distinfo file. If the checksums don't match, the build is aborted. This is to ensure the same distfile is used for building, and that the distfile wasn't changed, e.g. by some malign force, deliberately changed distfiles on the master distribution site or network lossage.
- extract
-
When the distfiles are present on the local system, they need to be extracted, as they are usually in the form of some compressed archive format, most commonly
.tar.gz.If only some of the distfiles need to be uncompressed, the files to be uncompressed should be put into
EXTRACT_ONLY.If the distfiles are not in
.tar.gzformat, they can be extracted by setting eitherEXTRACT_SUFX, orEXTRACT_CMD,EXTRACT_BEFORE_ARGSandEXTRACT_AFTER_ARGS. In the former case, pkgsrc knows how to extract a number of suffixes (.tar.gz,.tgz,.tar.gz2,.tbz,.tar.Z,.tar,.shar.gz,.shar.bz2,.shar.Z,.shar,.Z,.bz2and.gz; see the definition of the variousDECOMPRESS_CMDvariablesbsd.pkg.mkfor a complete list). Here's an example on how to use the other variables for a program that comes with a compressed shell archive whose name ends in.msg.gz:EXTRACT_SUFX= .msg.gz EXTRACT_CMD= zcat EXTRACT_BEFORE_ARGS= EXTRACT_AFTER_ARGS= |sh - patch
-
After extraction, all the patches named by the
PATCHFILES, those present in the patches subdirectory of the package as well as in $LOCALPATCHES/$PKGPATH (e.g./usr/local/patches/graphics/png) are applied. Patchfiles ending in.Zor.gzare uncompressed before they are applied, files ending in.origor.rejare ignored. Any special options to patch(1) can be handed inPATCH_DIST_ARGS. See Section 7.3, “patches/*” for more details.By default patch(1) is given special args to make it fail if the patches apply with some lines of fuzz. Please fix (regen) the patches so that they apply cleanly. The rationale behind this is that patches that don't apply cleanly may end up being applied in the wrong place, and cause severe harm there.
- configure
-
Most pieces of software need information on the header files, system calls, and library routines which are available in NetBSD. This is the process known as configuration, and is usually automated. In most cases, a script is supplied with the source, and its invocation results in generation of header files, Makefiles, etc.
If the program's distfile contains its own configure script, this can be invoked by setting
HAS_CONFIGURE. If the configure script is a GNU autoconf script,GNU_CONFIGUREshould be specified instead. In either case, any arguments to the configure script can be specified in theCONFIGURE_ARGSvariable, and the configure script's name can be set inCONFIGURE_SCRIPTif it differs from the default “configure”. Here's an example from the sysutils/top package:HAS_CONFIGURE= yes CONFIGURE_SCRIPT= Configure CONFIGURE_ARGS+= netbsd13
If the program uses an Imakefile for configuration, the appropriate steps can be invoked by setting
USE_IMAKEto “YES”. (If you only want the package installed in$X11PREFIXbut xmkmf not being run, setUSE_X11BASEinstead!) - build
-
Once configuration has taken place, the software will be built by invoking
$MAKE_PROGRAMon$MAKEFILEwith$BUILD_TARGETas the target to build. The defaultMAKE_PROGRAMis “gmake” ifUSE_GNU_TOOLScontains “make”, “make” otherwise.MAKEFILEis set to “Makefile” by default, andBUILD_TARGETdefaults to “all”. Any of these variables can be set in the package's Makefile to change the default build process. - install
-
Once the build stage has completed, the final step is to install the software in public directories, so users can access the programs and files. As in the build-target,
$MAKE_PROGRAMis invoked on$MAKEFILEhere, but with the$INSTALL_TARGETinstead, the latter defaulting to “install” (plus “install.man”, ifUSE_IMAKEis set).
If no target is specified, the default is “build”. If a subsequent stage is requested, all prior stages are made: e.g. make build will also perform the equivalent of:
make fetch make checksum make extract make patch make configure make build
- pre/post-*
-
For any of the main targets described in the previous section, two auxiliary targets exist with “pre-” and “post-” used as a prefix for the main target's name. These targets are invoked before and after the main target is called, allowing extra configuration or installation steps be performed from a package's Makefile, for example, which a program's configure script or install target omitted.
- do-*
-
Should one of the main targets do the wrong thing, and should there be no variable to fix this, you can redefine it with the do-* target. (Note that redefining the target itself instead of the do-* target is a bad idea, as the pre-* and post-* targets won't be called anymore, etc.) You will not usually need to do this.
- reinstall
-
If you did a make install and you noticed some file was not installed properly, you can repeat the installation with this target, which will ignore the “already installed” flag.
- deinstall
-
This target does a pkg_delete(1) in the current directory, effectively de-installing the package. The following variables can be used to tune the behaviour:
PKG_VERBOSE-
Add a "-v" to the pkg_delete(1) command.
DEINSTALLDEPENDS-
Remove all packages that require (depend on) the given package. This can be used to remove any packages that may have been pulled in by a given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding “-R” to the pkg_delete(1) command line.
- update
-
This target causes the current package to be updated to the latest version. The package and all depending packages first get de-installed, then current versions of the corresponding packages get compiled and installed. This is similar to manually noting which packages are currently installed, then performing a series of make deinstall and make install (or whatever
UPDATE_TARGETis set to) for these packages.You can use the “update” target to resume package updating in case a previous make update was interrupted for some reason. However, in this case, make sure you don't call make clean or otherwise remove the list of dependent packages in
WRKDIR. Otherwise you lose the ability to automatically update the current package along with the dependent packages you have installed.Resuming an interrupted make update will only work as long as the package tree remains unchanged. If the source code for one of the packages to be updated has been changed, resuming make update will most certainly fail!
The following variables can be used either on the command line or in
/etc/mk.confto alter the behaviour of make update:UPDATE_TARGET-
Install target to recursively use for the updated package and the dependent packages. Defaults to
DEPENDS_TARGETif set, “install” otherwise for make update. e.g. make update UPDATE_TARGET=package NOCLEAN-
Don't clean up after updating. Useful if you want to leave the work sources of the updated packages around for inspection or other purposes. Be sure you eventually clean up the source tree (see the “clean-update” target below) or you may run into troubles with old source code still lying around on your next make or make update.
REINSTALL-
Deinstall each package before installing (making
DEPENDS_TARGET). This may be necessary if the “clean-update” target (see below) was called after interrupting a running make update. DEPENDS_TARGET-
Allows you to disable recursion and hardcode the target for packages. The default is “update” for the update target, facilitating a recursive update of prerequisite packages. Only set
DEPENDS_TARGETif you want to disable recursive updates. UseUPDATE_TARGETinstead to just set a specific target for each package to be installed during make update (see above).
- clean-update
-
Clean the source tree for all packages that would get updated if make update was called from the current directory. This target should not be used if the current package (or any of its depending packages) have already been de-installed (e.g., after calling make update) or you may lose some packages you intended to update. As a rule of thumb: only use this target before the first time you run make update and only if you have a dirty package tree (e.g., if you used
NOCLEAN).If you unsure about whether your tree is clean you can either perform a make clean at the top of the tree, or use the following sequence of commands from the directory of the package you want to update (before running make update for the first time, otherwise you lose all the packages you wanted to update!):
#make clean-update#make clean CLEANDEPENDS=YES#make updateThe following variables can be used either on the command line or in
/etc/mk.confto alter the behaviour of make clean-update:CLEAR_DIRLIST-
After make clean, do not reconstruct the list of directories to update for this package. Only use this if make update successfully installed all packages you wanted to update. Normally, this is done automatically on make update, but may have been suppressed by the
NOCLEANvariable (see above).
- info
-
This target invokes pkg_info(1) for the current package. You can use this to check which version of a package is installed.
- readme
-
This target generates a
README.htmlfile, which can be viewed using a browser such as www/mozilla or www/links. The generated files contain references to any packages which are in thePACKAGESdirectory on the local host. The generated files can be made to refer to URLs based onFTP_PKG_URL_HOSTandFTP_PKG_URL_DIR. For example, if I wanted to generateREADME.htmlfiles which pointed to binary packages on the local machine, in the directory/usr/packages, setFTP_PKG_URL_HOST=file://localhostandFTP_PKG_URL_DIR=/usr/packages. The${PACKAGES}directory and its subdirectories will be searched for all the binary packages. - readme-all
-
Use this target to create a file
README-all.htmlwhich contains a list of all packages currently available in the NetBSD Packages Collection, together with the category they belong to and a short description. This file is compiled from thepkgsrc/*/README.htmlfiles, so be sure to run this after a make readme. - cdrom-readme
-
This is very much the same as the “readme” target (see above), but is to be used when generating a pkgsrc tree to be written to a CD-ROM. This target also produces
README.htmlfiles, and can be made to refer to URLs based onCDROM_PKG_URL_HOSTandCDROM_PKG_URL_DIR. - show-distfiles
-
This target shows which distfiles and patchfiles are needed to build the package. (
DISTFILESandPATCHFILES, but notpatches/*) - show-downlevel
-
This target shows nothing if the package is not installed. If a version of this package is installed, but is not the version provided in this version of pkgsrc, then a warning message is displayed. This target can be used to show which of your installed packages are downlevel, and so the old versions can be deleted, and the current ones added.
- show-pkgsrc-dir
-
This target shows the directory in the pkgsrc hierarchy from which the package can be built and installed. This may not be the same directory as the one from which the package was installed. This target is intended to be used by people who may wish to upgrade many packages on a single host, and can be invoked from the top-level pkgsrc Makefile by using the “show-host-specific-pkgs” target.
- show-installed-depends
-
This target shows which installed packages match the current package's
DEPENDS. Useful if out of date dependencies are causing build problems. - check-shlibs
-
After a package is installed, check all its binaries and (on ELF platforms) shared libraries to see if they find the shared libs they need. Run by default if
PKG_DEVELOPERis set in/etc/mk.conf. - print-PLIST
-
After a “make install” from a new or upgraded pkg, this prints out an attempt to generate a new
PLISTfrom a find -newer work/.extract_done. An attempt is made to care for shared libs etc., but it is strongly recommended to review the result before putting it intoPLIST. On upgrades, it's useful to diff the output of this command against an already existingPLISTfile.If the package installs files via tar(1) or other methods that don't update file access times, be sure to add these files manually to your
PLIST, as the “find -newer” command used by this target won't catch them!See Section 8.3, “Tweaking output of make print-PLIST” for more information on this target.
- bulk-package
-
Used to do bulk builds. If an appropriate binary package already exists, no action is taken. If not, this target will compile, install and package it (and it's depends, if
PKG_DEPENDSis set properly. See Section 5.3.1, “Configuration”. After creating the binary package, the sources, the just-installed package and it's required packages are removed, preserving free disk space.Beware that this target may deinstall all packages installed on a system!
- bulk-install
-
Used during bulk-installs to install required packages. If an upto-date binary package is available, it will be installed via pkg_add(1). If not, make bulk-package will be executed, but the installed binary not be removed.
A binary package is considered “upto-date” to be installed via pkg_add(1) if:
-
None of the package's files (
Makefile, ...) were modified since it was built. -
None of the package's required (binary) packages were modified since it was built.
Beware that this target may deinstall all packages installed on a system!
-
Table of Contents
- 12.1. General operation
-
- 12.1.1. How to pull in variables from /etc/mk.conf
- 12.1.2. Restricted packages
- 12.1.3. Handling dependencies
- 12.1.4. Handling conflicts with other packages
- 12.1.5. Packages that cannot or should not be built
- 12.1.6. Packages which should not be deleted, once installed
- 12.1.7. Handling packages with security problems
- 12.1.8. How to handle compiler bugs
- 12.1.9. How to handle incrementing versions when fixing an existing package
- 12.1.10. Portability of packages
- 12.2. Possible downloading issues
- 12.3. Configuration gotchas
- 12.4. Building considerations
- 12.5. Package specific actions
-
- 12.5.1. Package configuration files
- 12.5.2. User interaction
- 12.5.3. Handling licenses
- 12.5.4. Creating an account from a package
- 12.5.5. Installing score files
- 12.5.6. Packages providing login shells
- 12.5.7. Packages containing perl scripts
- 12.5.8. Packages with hardcoded paths to other interpreters
- 12.5.9. Packages installing perl modules
- 12.5.10. Packages installing info files
- 12.5.11. Packages installing GConf2 data files
- 12.5.12. Packages installing scrollkeeper data files
- 12.5.13. Packages installing X11 fonts
- 12.5.14. Packages installing GTK2 modules
- 12.5.15. Packages installing SGML or XML data
- 12.5.16. Packages installing extensions to the MIME database
- 12.5.17. Packages using intltool
- 12.6. Feedback to the author
The problem with package-defined variables that can
be overridden via MAKECONF
or /etc/mk.conf is that
make(1) expands a
variable as it is used, but evaluates preprocessor like
statements (.if, .ifdef and .ifndef) as they are read.
So, to use any variable (which may be set in
/etc/mk.conf) in one of
the .if* statements, the file /etc/mk.conf must be included before
that .if* statement.
Rather than have a number of ad-hoc ways of
including /etc/mk.conf,
should it exist, or MAKECONF, should it exist, include the
pkgsrc/mk/bsd.prefs.mk
file in the package Makefile before any
preprocessor-like .if, .ifdef, or .ifndef
statements:
.include "../../mk/bsd.prefs.mk"
.if defined(USE_MENUS)
...
.endif
If you wish to set the CFLAGS variable in /etc/mk.conf please make sure to
use:
CFLAGS+= -your -flags
Using CFLAGS= (i.e.
without the “+”)
may lead to problems with packages that need to add
their own flags. Also, you may want to take a look at
the devel/cpuflags package if you're
interested in optimization for the current CPU.
Some licenses restrict how software may be re-distributed. In order to satisfy these restrictions, the package system defines five make variables that can be set to note these restrictions:
-
RESTRICTEDThis variable should be set whenever a restriction exists (regardless of its kind). Set this variable to a string containing the reason for the restriction.
-
NO_BIN_ON_CDROMBinaries may not be placed on CD-ROM. Set this variable to
${RESTRICTED}whenever a binary package may not be included on a CD-ROM. -
NO_BIN_ON_FTPBinaries may not be placed on an FTP server. Set this variable to
${RESTRICTED}whenever a binary package may not not be made available on the Internet. -
NO_SRC_ON_CDROMDistfiles may not be placed on CD-ROM. Set this variable to
${RESTRICTED}if re-distribution of the source code or other distfile(s) is not allowed on CD-ROMs. -
NO_SRC_ON_FTPDistfiles may not be placed on FTP. Set this variable to
${RESTRICTED}if re-distribution of the source code or other distfile(s) via the Internet is not allowed.
Please note that the use of NO_PACKAGE, IGNORE, NO_CDROM, or other generic make
variables to denote restrictions is deprecated, because
they unconditionally prevent users from generating
binary packages!
Your package may depend on some other package being
present - and there are various ways of expressing this
dependency. pkgsrc supports the BUILD_DEPENDS and DEPENDS definitions, as well as
dependencies via buildlink3.mk, which is the preferred
way to handle dependencies, and which uses the
variables named above. See Chapter 9,
Buildlink methodology for more
information.
The basic difference between the two variables is as
follows: The DEPENDS
definition registers that pre-requisite in the binary
package so it will be pulled in when the binary package
is later installed, whilst the BUILD_DEPENDS definition does not,
marking a dependency that is only needed for building
the package.
This means that if you only need a package present
whilst you are building, it should be noted as a
BUILD_DEPENDS.
The format for a BUILD_DEPENDS and a DEPENDS definition is:
<pre-req-package-name>:../../<category>/<pre-req-package>
Please note that the “pre-req-package-name” may include any of the wildcard version numbers recognised by pkg_info(1).
-
If your package needs another package's binaries or libraries to build or run, and if that package has a
buildlink3.mkfile available, use it:.include "../../graphics/jpeg/buildlink3.mk" -
If your package needs to use another package to build itself and there is no
buildlink3.mkfile available, use theBUILD_DEPENDSdefinition:BUILD_DEPENDS+= autoconf-2.13:../../devel/autoconf
-
If your package needs a library with which to link and again there is no
buildlink3.mkfile available, this is specified using theDEPENDSdefinition. An example of this is the print/lyx package, which uses the xpm library, version 3.4j to build:DEPENDS+= xpm-3.4j:../../graphics/xpm
You can also use wildcards in package dependences:
DEPENDS+= xpm-[0-9]*:../../graphics/xpm
Note that such wildcard dependencies are retained when creating binary packages. The dependency is checked when installing the binary package and any package which matches the pattern will be used. Wildcard dependencies should be used with care.
The “-[0-9]*” should be used instead of “-*” to avoid potentially ambiguous matches such as “tk-postgresql” matching a “tk-*”
DEPENDS.Wildcards can also be used to specify that a package will only build against a certain minimum version of a pre-requisite:
DEPENDS+= tiff>=3.5.4:../../graphics/tiff
This means that the package will build against version 3.5.4 of the tiff library or newer. Such a dependency may be warranted if, for example, the API of the library has changed with version 3.5.4 and a package would not compile against an earlier version of tiff.
Please note that such dependencies should only be updated if a package requires a newer pre-requisite, but not to denote recommendations such as security updates or ABI changes that do not prevent a package from building correctly. Such recommendations can be expressed using
RECOMMENDED:RECOMMENDED+= tiff>=3.6.1:../../graphics/tiff
In addition to the above
DEPENDSline, this denotes that while a package will build against tiff>=3.5.4, at least version 3.6.1 is recommended.RECOMMENDEDentries will be turned into dependencies unless explicitly ignored (in which case a warning will be printed). Packages that are built with recommendations ignored may not be uploaded to ftp.NetBSD.org by developers and should not be used across different systems that may have different versions of binary packages installed.For security fixes, please update the package vulnerabilities file as well as setting
RECOMMENDED, see Section 12.1.7, “Handling packages with security problems” for more information. -
If your package needs some executable to be able to run correctly and if there's agail no
buildlink3.mkfile, this is specified using theDEPENDSvariable. The print/lyx package needs to be able to execute the latex binary from the teTeX package when it runs, and that is specified:DEPENDS+= teTeX-[0-9]*:../../print/teTeX
The comment about wildcard dependencies from previous paragraph applies here, too.
If your package needs files from another package to build, see the first part of the “do-configure” target print/ghostscript5 package (it relies on the jpeg sources being present in source form during the build):
if [ ! -e ${_PKGSRCDIR}/graphics/jpeg/${WRKDIR:T}/jpeg-6b ]; then \
cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} extract; \
fi
If you build any other packages that way, please make sure the working files are deleted too when this package's working files are cleaned up. The easiest way to do so is by adding a pre-clean target:
pre-clean:
cd ${_PKGSRCDIR}/../../graphics/jpeg && ${MAKE} clean
Please also note the BUILD_USES_MSGFMT and BUILD_USES_GETTEXT_M4 definitions,
which are provided as convenience definitions. The
former works out whether msgfmt(1) is part of the base
system, and, if it isn't, installs the devel/gettext package. The latter
adds a build dependency on either an installed version
of an older gettext package, or if it isn't, installs
the devel/gettext-m4 package.
Your package may conflict with other packages a user might already have installed on his system, e.g. if your package installs the same set of files like another package in our pkgsrc tree.
In this case you can set CONFLICTS to a space separated list of
packages (including version string) your package
conflicts with.
For example x11/Xaw3d and x11/Xaw-Xpm install provide the
same shared library, thus you set in pkgsrc/x11/Xaw3d/Makefile:
CONFLICTS= Xaw-Xpm-[0-9]*
and in pkgsrc/x11/Xaw-Xpm/Makefile:
CONFLICTS= Xaw3d-[0-9]*
Packages will automatically conflict with other packages with the name prefix and a different version string. “Xaw3d-1.5” e.g. will automatically conflict with the older version “Xaw3d-1.3”.
There are several reasons why a package might be
instructed to not build under certain circumstances. If
the package builds and runs on most platforms, the
exceptions should be noted with NOT_FOR_PLATFORM. If the package
builds and runs on a small handful of platforms, set
ONLY_FOR_PLATFORM instead.
If the package should be skipped (for example, because
it provides functionality already provided by the
system), set PKG_SKIP_REASON to a descriptive
message. If the package should fail because some
preconditions are not met, set PKG_FAIL_REASON to a descriptive
message.
IGNORE is deprecated
because it didn't provide enough information to
determine whether the build should fail.
To ensure that a package may not be deleted, once it
has been installed, the PKG_PRESERVE definition should be set
in the package Makefile. This will be carried into any
binary package that is made from this pkgsrc entry. A
“preserved”
package will not be deleted using
pkg_delete(1) unless
the “-f” option
is used.
When a vulnerability is found, this should be noted
in localsrc/security/advisories/pkg-vulnerabilities,
and after the commit of that file, it should be copied
to both /pub/NetBSD/packages/distfiles/pkg-vulnerabilities
and /pub/NetBSD/packages/distfiles/vulnerabilities
on ftp.NetBSD.org using localsrc/security/advisories/Makefile.
In addition, if a buildlink3.mk file exists for an
affected package, bumping PKGREVISION and creating a
corresponding BUILDLINK_RECOMMENDED. entry should
be considered. See Chapter 9,
Buildlink methodology for more information
about writing pkgbuildlink3.mk files and BUILDLINK_* definitions.
Also, if the fix should be applied to the stable pkgsrc branch, be sure to submit a pullup request!
Some source files trigger bugs in the compiler, based on combinations of compiler version and architecture and almost always relation to optimisation being enabled. Common symptoms are gcc internal errors or never finishing compiling a file.
Typically a workaround involves testing the
MACHINE_ARCH and compiler
version, disabling optimisation for that
file/MACHINE_ARCH/compiler
combination, and documenting it in pkgsrc/doc/HACKS. See that file for a
number of examples!
When making fixes to an existing package it can be
useful to change the version number in PKGNAME. To avoid conflicting with
future versions by the original author, a
“nb1”,
“nb2”, ...
suffix can be used on package versions by setting
PKGREVISION=1 (2, ...).
The “nb” is
treated like a “.” by the pkg tools. e.g.
DISTNAME= foo-17.42
PKGREVISION= 9
will result in a PKGNAME of “foo-17.42nb9”.
When a new release of the package is released, the
PKGREVISION should be
removed. e.g. on a new minor release of the above
package, things should be like:
DISTNAME= foo-17.43
One appealing feature of pkgsrc is that it runs on many different platforms. As a result, it is important to ensure, where possible, that packages in pkgsrc are portable. There are some particular details you should pay attention to while working on pkgsrc.
If you need to download from a dynamic URL you can
set DYNAMIC_MASTER_SITES
and a make
fetch will call files/getsite.sh with the name of
each file to download as an argument, expecting it to
output the URL of the directory from which to download
it. graphics/ns-cult3d is an example of
this usage.
If the download can't be automated, because the user
must submit personal information to apply for a
password, or must pay for the source, or whatever, you
can set _FETCH_MESSAGE to
a macro which displays a message explaining the
situation. _FETCH_MESSAGE
must be executable shell commands, not just a message.
(Generally, it executes ${ECHO}). As of this writing, the
following packages use this: audio/realplayer, cad/simian, devel/ipv6socket, emulators/vmware-module, fonts/acroread-jpnfont, sysutils/storage-manager, www/ap-aolserver, www/openacs. Try to be consistent
with them.
Sometimes authors of a software package make some
modifications after the software was released, and they
put up a new distfile without changing the package's
version number. If a package is already in pkgsrc at
that time, the md5 checksum will no longer match. The
correct way to work around this is to update the
package's md5 checksum to match the package on the
master site (beware, any mirrors may not be up to date
yet!), and to remove the old distfile from
ftp.NetBSD.org's /pub/NetBSD/packages/distfiles
directory. Furthermore, a mail to the package's author
seems appropriate making sure the distfile was really
updated on purpose, and that no trojan horse or so
crept in.
pkgsrc supports many different machines, with different object formats like a.out and ELF, and varying abilities to do shared library and dynamic loading at all. To accompany this, varying commands and options have to be passed to the compiler, linker, etc. to get the Right Thing, which can be pretty annoying especially if you don't have all the machines at your hand to test things. The devel/libtool pkg can help here, as it just “knows” how to build both static and dynamic libraries from a set of source files, thus being platform independent.
Here's how to use libtool in a pkg in seven simple steps:
-
Add
USE_LIBTOOL=yesto the package Makefile. -
For library objects, use “${LIBTOOL} --mode=compile ${CC}” in place of “${CC}”. You could even add it to the definition of
CC, if only libraries are being built in a given Makefile. This one command will build both PIC and non-PIC library objects, so you need not have separate shared and non-shared library rules. -
For the linking of the library, remove any “ar”, “ranlib”, and “ld -Bshareable” commands, and instead use:
${LIBTOOL} --mode=link ${CC} -o ${.TARGET:.a=.la} ${OBJS:.o=.lo} -rpath ${PREFIX}/lib -version-info major:minorNote that the library is changed to have a
.laextension, and the objects are changed to have a.loextension. ChangeOBJSas necessary. This automatically creates all of the.a,.so.major.minor, and ELF symlinks (if necessary) in the build directory. Be sure to include “-version-info”, especially when major and minor are zero, as libtool will otherwise strip off the shared library version.From the libtool manual:
So, libtool library versions are described by three integers: CURRENT The most recent interface number that this library implements. REVISION The implementation number of the CURRENT interface. AGE The difference between the newest and oldest interfaces that this library implements. In other words, the library implements all the interface numbers in the range from number `CURRENT - AGE' to `CURRENT'. If two libraries have identical CURRENT and AGE numbers, then the dynamic linker chooses the library with the greater REVISION number.The “-release” option will produce different results for a.out and ELF (excluding symlinks) in only one case. An ELF library of the form “libfoo-release.so.x.y” will have a symlink of “libfoo.so.x.y” on an a.out platform. This is handled automatically.
The “-rpath argument” is the install directory of the library being built.
In the
PLIST, include all of the.a,.la, and.so,.so.andmajor.so.files.major.minor -
When linking shared object (
.so) files, i.e. files that are loaded via dlopen(3), NOT shared libraries, use “-module -avoid-version” to prevent them getting version tacked on.The
PLISTfile gets thefoo.soentry. -
When linking programs that depend on these libraries before they are installed, preface the cc(1) or ld(1) line with “${LIBTOOL} --mode=link”, and it will find the correct libraries (static or shared), but please be aware that libtool will not allow you to specify a relative path in -L (such as “-L../somelib”), because it expects you to change that argument to be the
.lafile. e.g.${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelibshould be changed to:
${LIBTOOL} --mode=link ${CC} -osomeprog../somelib/somelib.laand it will do the right thing with the libraries.
-
When installing libraries, preface the install(1) or cp(1) command with “${LIBTOOL} --mode=install”, and change the library name to
.la. e.g.${LIBTOOL} --mode=install ${BSD_INSTALL_DATA} ${SOMELIB:.a=.la} ${PREFIX}/libThis will install the static
.a, shared library, any needed symlinks, and run ldconfig(8). -
In your
PLIST, include all of the.a,.la, and.so,.so.CURRENTand.so.CURRENT.REVISIONfiles (this is a change from the previous behaviour).
Add USE_LIBTOOL=yes to
the package Makefile. This will override the package's
own libtool in most cases. For older libtool using
packages, libtool is made by ltconfig script during the
do-configure step; you can check the libtool script
location by doing make
configure; find work*/ -name
libtool.
LIBTOOL_OVERRIDE
specifies which libtool scripts, relative to
WRKSRC, to override. By
default, it is set to “libtool */libtool */*/libtool”. If
this does not match the location of the package's
libtool script(s), set it as appropriate.
If you do not need *.a
static libraries built and installed, then use
SHLIBTOOL_OVERRIDE
instead.
If your package makes use of the platform
independent library for loading dynamic shared objects,
that comes with libtool (libltdl), you should include
the libtool buildlink3.mk (and set USE_BUILDLINK3=YES).
Some packages use libtool incorrectly so that the package may not work or build in some circumstances. Some of the more common errors are:
-
The inclusion of a shared object (-module) as a dependent library in an executable or library. This in itself isn't a problem if one of two things has been done:
-
The shared object is named correctly, i.e.
libfoo.la, notfoo.la -
The -dlopen option is used when linking an executable.
-
-
The use of libltdl without the correct calls to initialisation routines. The function lt_dlinit() should be called and the macro
LTDL_SET_PRELOADED_SYMBOLSincluded in executables.
If a package needs GNU autoconf or automake to be
executed to regenerate the configure script and
Makefile.in makefile templates, then they should be
executed in a pre-configure target. Two Makefile
fragments are provided in pkgsrc/mk/autoconf.mk and
pkgsrc/mk/automake.mk to
help dealing with these tools. See comments in these
files for details.
For packages that need only autoconf:
AUTOCONF_REQD= 2.50 # if default version is not good enough
...
pre-configure:
cd ${WRKSRC}; ${AUTOCONF}
...
.include "../../mk/autoconf.mk"
and for packages that need automake and autoconf:
AUTOMAKE_REQD= 1.7.1 # if default version is not good enough
...
pre-configure:
cd ${WRKSRC}; \
${ACLOCAL}; \
${AUTOHEADER}; \
${AUTOMAKE} -a --foreign -i; \
${AUTOCONF}
...
.include "../mk/automake.mk"
Packages which use GNU Automake will almost
certainly require GNU Make, but that's automatically
provided for you in mk/automake.mk.
There are times when the configure process makes
additional changes to the generated files, which then
causes the build process to try to re-execute the
automake sequence. This is prevented by touching
various files in the configure stage. If this causes
problems with your package you can set AUTOMAKE_OVERRIDE=NO in the package
Makefile.
To port an application to NetBSD, it's usually necessary for the compiler to be able to judge the system on which it's compiling, and we use definitions so that the C pre-processor can do this.
To test whether you are working on a 4.4 BSD-derived
system, you should use the BSD definition, which is
defined in <sys/param.h> on said
systems.
#include <sys/param.h>
and then you can surround the BSD-specific parts of your package's C/C++ code using this conditional:
#if (defined(BSD) && BSD >= 199306)
...
#endif
Please use the “__NetBSD__” definition sparingly - it should only apply to features of NetBSD that are not present in other 4.4-lite derived BSDs.
Packages should be taught to look for their
configuration files in ${PKG_SYSCONFDIR}, which is passed
through to the configure and build processes.
PKG_SYSCONFDIR may be
customized in various ways by setting other make
variables:
-
PKG_SYSCONFBASEis the main config directory under which all package configuration files are to be found. This defaults to${PREFIX}/etc, but may be overridden in/etc/mk.conf. -
PKG_SYSCONFSUBDIRis the subdirectory ofPKG_SYSCONFBASEunder which the configuration files for a particular package may be found, e.g. the Apache configuration files may all be found under thehttpd/subdirectory of${PKG_SYSCONFBASE}. This should be set in the package Makefile. -
By default,
PKG_SYSCONFDIRis set to${PKG_SYSCONFBASE}/${PKG_SYSCONFSUBDIR}, but this may be overridden by settingPKG_SYSCONFDIR.${PKG_SYSCONFVAR}for a particular package, wherePKG_SYSCONFVARdefaults to${PKGBASE}. This is not meant to be set by a package Makefile, but is reserved for users who wish to override thePKG_SYSCONFDIRsetting for a particular package with a special location.
The only variables that users should customize are
PKG_SYSCONFBASE and
PKG_SYSCONFDIR.${PKG_SYSCONFVAR}.
Users will typically want to set PKG_SYSCONFBASE to /etc, or to accept the default
location of ${PREFIX}/etc.
Occasionally, packages require interaction from the user, and this can be in a number of ways:
-
help in fetching the distfiles
-
help to configure the package before it is built
-
help during the build process
-
help during the installation of a package
The INTERACTIVE_STAGE
definition is provided to notify the pkgsrc mechanism
of an interactive stage which will be needed, and this
should be set in the package's Makefile. e.g.
INTERACTIVE_STAGE= build
Multiple interactive stages can be specified:
INTERACTIVE_STAGE= configure install
A package may underly a license which the user has or has not agreed to accept. Usually, packages that underly well-known Open Source licenses (e.g. the GNU Public License, GPL) won't have any special license tags added in pkgsrc which require special action by the user of such packages, but there are quite a number of other licenses out there that pkgsrc users may not be able to follow, for whatever reasons. For these cases, pkgsrc contains a mechanism to note that a package underlies a certain license, and the user has to accept the license before the package can be installed.
Placing a certain package under a certain license
works by setting the LICENSE variable to a string
identifying the license, e.g. in graphics/graphviz:
LICENSE= graphviz-license
When trying to build, the user will get a notice that the package underlies a license which he hasn't accepted (yet):
%make===> graphviz-1.12 has an unacceptable license: graphviz-license. ===> To build this package, add this line to your /etc/mk.conf: ===> ACCEPTABLE_LICENSES+=graphviz-license ===> To view the license, enter "/usr/bin/make show-license". *** Error code 1
The license can be viewed with make show-license, and if it
is considered appropriate, the line printed above can
be added to /etc/mk.conf
to indicate acceptance of the particular license:
ACCEPTABLE_LICENSES+=graphviz-license
When adding a package with a new license, the
license text should be added to pkgsrc/licenses for displaying. A
list of known licenses can be seen in this directory as
well as by looking at the list of (commented out)
ACCEPTABLE_LICENSES
variable settings in pkgsrc/mk/defaults/mk.conf.
Is there is a really pressing need to
accept all licenses at once, like when trying to
download or mirror all distfiles or doing a bulk build
to test if all packages in pkgsrc build, this can be
done by setting _ACCEPTABLE=yes.
There are two make variables used to control the
creation of package-specific groups and users at
pre-install time. The first is PKG_GROUPS, which is a list of
group[:groupid] elements, where the groupid is
optional. The second is PKG_USERS, which is a list of elements
of the form:
user:group[:[userid][:[description][:[home][:shell]]]]
where only the user and group are required, the rest being optional. A simple example is:
PKG_GROUPS= foogroup
PKG_USERS= foouser:foogroup
A more complex example is that creates two groups and two users is:
PKG_GROUPS= group1 group2:1005
PKG_USERS= first:group1::First\\ User \
second:group2::Second\\ User:/home/second:${SH}
By default, a new user will have home directory
/nonexistent, and login
shell /sbin/nologin
unless they are specified as part of the user
element.
The package Makefile
must also set USE_PKGINSTALL=YES. This will cause
the users and groups to be created at pre-install time,
and the admin will be prompted to remove them at
post-deinstall time. Automatic creation of the users
and groups can be toggled on and off by setting the
PKG_CREATE_USERGROUP
variable prior to package installation.
Certain packages, most of them in the games
category, install a score file that allows all users on
the system to record their highscores. In order for
this to work, the binaries need to be installed setgid
and the score files owned by the appropriate group
and/or owner (traditionally the "games" user/group).
The following variables, documented in more detail in
mk/defaults/mk.conf,
control this behaviour: SETGIDGAME, GAMEDATAMODE, GAMEGRP, GAMEMODE, GAMEOWN.
Note that per default, setgid installation of games
is disabled; setting SETGIDGAME=YES will set all the other
variables accordingly.
A package should therefor never hard code file
ownership or access permissions but rely on
INSTALL_GAME and
INSTALL_GAME_DATA to set
these correctly.
If the purpose of the package is to provide a login
shell, the variable PKG_SHELL should contain the full
pathname of the shell executable installed by this
package. The package Makefile must also set USE_PKGINSTALL=YES to use the
automatically generated INSTALL/DEINSTALL scripts.
An example taken from shells/zsh:
USE_PKGINSTALL= YES
PKG_SHELL= ${PREFIX}/bin/zsh
The shell is registered into /etc/shells file automatically in the
post-install target by the generated INSTALL script and removed in the
deinstall target by the DEINSTALL script.
If your package contains interpreted perl scripts,
set REPLACE_PERL to ensure
that the proper interpreter path is set. REPLACE_PERL should contain a list of
scripts, relative to WRKSRC, that you want adjusted.
Your package may also contain scripts with hardcoded
paths to other interpreters besides (or as well as)
perl. To correct the full pathname to the script
interpreter, you need to set the following definitions
in your Makefile (we
shall use tclsh in this example):
REPLACE_INTERPRETER+= tcl
_REPLACE.tcl.old= .*/bin/tclsh
_REPLACE.tcl.new= ${PREFIX}/bin/tclsh
_REPLACE_FILES.tcl= ...list of tcl scripts which need to be fixed,
relative to ${WRKSRC}, just as in REPLACE_PERL
Makefiles of packages providing perl5 modules should
include the Makefile fragment ../../lang/perl5/module.mk. It
provides a do-configure target for the
standard perl configuration for such modules as well as
various hooks to tune this configuration. See comments
in this file for details.
Perl5 modules will install into different places
depending on the version of perl used during the build
process. To address this, pkgsrc will append lines to
the PLIST corresponding
to the files listed in the installed .packlist file generated by most
perl5 modules. This is invoked by defining PERL5_PACKLIST to a space-separated
list of paths to packlist files, e.g.:
PERL5_PACKLIST= ${PERL5_SITEARCH}/auto/Pg/.packlist
The variables PERL5_SITELIB, PERL5_SITEARCH, and PERL5_ARCHLIB represent the three
locations in which perl5 modules may be installed, and
may be used by perl5 packages that don't have a
packlist. These three variables are also substituted
for in the PLIST.
Some packages install info files or use the “makeinfo” or “install-info” commands. Each of the info files:
-
is considered to be installed in the directory
${PREFIX}/${INFO_DIR}, -
is registered in the Info directory file
${PREFIX}/${INFO_DIR}/dir, -
and must be listed as a filename in the
INFO_FILESvariable in the package Makefile.
INFO_DIR defaults to
“info” and can
be overridden in the package Makefile. INSTALL and DEINSTALL scripts will be generated
to handle registration of the info files in the Info
directory file. The “install-info” command used for the
info files registration is either provided by the
system, or by a special purpose package automatically
added as dependency if needed.
A package which needs the “makeinfo” command at build time
must define the variable USE_MAKEINFO in its Makefile. If a
minimum version of the “makeinfo” command is needed it
should be noted with the TEXINFO_REQD variable in the package
Makefile. By default, a
minimum version of 3.12 is required. If the system does
not provide a makeinfo command or if it
does not match the required minimum, a build dependency
on the devel/gtexinfo package will be
added automatically.
The build and installation process of the software
provided by the package should not use the
install-info command as the
registration of info files is the task of the package
INSTALL script, and it
must use the appropriate makeinfo command.
To achieve this goal the pkgsrc infrastructure
creates overriding scripts for the install-info and
makeinfo
commands in a directory listed early in PATH.
The script overriding install-info has no effect
except the logging of a message. The script overriding
makeinfo
logs a message and according to the value of
USE_MAKEINFO and
TEXINFO_REQD either run
the appropriate makeinfo command or exit on
error.
If a package installs .schemas or .entries files, used by GConf2, you
need to take some extra steps to make sure they get
registered in the database:
-
Include
../../devel/GConf2/schemas.mkinstead of itsbuildlink3.mkfile. This takes care of rebuilding the GConf2 database at installation and deinstallation time, and tells the package where to install GConf2 data files using some standard configure arguments. It also disallows any access to the database directly from the package. -
Ensure that the package installs its
.schemasfiles under${PREFIX}/share/gconf/schemas. If they get installed under${PREFIX}/etc, you will need to manually patch the package. -
Check the PLIST and remove any entries under the etc/gconf directory, as they will be handled automatically. See Section 6.14, “Configuration files handling and placement” for more information.
-
Define the
GCONF2_SCHEMASvariable in yourMakefilewith a list of all.schemasfiles installed by the package, if any. Names must not contain any directories in them. -
Define the
GCONF2_ENTRIESvariable in yourMakefilewith a list of all.entriesfiles installed by the package, if any. Names must not contain any directories in them.
If a package installs .omf files, used by scrollkeeper, you
need to take some extra steps to make sure they get
registered in the database:
-
Include
../../textproc/scrollkeeper/omf.mkinstead of itsbuildlink3.mkfile. This takes care of rebuilding the scrollkeeper database at installation and deinstallation time, and disallows any access to it directly from the package. -
Check the PLIST and remove any entries under the
libdata/scrollkeeperdirectory, as they will be handled automatically. -
Remove the
share/omfdirectory from the PLIST. It will be handled by scrollkeeper.
If a package installs font files, you will need to
rebuild the fonts database in the directory where they
get installed at installation and deinstallation time.
This can be automatically done by using mk/fonts.mk, which you need to
include in your Makefile.
When the file is included, you can list the
directories where fonts are installed in the
FONTS_
variables, where type_DIRStype can be one of
“TTF”,
“TYPE1” or
“X11”. Also make
sure that the database file fonts.dir is not listed in the
PLIST.
Note that you should not create new directories for fonts; instead use the standard ones to avoid that the user needs to manually configure his X server to find them.
If a package installs gtk2 immodules or loaders, you need to take some extra steps to get them registered in the GTK2 database properly:
-
Include
../../x11/gtk2/modules.mkinstead of itsbuildlink3.mkfile. This takes care of rebuilding the database at installation and deinstallation time. -
Set
GTK2_IMMODULES=YESif your package installs GTK2 immodules. -
Set
GTK2_LOADERS=YESif your package installs GTK2 loaders. -
Patch the package to not touch any of the gtk2 databases directly. These are:
-
libdata/gtk-2.0/gdk-pixbuf.loaders -
libdata/gtk-2.0/gtk.immodules
-
-
Check the PLIST and remove any entries under the
libdata/gtk-2.0directory, as they will be handled automatically.
If a package installs SGML or XML data files that need to be registered in system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some extra steps:
-
Include
../../textproc/xmlcatmgr/catalogs.mkin yourMakefile, which takes care of registering those files in system-wide catalogs at installation and deinstallation time. -
Set
SGML_CATALOGSto the full path of any SGML catalogs installed by the package. -
Set
XML_CATALOGSto the full path of any XML catalogs installed by the package. -
Set
SGML_ENTRIESto individual entries to be added to the SGML catalog. These come in groups of three strings; see xmlcatmgr(1) for more information (specifically, arguments recognized by the 'add' action). Note that you will normally not use this variable. -
Set
XML_ENTRIESto individual entries to be added to the XML catalog. These come in groups of three strings; see xmlcatmgr(1) for more information (specifically, arguments recognized by the 'add' action). Note that you will normally not use this variable.
If a package provides extensions to the MIME
database by installing .xml files inside ${PREFIX}/share/mime/packages, you
need to take some extra steps to ensure that the
database is kept consistent with respect to these new
files:
-
Include
../../databases/shared-mime-info/mimedb.mk(avoid using thebuildlink3.mkfile from this same directory, which is reserved for inclusion from otherbuildlink3.mkfiles). It takes care of rebuilding the MIME database at installation and deinstallation time, and disallows any access to it directly from the package. -
Check the PLIST and remove any entries under the
share/mimedirectory, except for files saved undershare/mime/packages. The former are handled automatically by the update-mime-database program, but the later are package-dependent and must be removed by the package that installed them in the first place. -
Remove any
share/mime/*directories from the PLIST. They will be handled by the shared-mime-info package.
If a package uses intltool during its build, include
the ../../textproc/intltool/buildlink3.mk
file, which forces it to use the intltool package
provided by pkgsrc, instead of the one bundled with the
distribution file.
This tracks intltool's build-time dependencies and uses the latest available version; this way, the package benefits of any bug fixes that may have appeared since it was released.
If you have found any bugs in the package you make available, if you had to do special steps to make it run under NetBSD or if you enhanced the software in various other ways, be sure to report these changes back to the original author of the program! With that kind of support, the next release of the program can incorporate these fixes, and people not using the NetBSD packages system can win from your efforts.
Support the idea of free software!
To check out all the gotchas when building a package, here are the steps that I do in order to get a package working. Please note this is basically the same as what was explained in the previous sections, only with some debugging aids.
-
Be sure to set
PKG_DEVELOPER=1in/etc/mk.conf -
Install pkgtools/url2pkg, create a directory for a new package, change into it, then run url2pkg:
%mkdir /usr/pkgsrc/category/examplepkg%cd /usr/pkgsrc/category/examplepkg%url2pkg http://www.example.com/path/to/distfile.tar.gz -
Edit the
Makefileas requested. -
Fill in the
DESCRfile -
Run make configure
-
Add any dependencies glimpsed from documentation and the configure step to the package's
Makefile. -
Make the package compile, doing multiple rounds of
%make%pkgvi ${WRKSRC}/some/file/that/does/not/compile%mkpatches%patchdiff%mv ${WRKDIR}/.newpatches/* patches%make mps%make cleanDoing as non-root user will ensure that no files are modified that shouldn't be, especially during the build phase. mkpatches, patchdiff and pkgvi are from the pkgtools/pkgdiff package.
-
Look at the
Makefile, fix if necessary; see Section 7.1, “Makefile”. -
Generate a
PLIST:#make install#make print-PLIST >PLIST#make deinstall#make install#make deinstallYou usually need to be
rootto do this. Look if there are any files left:#make print-PLISTIf this reveals any files that are missing in
PLIST, add them. -
Now that the
PLISTis OK, install the package again and make a binary package:#make reinstall#make package -
Delete the installed package:
#pkg_delete blub -
Repeat the above make print-PLIST command, which shouldn't find anything now:
#make print-PLIST -
Reinstall the binary package:
#pkgadd .../blub.tgz -
Play with it. Make sure everything works.
-
Run pkglint from pkgtools/pkglint, and fix the problems it reports:
#pkglint -
Submit (or commit, if you have cvs access); see Chapter 14, Submitting and Committing.
Table of Contents
You have to separate between binary and “normal” (source) packages here:
-
precompiled binary packages
Our policy is that we accept binaries only from pkgsrc developers to guarantee that the packages don't contain any trojan horses etc. This is not to annoy anyone but rather to protect our users! You're still free to put up your home-made binary packages and tell the world where to get them. NetBSD developers doing bulk builds and wanting to upload them please see Section 5.3.8, “Uploading results of a bulk build”.
-
packages
First, check that your package is complete, compiles and runs well; see Chapter 13, Debugging and the rest of this document. Next, generate an uuencoded gzipped tar(1) archive, preferably with all files in a single directory. Finally, send-pr with category “pkg”, a synopsis which includes the package name and version number, a short description of your package (contents of the COMMENT variable or DESCR file are OK) and attach the archive to your PR.
If you want to submit several packages, please send a separate PR for each one, it's easier for us to track things that way.
Alternatively, you can also import new packages into pkgsrc-wip (“pkgsrc work-in-progress”); see the homepage at http://pkgsrc-wip.sourceforge.net/ for details.
This section is only of interest for pkgsrc developers with write access to the pkgsrc repository. Please remember that cvs imports files relative to the current working directory, and that the pathname that you give the cvs import command is so that it knows where to place the files in the repository. Newly created packages should be imported with a vendor tag of “TNF” and a release tag of “pkgsrc-base”, e.g:
% cd .../pkgsrc/category/pkgname % cvs import pkgsrc/category/pkgname TNF pkgsrc-base
Remember to move the directory from which you imported
out of the way, or cvs will complain the next time you
“cvs update” your
source tree. Also don't forget to add the new package to
the category's Makefile.
The commit message of the initial import should
include part of the DESCR
file, so people reading the mailing lists know what the
package is/does.
Please note all package updates/additions in
pkgsrc/doc/CHANGES. It's
very important to keep this file up to date and
conforming to the existing format, because it will be
used by scripts to automatically update pages on www.NetBSD.org
and other sites. Additionally, check the pkgsrc/doc/TODO
file and remove the entry for the package you updated, in
case it was mentioned there.
For new packages, “cvs import” is preferred to “cvs add” because the former gets everything with a single command, and provides a consistent tag.
Please always put a concise, appropriate and relevant summary of the changes between old and new versions into the commit log when updating a package. There are various reasons for this:
-
A URL is volatile, and can change over time. It may go away completely or its information may be overwritten by newer information.
-
Having the change information between old and new versions in our CVS repository is very useful for people who use either cvs or anoncvs.
-
Having the change information between old and new versions in our CVS repository is very useful for people who read the pkgsrc-changes mailing list, so that they can make tactical decisions about when to upgrade the package.
Please also recognise that, just because a new version of a package has been released, it should not automatically be upgraded in the CVS repository. We prefer to be conservative in the packages that are included in pkgsrc - development or beta packages are not really the best thing for most places in which pkgsrc is used. Please use your judgement about what should go into pkgsrc, and bear in mind that stability is to be preferred above new and possibly untested features.
-
Make a copy of the directory somewhere else.
-
Remove all CVS dirs.
Alternatively to the first two steps you can also do:
%cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/packageand use that for further work.
-
Fix
CATEGORIESand anyDEPENDSpaths that just did “../package” instead of “../../category/package”. -
cvs import the modified package in the new place.
-
Check if any package depends on it:
%cd /usr/pkgsrc%grep /package */*/Makefile* */*/buildlink* -
Fix paths in packages from step 5 to point to new location.
-
cvs rm (-f) the package at the old location.
-
Remove from
oldcategory/Makefile. -
Add to
newcategory/Makefile. -
Commit the changed and removed files:
%cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile(and any packages from step 5, of course).
Table of Contents
We checked to find a piece of software that wasn't in the packages collection, and picked GNU bison. Quite why someone would want to have bison when Berkeley yacc is already present in the tree is beyond us, but it's useful for the purposes of this exercise.
# $NetBSD$
#
DISTNAME= bison-1.25
CATEGORIES= devel
MASTER_SITES= ${MASTER_SITE_GNU}
MAINTAINER= thorpej@NetBSD.org
HOMEPAGE= http://www.gnu.org/software/bison/bison.html
COMMENT= GNU yacc clone
GNU_CONFIGURE= yes
INFO_FILES= bison.info
.include "../../mk/bsd.pkg.mk"
GNU version of yacc. Can make re-entrant parsers, and numerous other improvements. Why you would want this when Berkeley yacc(1) is part of the NetBSD source tree is beyond me.
The NetBSD package system comes with pkgtools/pkglint which helps to check the contents of these files. After installation it is quite easy to use, just change to the directory of the package you wish to examine and execute pkglint:
$pkglintOK: checking ./DESCR. OK: checking Makefile. OK: checking distinfo. OK: checking patches/patch-aa. looks fine.
Depending on the supplied command line arguments (see pkglint(1)) more verbose checks will be performed. Use e.g. pkglint -v for a very verbose check.
Create the directory where the package lives, plus any auxiliary directories:
#cd /usr/pkgsrc/lang#mkdir bison#cd bison#mkdir patches
Create Makefile,
DESCR and PLIST (see
Chapter 7, Package components - files, directories and
contents) then continue with fetching the
distfile:
#make fetch>> bison-1.25.tar.gz doesn't seem to exist on this system. >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//. Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) ftp: Error retrieving file: 500 Internal error >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//. Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) ftp: Error retrieving file: 500 Internal error >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//. Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) Successfully retrieved file.
Generate the checksum of the distfile into distinfo:
#make makesum
Now compile:
#make>> Checksum OK for bison-1.25.tar.gz. ===> Extracting for bison-1.25 ===> Patching for bison-1.25 ===> Ignoring empty patch directory ===> Configuring for bison-1.25 creating cache ./config.cache checking for gcc... cc checking whether we are using GNU C... yes checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin checking how to run the C preprocessor... cc -E checking for minix/config.h... no checking for POSIXized ISC... no checking whether cross-compiling... no checking for ANSI C header files... yes checking for string.h... yes checking for stdlib.h... yes checking for memory.h... yes checking for working const... yes checking for working alloca.h... no checking for alloca... yes checking for strerror... yes updating cache ./config.cache creating ./config.status creating Makefile ===> Building for bison-1.25 cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g LR0.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g allocate.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g closure.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g conflicts.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g derives.c cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\" -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -g ./files.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getargs.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g gram.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lalr.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lex.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g main.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g nullable.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g output.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g print.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reader.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reduce.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g symtab.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g warshall.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g version.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt1.c cc -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o getargs.o gram.o lalr.o lex.o main.o nullable.o output.o print.o reader.o reduce.o symtab.o warshall.o version.o getopt.o getopt1.o ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp() rm -f bison.s1 sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
Everything seems OK, so install the files:
#make install>> Checksum OK for bison-1.25.tar.gz. ===> Installing for bison-1.25 sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share /usr/pkg/info /usr/pkg/man/man1 rm -f /usr/pkg/bin/bison cd /usr/pkg/share; rm -f bison.simple bison.hairy rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info* install -c -o bin -g bin -m 555 bison /usr/pkg/bin/bison /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy cd .; for f in bison.info*; do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1 ===> Registering installation for bison-1.25
You can now use bison, and also - if you decide so - remove it with pkg_delete bison. Should you decide that you want a binary package, do this now:
#make package>> Checksum OK for bison-1.25.tar.gz. ===> Building package for bison-1.25 Creating package bison-1.25.tgz Registering depends:. Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
Now that you don't need the source and object files any more, clean up:
#make clean===> Cleaning for bison-1.25
Table of Contents
#make===> Checking for vulnerabilities in figlet-2.2.1nb2 => figlet221.tar.gz doesn't seem to exist on this system. => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/. => [172219 bytes] Connected to ftp.plig.net. 220 ftp.plig.org NcFTPd Server (licensed copy) ready. 331 Guest login ok, send your complete e-mail address as password. 230-You are user #5 of 500 simultaneous users allowed. 230- 230- ___ _ _ _ 230- | _| |_ ___ ___| |_|___ ___ ___ ___ 230- | _| _| . |_| . | | | . |_| . | _| . | 230- |_| |_| | _|_| _|_|_|_ |_|___|_| |_ | 230- |_| |_| |___| |___| 230- 230-** Welcome to ftp.plig.org ** 230- 230-Please note that all transfers from this FTP site are logged. If you 230-do not like this, please disconnect now. 230- 230-This arhive is available via 230- 230-HTTP: http://ftp.plig.org/ 230-FTP: ftp://ftp.plig.org/ (max 500 connections) 230-RSYNC: rsync://ftp.plig.org/ (max 30 connections) 230- 230-Please email comments, bug reports and requests for packages to be 230-mirrored to ftp-admin@plig.org. 230- 230- 230 Logged in anonymously. Remote system type is UNIX. Using binary mode to transfer files. 200 Type okay. 250 "/pub" is new cwd. 250-"/pub/figlet" is new cwd. 250- 250-Welcome to the figlet archive at ftp.figlet.org 250- 250- ftp://ftp.figlet.org/pub/figlet/ 250- 250-The official FIGlet web page is: 250- http://www.figlet.org/ 250- 250-If you have questions, please mailto:info@figlet.org. If you want to 250-contribute a font or something else, you can email us. 250 250 "/pub/figlet/program" is new cwd. 250 "/pub/figlet/program/unix" is new cwd. local: figlet221.tar.gz remote: figlet221.tar.gz 502 Unimplemented command. 227 Entering Passive Mode (195,40,6,41,246,104) 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes). 38% |************** | 65800 64.16 KB/s 00:01 ETA 226 Transfer completed. 172219 bytes received in 00:02 (75.99 KB/s) 221 Goodbye. => Checksum OK for figlet221.tar.gz. ===> Extracting for figlet-2.2.1nb2 ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found ===> Patching for figlet-2.2.1nb2 ===> Applying pkgsrc patches for figlet-2.2.1nb2 ===> Overriding tools for figlet-2.2.1nb2 ===> Creating toolchain wrappers for figlet-2.2.1nb2 ===> Configuring for figlet-2.2.1nb2 ===> Building for figlet-2.2.1nb2 gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\" -DDEFAULTFONTFILE=\"standard.flf\" figlet.c zipio.c crc.c inflate.c -o figlet chmod a+x figlet gcc -O2 -o chkfont chkfont.c => Unwrapping files-to-be-installed.##make install===> Checking for vulnerabilities in figlet-2.2.1nb2 ===> Installing for figlet-2.2.1nb2 install -d -o root -g wheel -m 755 /usr/pkg/bin install -d -o root -g wheel -m 755 /usr/pkg/man/man6 mkdir -p /usr/pkg/share/figlet cp figlet /usr/pkg/bin cp chkfont /usr/pkg/bin chmod 555 figlist showfigfonts cp figlist /usr/pkg/bin cp showfigfonts /usr/pkg/bin cp fonts/*.flf /usr/pkg/share/figlet cp fonts/*.flc /usr/pkg/share/figlet cp figlet.6 /usr/pkg/man/man6 ===> Registering installation for figlet-2.2.1nb2#
Layout for precompiled binary packages on ftp.NetBSD.org:
/pub/NetBSD/packages/
distfiles/
# Unpacked pkgsrc trees
pkgsrc-current -> /pub/NetBSD/NetBSD-current/pkgsrc
pkgsrc-2003Q4 -> N/A
pkgsrc-2004Q1/pkgsrc
# pkgsrc archives
pkgsrc-current.tar.gz -> ../NetBSD-current/tar_files/pkgsrc.tar.gz
pkgsrc-2003Q4.tar.gz -> N/A
pkgsrc-2004Q1.tar.gz -> N/A
# Per pkgsrc-release/OS-release/arch package archives
pkgsrc-2003Q4/
NetBSD-1.6.2/
i386/
All/
archivers/
foo -> ../All/foo
...
pkgsrc-2004Q1/
NetBSD-1.6.2/
i386/
All/
...
NetBSD-2.0/
i386/
All/
...
SunOS-5.9/
sparc/
All/
...
x86/
All/
...
# Per os-release package archive convenience links
NetBSD-1.6.2 -> 1.6.2
1.6.2/
i386 -> ../pkgsrc-2004Q1/NetBSD-1.6.2/i386
m68k/
All/
archivers/
foo -> ../All/foo
...
amiga -> m68k
atari -> m68k
...
2.0 -> NetBSD-2.0 # backward compat, historic
NetBSD-2.0/
i386 -> ../pkgsrc-2004Q1/NetBSD-2.0/i386
SunOS-5.9/
sparc -> ../pkgsrc-2004Q1/SunOS-5.9/sparc
x86 -> ../pkgsrc-2004Q1/SunOS-5.9/x86
To create:
-
Run bulk build, see Section 5.3, “Doing a bulk build of all packages”
-
Upload /usr/pkgsrc/packages to
ftp://ftp.NetBSD.org/pub/NetBSD/packages/\ pkgsrc-2004Q4/\ # pkgsrc-branch `uname -s`-`uname -r`/ # OS & version `uname -p` # architecture -
If necessary, create a symlink ln -s `uname -m` `uname -p` (amiga -> m68k, ...)
Table of Contents
This section contains information on editing the pkgsrc guide itself.
The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several files
are created from it:
-
pkgsrc/doc/pkgsrc.txt, which replacespkgsrc/Packages.txt -
pkgsrc/doc/pkgsrc.html -
http://www.NetBSD.org/Documentation/pkgsrc/: the documentation on the NetBSD website will be built from pkgsrc and kept up to date on the web server itself. This means you must make sure that your changes haven't broken the build! -
http://www.NetBSD.org/Documentation/pkgsrc/pkgsrc.pdf: PDF version of the pkgsrc guide. -
http://www.NetBSD.org/Documentation/pkgsrc/pkgsrc.ps: PostScript version of the pkgsrc guide.
The procedure to edit the pkgsrc guide is:
-
Make sure you have the packages needed to re-generate the pkgsrc guide (and other XML-based NetBSD documentation) installed. These are “netbsd-doc” for creating the ASCII- and HTML-version, and “netbsd-doc-print”for the PostScript- and PDF version. You will need both packages installed, to make sure documentation is consistent across all formats. The packages can be found in
pkgsrc/meta-pkgs/netbsd-docandpkgsrc/meta-pkgs/netbsd-doc-print. -
Edit the XML file(s) in
pkgsrc/doc/guide/files. -
Run make extract && make do-lint in
pkgsrc/doc/guideto check the XML syntax, and fix it if needed. -
Run make in
pkgsrc/doc/guideto build the HTML and ASCII version. -
If all is well, run make install-doc to put the generated files into
pkgsrc/doc. -
cvs commit pkgsrc/doc/guide/files
-
cvs commit -m re-generate pkgsrc/doc/pkgsrc.{html,txt}
-
Until the webserver on www.NetBSD.org is really updated automatically to pick up changes to the pkgsrc guide automatically, also run make install-htdoc HTDOCSDIR=../../../htdocs (or similar, adjust
HTDOCSDIR!). -
cvs commit htdocs/Documentation/pkgsrc