Update the CONFLICTS definitions of ports in the following categories:
- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters
An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.
There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.
Approved by: portmgr (implicit)
- Bump PORTREVISION
- archivers/peazip update to 8.4.0
- editors/cudatext update to 1.155.3
- russian/emkatic update to 0.41
- x11-toolkits/qt5pas to latest version included into lazarus 2.2.0
ChangeLog at: https://wiki.lazarus.freepascal.org/Lazarus_2.2.0_release_notes
Jan 2022 - 1.8.7
- Bugfix: Removed the hamlib test from the KLog start that was causing big delays.
- Bugfix: Serial speed was not saved to config file.
- Bugfix: eQSL Uploads problem solved (Closes#406).
- Bugfix: Connection to the radios were not being done properly (Closes#407) (Closes#379).
- Bugfix: SplitCheckBox was checked when coming from Setup (Closes#377).
- Bugfix: Entering a QRZ cleared the DX Gridsquare if it was previously entered (Closes#357).
- Bugfix: Imported QSOs add the default electronic QSL send info if configured.
- Bugfix: DXCC widget shows last Entity status after modifying a QSO (Closes#412).
- Bugfix: Hamlib is now stopped while editing a QSO (Closes#414).
- Bugfix: Hamlib on serial devices works ok. (Closes#355).
- Bugfix: RST is not changed on mode change when editing. (Closes#423).
- New feature: Added a Manual Mode checkbox to disable quickly hamlib & wsjtx integration.
- New feature: Added "Save" and "Cancel" button when editing a recorded QSO.
- Update: Developers mailing list address changed to klog@groups.io (Closes#421).
Reported by: portscout
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:
PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2
Reviewed by: diizzy, kde
Tested by: kai, rhurlin, arrowd, madpilot
Approved by: makc, tcberner, kde
Differential Revision: https://reviews.freebsd.org/D33237
Exp-run by: antoine
Legend:
# info
+ new feature
- bugfix
--------------------
2.5.0 (2021-01-16)
+ 3 user defined buttons for TRX control (Saku, OH1KH)
+ TX quick split using XIT (Saku, OH1KH)
+ support of WPM changes from macros when using Hamlib keyer (Saku, OH1KH)
+ include operator's callsign in the exports (Florian, DF2ET)
+ view eQSL image from list of QSO (Saku, OH1KH)
+ button to show remote station on a map with path and direction (Florian, DF2ET)
+ buttons for adding Mode+RST_sent, Locators_propagation and user defined message to DX spot sending (Saku, OH1KH)
+ ADIF import for JS8, FT4 and PKT (Andreas, DL7OAP)
+ local oscilator configuration added (Florian, DF2ET)
+ user can spot RX freq instead of TX (Florian, DF2ET)
+ export to EDI (Florian, DF2ET)
+ separate CW keyer settings for radio1 and radio2 (Saku, OH1KH)
+ rotor controls updated (Saku, OH1KH)
+ contest filter added (Florian, DF2ET)
+ working with WSJT improved
+ Cabrillo export headers (Saku, OH1KH & Florian, DF2ET)
+ DARK DOK info support added (Florian, DF2ET & Andreas, DL7OAP)
+ Cabrillo export added (Florian, DF2ET)
+ DX cluster improved (Saku, OH1KH)
+ Add option to upload SAT status info to AMSAT status page (Florian, DF2ET)
+ Calculate SAT mode from freq and RX freq. Used in eqsl.cc upload and ADIF/HTML exports (Florian, DF2ET)
- fixes for club membership (Saku, OH1KH & Andreas, DL7OAP)
- fixes for password special characters (Saku, OH1KH)
- fixes to ADIF export rules (Andreas, DL7OAP)
- fixes to contest window (Saku, OH1KH)
- band <->frequency fixes (Saku, OH1KH)
- UTF-8 problems in ADIF (Saku, OH1KH)
- JTDX & JS8CALL fixes (Saku, OH1KH)
- typo in satellite EO-80 (Andreas, DL7OAP)
- layout fixes for QT5 compilation (Saku, OH1KH)
- filter to take fix (Saku, OH1KH)
- eQSL upload fixes (Saku, OH1KH)
- CQ monitor fixes (Saku, OH1KH)
- CW keys fixes (Saku, OH1KH)
- RBN monitor fixes (Saku, OH1KH)
- new membership files check fixed
- export to HTML and ADIF fixes (Saku, OH1KH)
- group edit fixes (Saku, OH1KH)
- filter settings fixes (Saku, OH1KH)
- QTH profile fixes (Saku, OH1KH)
- callbook database update fixes (Saku, OH1KH)
PR: ports/260066
Reported by: hellocodebsd@gmail.com
Abandonware, last release in 2003. Please consider using scp or
net/croc instead
Using zmodem protocol to transfer files isn't good practice in
2022 and there are good alternatives.
PR: 260718
0.3.4 / 2022-01-22 Fabian Kurz <fabian@fkurz.net>
* Updated Makefile for OS X (tnx David Winarsky, Jon Nall)
* Accept - for / (easier for keyboard layouts where
/ requires pressing shift - tnx DF4TS)
* F8 toggles between complete toplist or only user's own
attempts.
* Add KG7IEL's patches from (Debian #997190)
* Add word lists from Tom Mozdzen
* Handle long words better (up to 28 characters - tnx SQ6JNX)
* Add characters: . , = ? (tnx W4MSL)
Reported by: portscout
Jan 2022 - 1.8.6
Bugfix: Net rig & FLRig hamlib connections were not working propertly. (Closes#339) (TNX W5PNY)
Bugfix: Some prefixes were not properly detected. (Closes#371) (Closes#367).
Bugfix: Serial Hamlib rigs were not properly working. (TNX W5PNY)
Bugfix: QRZ.com was disabled if user was not subscribed. (TNX EA5WA)
Bugfix: QRZ.com data was not updated if the boxes were already filled. (TNX EA5WA)
Bugfix: Callsigns formet were not always properly checked.
Improvement: Hamlib 4.4 in binary packages (macOS & Windows) tested also in Linux.
Improvement: RTS & DTR are defined to OFF by default in hamlib.
Improvement:KLog differenciates QRZ.com subcribed users from non subscribed. (TNX EA5WA)
Reported by: portscout
- Some patches not needed now due to adrian@ patches sent upstream.
- Additional changes by @takefu
The distribution tarball uses patch applied to the following master branch because the build is broken.
baea7e8c9a (diff-9df9e2c313e694cf242534e90c1187fe119fac8de7c304ae438de0736209953b.patch)
The error message in build is as follows.
hamlibpy_wrap.c:48824:80: error: use of undeclared identifier 'RIG_FUNCTION_SEND_VOICE_MEM'; did you mean 'RIG_FUNCTION_SEND_MORSE'?
SWIG_Python_SetConstant(d, "RIG_FUNCTION_SEND_VOICE_MEM",SWIG_From_int((int)(RIG_FUNCTION_SEND_VOICE_MEM)));
For a complete log of changes to Hamlib, please visit:
http://sourceforge.net/p/hamlib/code/commit_browser
Major changes in 4.0 affecting usage
Most rig model numbers have changed
RIG_LEVEL_VOX has been deprecated and replaced by RIG_LEVEL_VOXDELAY
rigctl 'f' command now returns VFO argument too
rigctl 'y' and 'Y' command now take/show antenna argument and option.
range_list items are undergoing changes towards a different model TBD
RTS/DTR PTT sharing is off by default now -- use serial_share=1 option to
enable
PR: ports/261105
Reported by: takefu@airport.gm
- Some patches not needed now due to adrian@ patches sent upstream.
- Additional changes by @takefu added RIG_FUNC_SEND_VOICE_MEM from git
For a complete log of changes to Hamlib, please visit:
http://sourceforge.net/p/hamlib/code/commit_browser
Major changes in 4.0 affecting usage
Most rig model numbers have changed
RIG_LEVEL_VOX has been deprecated and replaced by RIG_LEVEL_VOXDELAY
rigctl 'f' command now returns VFO argument too
rigctl 'y' and 'Y' command now take/show antenna argument and option.
range_list items are undergoing changes towards a different model TBD
RTS/DTR PTT sharing is off by default now -- use serial_share=1 option to
enable
PR: ports/261105
Reported by: takefu@airport.gm
- Fixed FreeBSD specifc Sysctl.py code so it will no longer core
if no USB device plugged in
- changed delay in NanoVNA__V2.py since too fast for some devices
see https://github.com/NanoVNA-Saver/nanovna-saver/issues/441
Changelog
=========
v0.3.10
------
- Default Band ranges for 5 and 9cm
- Layout should fit on smaller screens
- Fixed fixed axis settings
- Show VNA type in port selector
- Recognise tinySA (screenshot only)
- Some more cables in TDR
- Reference plane applied after calibration
- Calibration fixes by DiSlord
v0.3.9
------
- TX Power on V2
- New analysis
- Magnitude Z Chart
- VSWR Chart improvements
Reported by: portscout
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).
A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.
These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,
Approved by: portmgr (implicit)
Release: WSJT-X 2.5.4
Dec 28, 2021
----------------------
This is mostly a bug fix release. It has the following changes since
release 2.5.3:
WSJTX:
- Repair a defect that caused occasional crashes when in QSO with
stations using nonstandard callsigns.
Reported by: @portscout
- Removed guile as it is not needed
(From CHANGELOG.md)
All notable changes to GNU Radio will be documented in this file.
The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html),
starting with version 3.7.12.0.
Older Logs can be found in `docs/RELEASE-NOTES-*`.
API is compatible with C++ code written against previous v3.8 releases.
ABI (link time) compatibility is not guaranteed. Out-of-tree C++ code
linked to previous v3.8 releases should be rebuilt against this version.
- Fix drag and drop issue with Quartz
- Fix desync when dragging block
- Update disabled blocks if they depend on others
- Allow short and byte as valid types in an enum
- Fix evaluation of interdependent variables
- Set VERSION_PATH to 0 in new modules, instead of using GIT rev
- For Python3, return correct exeption ModuleNotFoundError instead of ImportError
- New Matrix Interleaver block
- Fix "hide" expressions in yml files
- Remove unused msg output port from Chunks To Symbols block yml
- Add "shift" parameter to Log Power FFT
- Fix: tags on the last sample were not shown
- Fix: U and V channels were reversed on sink blocks
At LEAST the following authors contributed to this release.
- Adrien Michel <adriengit@users.noreply.github.com>
- David Winter <david.winter@analog.com>
- Emmanuel Blot <emmanuel.blot@free.fr>
- Håkon Vågsether <hauk142@gmail.com>
- Jared Dulmage <jared.dulmage@caliola.com>
- Jason Uher <jason.uher@jhuapl.edu>
- Jeff Long <willcode4@gmail.com>
- Marc L <marcll@vt.edu>
- Marcus Müller <mmueller@gnuradio.org>
- Martin Braun <martin@gnuradio.org>
- Ron Economos <w6rz@comcast.net>
- Volker Schroer
From [1]
What's this?
This is a set of git repositories based on the last public
commits available for Qt 5.15 branches with a curated collection
of patches on top to ensure open source products can be used
comfortably until users transition to their Qt 6-based ports.
Which patches does it include?
This collection of patches includes patches that fix at least
one of the following:
* Security issues
* Crashes
* Functional defects
We only include patches that have been approved upstream in the
Qt project. If a patch cannot be merged upstream for technical
reasons (e.g. the class no longer exists), it can also be
merged.
The patches to merge will be decided based on their relevance
towards Open Source products and their viability.
PR: 260548
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D33446
[1] https://community.kde.org/Qt5PatchCollection
- Repair a longstanding regression that caused signal reports from
tail-ended Tx2 messages to be omitted from logged information
- Parse "dx-call-1 RR73; dx-call-2 <de-call> +nn" messages (i3=0,
n3=1 DXpedition mode) in regular 77-bit modes
- Repair a regression associated with setting the main window width
on program startup.
- Repair a problem with Q65 decodes of type 'q3' for messages of the
form "<Call_1> Call_2"
- Execute code associated with Q65 decodes of type 'q5' only when the
Max Drift control is set to 50. This fix prevents
double-incrementing of the message averaging counter on the first
decoding sequence.
- Polarization offset 'Dpol' from the astronomical data window is now
written to file azel.dat if environment variable
WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is
especially useful for EME on the higher microwave bands.
- The Auto Log QSO option in "Settings->Reporting" now behaves the
same as the Prompt to log QSO option when not in a special
operating context mode.
- The Fast/Normal/Deep setting in Q65 mode is now a sticky setting
and is no longer reset to Fast on program startup or when Settings
has been opened. The user selection is used for automatic decodes,
but Deep is used for any subsequent manual decode attempts.
- New hamlib code to correct minor flaws in controlling several rigs.
- Update the Chinese and Hong Kong translations of the user
interface.
PR: ports/260618
Reported by: hellocodebsd@gmail.com
Major changes:
* Added noise stats, autolevel, and squelch (#1763)
* Added automatic file format detection from filename
* Added support for SmartFire Proflame 2 remote control (#1905)
* Added support for Lacrosse TX34 rain gauge (#1890)
* Added support for Telldus-FT0385R (#1841)
* Added support for GE Choice Alert wireless alarm sensors (#1768)
* Added support for Porsche Boxter/Cayman TPMS
* Added support for Funkbus/Instafunk (#1896)
* Added support for Truck TPMS (#1893)
* Added support for LaCrosse LTV-W1 wind sensor (#1855)
* Added support for Auriol 4-LD5661 temperature/rain sensor (#1843)
* Added support for Linear Megacode Remote (#1834)
* Added support for EnOcean ERP1 decoder (#1829)
* Added support for Acurite-01185M (#1824)
* Added support for ATech-WS308 temperature sensor (#1605)
* Added support for RainPoint sensor (#1781)
* Added support for Inkbird ITH-20R
* Added support for Clipsal CMR112 cent-a-meter power meter (#1814)
* Added support for Govee Water Leak Detector H5054 and Govee Contact Sensor B5023 (#1653)
* Added support for Markisol curtain remote (#1775)
* Added support for Oregon Scientific BTHR918 (#1767)
* Added UV index add decimals to Bresser-7in1 (#1789)
* Changed InfluxDB output of 'mic' from field to tag (#1773)
* Added biastee, digital_agc, direct_samp, offset_tune option for rtlsdr and rtl_tcp (#1788)
* Added QoS to MQTT option
Full changelog: https://github.com/merbanan/rtl_433/releases/tag/21.12
ChangeLog: https://github.com/Xastir/Xastir/releases/tag/Release-2.1.8
While here:
* Remove gettext and python from USES. The port doesn't used them anymore.
* Remove comment
* Move patch to .am file instead of generated .in file
* Remove sparc64 patch (architecture is UNSUPPORTED in 13 and above)
* Add USES=autoreconf
This last item allows us to bypass bootstrap.sh. The language preprocessing is
already done in the config directory so there is no need to do it as a bootstrap
step.
PR: 259669
Reported by: russo@bogodyn.org (xastir developer)
Approved by: carl@stagecraft.cx (maintainer, timeout > 1 month)
The pyserial distribution includes a handy tcp/serial port bridge
script called tcp_serial_redirect.py. Add an EXAMPLES option to
install this (along with other pyserial example scripts).
PR: 260328
Approved by: sbz (maintainer timeout, 18 days)
There has been multiple consecutive maintainer timeouts for the ports
maintained by Nicole Reid <root@cooltrainer.org>. We thank Nicole for
all their efforts and hope to welcome them back in the future.
PR: 260036
- Really update to 1.6 this time. Changes involved new buld system.
- Corrected non functioning SED
- petted portlint
- Rather than trying to keep a bunch of different platform specific Makefiles in sync, "cmake" is now used for greater portability and easier maintenance.
- README.md has a quick summary of the process. More details in the ***User Guide***.
- "-X" option enables FX.25 transmission. FX.25 reception is always enabled so you don't need to do anything special. "What is FX.25?" you might ask. It is forward error correction (FEC) added in a way that is completely compatible with an ordinary AX.25 frame. See new document ***AX25\_plus\_FEC\_equals\_FX25.pdf*** for details.
- Receive AIS location data from ships. Enable by using "-B AIS" command line option or "MODEM AIS" in the configuration file. AIS NMEA sentences are encapsulated in APRS user-defined data with a "{DA" prefix. This uses 9600 bps so you need to use wide band audio, not what comes out of the speaker. There is also a "-A" option to generate APRS Object Reports.
- Receive Emergency Alert System (EAS) Specific Area Message Encoding (SAME). Enable by using "-B EAS" command line option or "MODEM EAS" in the configuration file. EAS SAME messages are encapsulated in APRS user-defined data with a "{DE" prefix. This uses low speed AFSK so speaker output is fine.
- "-t" option now accepts more values to accommodate inconsistent handling of text color control codes by different terminal emulators. The default, 1, should work with most modern terminal types. If the colors are not right, try "-t 9" to see the result of the different choices and pick the best one. If none of them look right, file a bug report and specify: operating system version (e.g. Raspbian Buster), terminal emulator type and version (e.g. LXTerminal 0.3.2). Include a screen capture.
- "-g" option to force G3RUH mode for lower speeds where a different modem type may be the default.
- 2400 bps compatibility with MFJ-2400. See ***2400-4800-PSK-for-APRS-Packet-Radio.pdf*** for details
- "atest -h" will display the frame in hexadecimal for closer inspection.
- Add support for Multi-GNSS NMEA sentences.
PR: ports/260483
Reported by: hellocodebsd@gmail.com
