value of X11_TYPE here since it's defined in bsd.buildlink3.mk which is
included before this check. This fixes breakage for packages that set
USE_X11 due to USE_PKGSRC_XFREE86 not being defined before it's used.
add 'pthread' to BUILDLINK_PACKAGES so that
BUILDLINK_{{LD,C}FLAGS,LDADD}.pthread actually have an effect.
This should fix the build of at least tcl/tk related packages now
that tcl and tk packages are thread-aware.
Remove comments about linking native pthread libraries and headers into
${BUILDLINK_DIR} as this does not happen.
usage of perl's int() causes trouble with perl 5.8.3 (5.8*?) on at least
NetBSD sparc64/1.6.2.
The perl script openssl-0.9.6m/crypto/bn/bn_prime.pl uses the perl
function int() to truncate the return of sqrt() function.
On the above mentioned platform this leads to execution error:
...
/usr/pkg/bin/perl bn_prime.pl >bn_prime.h
Illegal modulus zero at bn_prime.pl line 16.
Tracing the problem I've found that this int() usage may be the key
of the problem. Please note the following:
$ uname -srm; perl -v | grep 'This is perl'; perl -e 'print int(sqrt(3)),"\n"'
NetBSD 1.6.2 sparc64
This is perl, v5.8.3 built for sparc64-netbsd
2
And...
$ uname -srm; perl -v | grep 'This is perl'; perl -e 'print int(sqrt(3)),"\n"'
NetBSD 1.6.2 sparc64
This is perl, v5.6.1 built for sparc64-netbsd
1
Also note that perlfunc(3) warns about int() used for rounding and
recommends to use sprintf, printf, POSIX::floor or POSIX::ceil when
applicable.
My workaround is to use POSIX::floor() instead of int().
Sqsh (pronounced skwish) is short for SQshelL (pronounced s-q-shell), it
is intended as a replacement for the venerable 'isql' program supplied
by Sybase. It came about due to years of frustration of trying to do
real work with a program that was never meant to perform real work.
Sqsh is much more than a nice prompt, it is intended to provide much of
the functionality provided by a good shell, such as variables,
redirection, pipes, back-grounding, job control, history, command
completion, and dynamic configuration. Also, as a by-product of the
design, it is remarkably easy to extend and add functionality.
This package enables motif support.
Sqsh (pronounced skwish) is short for SQshelL (pronounced s-q-shell), it
is intended as a replacement for the venerable 'isql' program supplied
by Sybase. It came about due to years of frustration of trying to do
real work with a program that was never meant to perform real work.
Sqsh is much more than a nice prompt, it is intended to provide much of
the functionality provided by a good shell, such as variables,
redirection, pipes, back-grounding, job control, history, command
completion, and dynamic configuration. Also, as a by-product of the
design, it is remarkably easy to extend and add functionality.
This package enables motif support.
Better support /who and /whereis.
Divert server messages to the server window instead of the channel window.
Bump PKGREVISION to 8.
Compile-tested only.
VideoLAN is a project of French students from the Ecole
Centrale Paris and developers from all over the world. Its main
goals is MPEG streaming on a network, but it also features a
standalone multimedia player. The VideoLAN Server can stream
video read from a hard disk, a DVD player, a satellite card or
an MPEG 2 compression card, and unicast or multicast it on a
network. The VideoLAN Client can read the stream from the
network and display it. It can also be used to display video
read locally on the computer : DVDs, VCDs, MPEG and DivX files
and from a satellite card. It is multi-plaform : Linux,
Windows, Mac OS X, BeOS, BSD, Solaris, QNX, iPaq... The
VideoLAN Client and Server now have a full IPv6 support.
VideoLAN is a project of French students from the Ecole
Centrale Paris and developers from all over the world. Its main
goals is MPEG streaming on a network, but it also features a
standalone multimedia player. The VideoLAN Server can stream
video read from a hard disk, a DVD player, a satellite card or
an MPEG 2 compression card, and unicast or multicast it on a
network. The VideoLAN Client can read the stream from the
network and display it. It can also be used to display video
read locally on the computer : DVDs, VCDs, MPEG and DivX files
and from a satellite card. It is multi-plaform : Linux,
Windows, Mac OS X, BeOS, BSD, Solaris, QNX, iPaq... The
VideoLAN Client and Server now have a full IPv6 support.
sybperl includes four modules: Sybase::DBlib, Sybase::CTlib,
Sybase::BCP and Sybase::Sybperl. The first two implement a thin
wrapper around the Sybase DB-Library and Client Library APIs,
respectively. Sybase::BCP is a specialty module aimed at doing
Bulk-Copy operations, and Sybase::Sybperl is a compatibility module
with sybperl 1.xx (i.e. with the perl 4.x version).
The sybperl modules are thin wrappers around the Sybase APIs. This is
both good and bad. It's good because you have greater control, and
because the API is (obviously) close to the way the server and the
protocol work. It's bad in that it's a proprietary API, and that it is
somewhat verbose.
Sqsh (pronounced skwish) is short for SQshelL (pronounced s-q-shell), it
is intended as a replacement for the venerable 'isql' program supplied
by Sybase. It came about due to years of frustration of trying to do
real work with a program that was never meant to perform real work.
Sqsh is much more than a nice prompt, it is intended to provide much of
the functionality provided by a good shell, such as variables,
redirection, pipes, back-grounding, job control, history, command
completion, and dynamic configuration. Also, as a by-product of the
design, it is remarkably easy to extend and add functionality.
This package enables X11 support.
Sqsh (pronounced skwish) is short for SQshelL (pronounced s-q-shell), it
is intended as a replacement for the venerable 'isql' program supplied
by Sybase. It came about due to years of frustration of trying to do
real work with a program that was never meant to perform real work.
Sqsh is much more than a nice prompt, it is intended to provide much of
the functionality provided by a good shell, such as variables,
redirection, pipes, back-grounding, job control, history, command
completion, and dynamic configuration. Also, as a by-product of the
design, it is remarkably easy to extend and add functionality.
This package enables X11 support.
Many changes were made from previous packaged version, 0.6.3; Lots of
improvements and bug fixes, including security ones. Please take a look
at its WWW page for more detailes.
http://www.shiro.dreamhost.com/scheme/gauche/
pkgsrc changes:
- support buildlink2. buildlink3.mk is also added but not tested since
I have not moved to buildlink3 environment yet.
- this package now uses libgcudevel/boehm-gc instead of self contained,
slightly modified one. It seems that this package runs under m68k.
** Bug fixes
mv could mistakenly fail to preserve hard links when moving two
or more arguments between partitions.
`cp --sparse=always F /dev/hdx' no longer tries to use lseek to create
holes in the destination.
nohup now sets the close-on-exec flag for its copy of the stderr file
descriptor. This avoids some nohup-induced hangs. For example, before
this change, if you ran `ssh localhost', then `nohup sleep 600 </dev/null &',
and then exited that remote shell, the ssh session would hang until the
10-minute sleep terminated. With the fixed nohup, the ssh session
terminates immediately.
`expr' now conforms to POSIX better:
Integers like -0 and 00 are now treated as zero.
The `|' operator now returns 0, not its first argument, if both
arguments are null or zero. E.g., `expr "" \| ""' now returns 0,
not the empty string.
The `|' and `&' operators now use short-circuit evaluation, e.g.,
`expr 1 \| 1 / 0' no longer reports a division by zero.
** New features
`chown user.group file' now has its traditional meaning even when
conforming to POSIX 1003.1-2001, so long as no user has a name
containing `.' that happens to equal `user.group'.
From the changelog:
* Add an error handler for the case where a POP3 server returns a message
that isn't even close to valid 822 format, particularly one where the
first line in the message header is a continuation line (starts with
whitespace).
Unfortunately, Ruby has problem with thread library even if recent
release of 1.8.1. So, a program using ruby's library shouldn't link
with thread library.
Bump PKGREVISION.
been set to if it hadn't been overridden by PKG_SYSCONFDIR.<pkg>. This
can be used in /etc/mk.conf to re-override certain PKG_SYSCONFDIR.<pkg>
in /etc/mk.conf from various package Makefiles, e.g.
PKG_SYSCONFDIR.openssl= ${DFLT_PKG_SYSCONFDIR}
PKG_SYSCONFDIR.tcp_wrappers= ${DFLT_PKG_SYSCONFDIR}
pkgsrc changes:
o provide GKRELLM_DEBUG to easily build a debug version (should help with
the spinning gkrellm issue)
o don't strip binaries in debug mode
o small gkrellm Makefiles fixes
GKrellM changes (from Changelog):
o Stephan Kapfinger <s.kapfinger--at--gmx.de> mail.c patch fixes bug
I introduced into the last release where parsing of the mail reader
command could fail.
