kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/net-mgmt/Makefile

312 lines
7.6 KiB
Makefile
Raw Normal View History

Add the net-mgmt category, but do not connect it to the build until it has some ports.
2004-02-04 06:14:43 +01:00
# $FreeBSD$
#
Remove category pkg/COMMENT files in favour of a COMMENT variable in the category makefile. Submitted by: Matthew Seaman <m.seaman@infracaninophile.co.uk> PR: 59651
2004-04-02 09:29:48 +02:00
COMMENT = Network management tools
2ping is a bi-directional ping utility. It uses 3-way pings (akin to TCP SYN, SYN/ACK, ACK) and after-the-fact state comparison between a 2ping listener and a 2ping client to determine which direction packet loss occurs. WWW: http://www.finnie.org/software/2ping/ PR: ports/152528 Submitted by: Gea-Suan Lin <gslin at gslin.org>
2010-11-24 06:21:18 +01:00
SUBDIR += 2ping
add TkTopNetFlows 0.4 GUI tool for NetFlow data visualisation PR: 65542 Submitted by: Viktor Fomichev <vfom@narod.ru>
2004-04-15 03:59:31 +02:00
SUBDIR += TkTopNetFlows
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += aggregate
Add aircrack-ng 0.5, aircrack-ng is the next generation of aircrack. PR: ports/97922 Submitted by: Lars Engels <lars.engels@0x20.net>
2006-05-27 09:31:26 +02:00
SUBDIR += aircrack-ng
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += airport
SUBDIR += angst
- readded net-mgmt/ap-utils to the build
2008-06-01 16:23:23 +02:00
SUBDIR += ap-utils
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += argus
This port builds the Argus clients, which used to be bundled with the Argus daemon, until release 2.0.6 of Argus.
2004-05-17 23:16:48 +02:00
SUBDIR += argus-clients
* Argus is a system and network monitoring application. * It will monitor nearly anything you ask it to monitor (TCP + UDP applications, IP connectivity, SNMP OIDS, Programs, Databases, etc). * It presents a nice clean, easy to view web interface that will keep both the managers happy (Red Bad. Green Good.) and the techs happy ("Ah! that's what the problem is"). * It can send alerts numerous ways (such as via pager) and can automatically escalate if someone falls asleep. WWW: http://argus.tcp4me.com/ PR: ports/105837 Submitted by: Brock Williams <brock@gringo.cotcomsol.com>
2006-12-01 17:02:07 +01:00
SUBDIR += argus-monitor
Create new port for version 3 of the argus network audit server. Version 2.0.6 will be kept as net-mgmt/argus as long as there is sufficient interest.
2008-04-20 19:24:09 +02:00
SUBDIR += argus3
Create new port for version 3 of the argus client utilities. The utilities for argus version 2 are not compatible and the old port will be kept as long as there is interest.
2008-04-20 19:33:41 +02:00
SUBDIR += argus3-clients
add arpalert-1.1.0 Arpalert uses ARP protocol monitoring to prevent unauthorized connections on the local network. If an illegal connection is detected, a program or script is launched, which could be used to send an alert message, for example. WWW: http://www.arpalert.org/
2006-10-06 05:46:09 +02:00
SUBDIR += arpalert
Add arpscan-0.2, arpscan is a very simple scanner which sends out arp requests for the given IP addresses and displays a list of the found hosts. PR: ports/64605 Submitted by: David Yeske <dyeske@yahoo.com>
2004-03-23 09:49:46 +01:00
SUBDIR += arpscan
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += arpwatch
SUBDIR += arts++
SUBDIR += aspathtree
SUBDIR += bandwidthd
SUBDIR += bgpq
This program is a lightweight access- and prefix-list generator for Cisco routers and GateD/Zebra. Access lists are generated based on RADB/RIPE data. WWW: http://snar.spb.ru/prog/bgpq3/ PR: ports/140021 Submitted by: Alexandre Snarskii <snar at snar.spb.ru>
2009-11-20 19:47:35 +01:00
SUBDIR += bgpq3
Big Sister is a flexible network and system monitor with SNMP integration and a web interface.
2004-03-25 08:15:30 +01:00
SUBDIR += bigsister
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += bpft
SUBDIR += braa
SUBDIR += bsd-airtools
bsnmp-jails is a module for bsnmpd which allows you to measure statistics about jails on your system. Counters are available for network traffic, CPU time used, process and thread counts, and disk utilization. LICENSE: BSD WWW: http://memberwebs.com/stef/software/bsnmp-jails/
2009-12-12 13:35:05 +01:00
SUBDIR += bsnmp-jails
bsnmp-regex is a module for bsnmpd which allows creation of counters from log files, program output or other text data. The counters use regular expressions to count the number of matches, or parse out specific text/numbers. The resulting data can then be queried or graphed with the usual SNMP tools. PR: ports/109103 Submitted by: brock at cotcomsol.com
2007-02-18 16:21:55 +01:00
SUBDIR += bsnmp-regex
bsnmp-ucd is a module for bsnmpd which allows to get memory, load average, cpu utilization and other system statistics. It implements parts of UCD-SNMP-MIB for this. It is also possible to specify your own commands under UCD-SNMP-MIB::extTable mib. PR: ports/120238 Submitted by: Mikolaj Golub <to.my.trociny (at) gmail.com>
2008-03-04 10:08:50 +01:00
SUBDIR += bsnmp-ucd
Add port net-mgmt/bsnmptools: Snmp client-side tools WWW: http://wiki.freebsd.org/BsnmpTools Author: Shteryana Shopova <soc-shteryana@freebsd.org>
2006-08-27 21:31:55 +02:00
SUBDIR += bsnmptools
- Add bwm-ng: Bandwidth Monitor NG is a small and simple console-based live bandwidth monitor for Linux, BSD, Solaris, Mac OS X and others. Short list of features: * supports /proc/net/dev, netstat, getifaddr, sysctl, kstat and libstatgrab * unlimited number of interfaces supported * interfaces are added or removed dynamically from list * white-/blacklist of interfaces * output of KB/s, Kb/s, packets, errors, average, max and total sum * output in curses, plain console, CSV or HTML * configfile WWW: http://www.gropp.org/
2006-02-20 13:45:03 +01:00
SUBDIR += bwm-ng
- Move net/cacti to net-mgmt category - Fix format of previous line in MOVED (pointyhat to pav) PR: ports/113495 Submitted by: edwin
2007-06-18 13:09:46 +02:00
SUBDIR += cacti
- Add cacti-spine formely know as (cacti-)cactid - Move it to net-mgmt to follow cacti - Drop maintenership Repocopy done by: marcus
2008-01-27 21:20:29 +01:00
SUBDIR += cacti-spine
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += cdpd
SUBDIR += cdpr
SUBDIR += cflowd
Add new port net-mgmt/check_logfiles Nagios plugin which scans log files for specific patterns. This plugin looks for patterns in files. It is capable of detecting logfile rotation. If you tell it how the rotated archives look like, it will also examine these files. Traditional logfile plugins were not aware of the gap which could occur, so under some circumstances they ignored what had happened between their checks. In a production environment this is not tolerable, that's why check_logfiles came into being. WWW: http://labs.consol.de/lang/en/nagios/check_logfiles/
2011-04-28 23:59:12 +02:00
SUBDIR += check_logfiles
check_multi is kind of a wrapper plugin which takes benefit of the Nagios 3.x capability to display multiple lines of plugin output. It calls multiple child plugins and displays their output in the long_plugin_output. A summary is given in the standard plugin output. The child return code with the highest severity becomes the parent (check_multi) plugin return code. The configuration is very simple: a NRPE-stylish config file contains a tag for each child plugin and then the check command line. check_multi can cover complex Business Process Views - using a builtin state evaluation mechanism. The second benefit is cluster monitoring with no need for extra services. All you need is provided by check_multi. LICENSE: GPL2 or later WWW: http://www.my-plugin.de/wiki/projects/check_multi/start
2009-03-18 07:21:13 +01:00
SUBDIR += check_multi
a plugin to check various parameters of a MySQL database WWW: http://labs.consol.de/lang/en/nagios/check_mysql_health/
2010-11-08 17:57:58 +01:00
SUBDIR += check_mysql_health
- Add net-mgmt/check_snmp_pkgvuln check_snmp_pkgvuln is a Nagios plugin that detects hosts that are running vulnerable ports based on the database of security vulnerabilities provided by portaudit. The plugin communicates with the host via SNMP using the HOST-RESOURCES-MIB::hrSWInstalledName MIB. WWW: http://www.cultdeadsheep.org/~clement/ Approved by: clement (mentor)
2005-12-05 22:34:11 +01:00
SUBDIR += check_snmp_pkgvuln
New port: net-mgmt/chillispot Chillispot is used for authenticating users of a wireless LAN. It support WPA (Wireless Protected Access) encryption. Authentication, authorization and accounting (AAA) is handled by your favorite radius server. PR: ports/90397 Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
2005-12-20 21:41:17 +01:00
SUBDIR += chillispot
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += choparp
SUBDIR += cidr
Circe is a captive portal system. It is built using Perl and is a program that allows you to monitor and control who has access between two networks. WWW: http://bws.berkeley.edu/ PR: ports/155485 Submitted by: Kevin Norman <circe-port-maintainers@bws.Net.berkeley.edu>
2011-03-15 20:26:26 +01:00
SUBDIR += circe
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += cisco_conf
SUBDIR += ciscoconf
SUBDIR += clog
collectd is a small daemon written in C for performance. It reads various system & network statistics along with updating output RRD or CSV files. The daemon is very fast and allows for frequent polling of values, with support for polling as frequent as every 10 seconds. WWW: http://www.collectd.org/ PR: ports/116736 Submitted by: Matt Peterson <matt at peterson.org>
2007-10-08 20:28:19 +02:00
SUBDIR += collectd
New port: net-mgmt/collectd5 (repocopy from net-mgmt/collectd) PR: ports/159223 Submitted by: Jin-Sih Lin <linpct@gmail.com> Approved by: wxs, tabthorpe (mentors, implicit), maintainer
2011-09-07 04:29:59 +02:00
SUBDIR += collectd5
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += confregdecode
- Fix sorting and minor cleanups in category Makefiles
2010-01-20 07:02:31 +01:00
SUBDIR += coovachilli
coWPAtty is designed to audit the security of pre-shared keys (PSK) selected in WiFi Protected Access (WPA) networks. WWW: http://www.willhackforsushi.com/Cowpatty.html PR: ports/121931 Submitted by: Dennis Herrmann <adox at mcx2.org>
2008-03-22 13:05:59 +01:00
SUBDIR += cowpatty
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += cricket
SUBDIR += darkstat
DHCDROP - utility for tracing and neutralizing(blocking) fake DHCP servers in Ethernet. Supports various modes. Theres possibility to set outgoing MAC addresses and optional settings in generated DHCP requests. Supports legal DHCP servers list. One can run it in interactive mode under users control or fully automatic mode for start up from script. WWW: http://www.netpatch.ru/en/dhcdrop.html PR: 137955 Submitted by: Babinski Nick <nick@malbi.dp.ua>
2009-08-19 17:46:08 +02:00
SUBDIR += dhcdrop
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += disco
SUBDIR += docsis
SUBDIR += driftnet
SUBDIR += echolot
SUBDIR += ehnt
SUBDIR += etherape
SUBDIR += ettercap
ezRADIUS is FreeRADIUS and Chillispot web-based management apps. It's easy, simple and expandable. The main aim is to provide radius server administrator a simple web-based management application. FreeRADIUS must configured to use MySQL as backend. WWW: http://ezradius.sourceforge.net/ PR: ports/124176 Submitted by: Lucio Costa <lucio@zetasolucoes.com.br> Approved by: gabor (mentor, implicit)
2008-06-07 16:58:07 +02:00
SUBDIR += ezradius
Add fetchconfig, a perl script for retrieving configuration of various network devices such as: * Cisco IOS * Cisco Catalyst * FortiGate * ProCurve * Parks * Alcatel Ethernet Routers (Riverstone) * Dell PowerConnect switches * Old Terayon 3200/3500 CMTS PR: 120843 Submitted by: salexanov at gmail.com
2008-02-27 23:09:37 +01:00
SUBDIR += fetchconfig
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += flow-extract
SUBDIR += flow-tools
- Add a port for flow-tools fork project which is aimed to be the flow-tools replacement. Volodymyr Kostyrko has kindly agreed to maintain this. WWW: http://code.google.com/p/flow-tools/ PR: ports/126252 Submitted by: Tomoyuki Sakurai <cherry@trombik.org>
2008-11-16 23:36:40 +01:00
SUBDIR += flow-tools-ng
Add flowd, a small, fast and secure NetFlow collector. It offers the following features: * Understands NetFlow protocol v.1, v.5, v.7 and v.9 (including IPv6 flows) * Supports both IPv4 and IPv6 transport of flows * Secure: flowd is privilege separated to limit the impact of any compromise * Supports filtering and tagging of flows, using a packet filter-like syntax * Stores recorded flow data in a compact binary format which supports run-time choice over which flow fields are stored * Ships with both Perl and Python interfaces for reading and parsing the on-disk record format * Is licensed under a liberal BSD-like license PR: ports/73722 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2004-11-12 21:52:09 +01:00
SUBDIR += flowd
FlowViewer, FlowGrapher, and now FlowTracker are tools that provide an easy web-based user interface for selecting, viewing, graphing, and now tracking NetFlow data stored using Mark Fullmer's flow-tools software. The user is able to filter data (inclusion or exclusion) by device, IP address range, port, router interface, autonomous system (AS), specified time interval, and now by protocols, TOS field, and TCP flags. Many of the flow-tools reports are configured as drop-down selections. Users are also able to save reports and graphs for later viewing. WWW: http://ensight.eos.nasa.gov/FlowViewer/ PR: ports/104554 Submitted by: Alex Samorukov, samm at os2.kiev.ua
2006-10-31 23:20:49 +01:00
SUBDIR += flowviewer
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += fprobe
Bacula-web is a php based web program that provides you a summarized output of jobs that have already run. It obtains its information from your catalog database. Aside from a nice graphical display, it provides summaries of your jobs, as well as graphs of job usage. This is a fairly high level bacula management tool. Here are a few points that one user made concerning this important tool: - It is web-based so can be accessed from anywhere. - It is "read only" users can examine the state of the backups but not write to anything and therefore do no damage - It packs a phenomenal amount of information into a single web-page - that I credit as being very good design! The documentation for bacula-web can be found in a separate bacula-web document in the bacula-docs release. WWW: http://www.bacula.org/ PR: ports/107617 Submitted by: Dan Langille <dan at langille.org>
2007-01-08 13:26:55 +01:00
SUBDIR += fruity
FusionInventory provides a complete, modular and multi-platform solution for: Hardware & software inventory (with agent or agentless using SNMP); Wake On Lan (WOL); Software deployment using OCS Inventory NG protocol and peer to peer download; Network connected devices (using Netbios, nmap and SNMP). WWW: http://fusioninventory.org/ PR: ports/154867 Submitted by: Gvozdikov Veniamin <g.veniamin at googlemail.com>
2011-03-18 05:15:18 +01:00
SUBDIR += glpi-plugins-fusioninventory-server
glpi-plugin-tracker-agent in a program writen in perl. It receive informations from glpi server and query networking devices to get informations like serial number, name, cartridge and page counter of printers and on switchs, devices connected on each port. After it send them to glpi server. PR: ports/140174 Submitted by: ddurieux <d.durieux at siprossii.com>
2010-01-10 00:19:47 +01:00
SUBDIR += glpi-plugins-tracker-agent
glpi-tracker-server in a plugin for glpi witch make inventory of devices by SNMP and get informations like serial number, name, cartridge and page counter of printers and on switchs, devices connected on each port. PR: ports/140158 Submitted by: ddurieux <d.durieux at siprossii.com>
2010-01-10 00:19:17 +01:00
SUBDIR += glpi-plugins-tracker-server
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += gps
net-mgmt/grepcidr: Filter IP addresses matching IPv4 CIDR/network specification grepcidr can be used to filter a list of IP addresses against one or more Classless Inter-Domain Routing (CIDR) specifications, or arbitrary networks specified by an address range. As with grep, there are options to invert matching and load patterns from a file. grepcidr is capable of comparing thousands or even millions of IPs to networks with little memory usage and in reasonable computation time. grepcidr has endless uses in network software, including: mail filtering and processing, network security, log analysis, and many custom applications. PR: ports/80315 Submitted by: Douglas Fraser <doug+ports@idmf.net>
2005-04-25 07:03:43 +02:00
SUBDIR += grepcidr
Return net-mgmt/grepip back to the fold.
2011-07-19 07:03:18 +02:00
SUBDIR += grepip
A SNMP library built on top of glib2 and gnet2. The goal of the project is to provide an efficient, clean, portable implementation of an SNMP stack for management applications. WWW: https://trac.eecs.iu-bremen.de/projects/gsnmp/ PR: ports/113511 Submitted by: Matt Peterson <matt@peterson.org>
2007-06-16 14:15:27 +02:00
SUBDIR += gsnmp
hastmon is a monitoring daemon that allows a couple of hosts to run a service providing automatic failover. Those machines will be called a cluster and each machine is one cluster node. hastmon is designed for clusters that work in Primary-Secondary configuration, which means that only one of the cluster nodes can be active at any given time. WWW: http://hastmon.googlecode.com/ Author: Mikolaj Golub <to.my.trociny@gmail.com> PR: ports/154036 Submitted by: Mikolaj Golub <to.my.trociny at gmail.com>
2011-03-17 18:28:19 +01:00
SUBDIR += hastmon
Add port net-mgmt/horde-nic - a very simple network service monitor WWW: http://horde.org/nic/ PR: ports/110541 Submitted by: Beech Rintoul <beech@alaskaparadise.com>
2007-03-19 23:33:48 +01:00
SUBDIR += horde-nic
Add Icinga, an enterprise grade open source monitoring system which keeps watch over networks and any conceivable network resource, notifies the user of errors and recoveries and generates performance data for reporting. Scalable and extensible, Icinga can monitor complex, large environments across dispersed locations. Icinga takes open source monitoring to the next level. WWW: http://www.icinga.org/
2011-02-23 18:45:16 +01:00
SUBDIR += icinga
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += icmpmonitor
SUBDIR += icmpquery
SUBDIR += ifgraph
SUBDIR += iftop
SUBDIR += iog
IPAcco is a free software package that helps a network admin to collect, visualize and analyze IP accounting data from the Cisco routers. Cisco routers themselves are capable of collecting IP accounting information . i.e. an unordered set of IP source-destination pairs along with a byte and packet counters corresponding to all network traffic flows that passed through the router's interfaces. These data can be a useful source for various analysis procedures and billing systems but by itself, in their raw form they are rather difficult to read and understand. In addition, a router cannot keep a lot of data . its memory is needed for purposes other than remembering what traffic, from what sources and where it forwarded two month ago. WWW: http://ipacco.sourceforge.net/ - Babak Farrokhi babak@farrokhi.net PR: ports/99451 Submitted by: Babak Farrokhi <babak@farrokhi.net>
2006-07-02 21:26:42 +02:00
SUBDIR += ipacco
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += ipacctd
SUBDIR += ipaudit
SUBDIR += ipcad
SUBDIR += ipcalc
SUBDIR += ipfm
New port: net-mgmt/ipplan (4.0.2) New port: net-mgmt/ipplan Version: 4.0.2 Description: IP address management and tracking PR: ports/74621 Submitted by: Maxim Tuliuk <mt@zoo.top.net.ua>
2004-12-22 06:32:51 +01:00
SUBDIR += ipplan
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += ipv6calc
Add ipv6gen 0.8, iPv6 prefix generator. PR: ports/79520 Submitted by: Vladimir Kotal <vlada@devnull.cz>
2005-04-04 14:52:34 +02:00
SUBDIR += ipv6gen
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += irrtoolset
SUBDIR += isic
Jnettop is a traffic visualiser, which captures traffic going through the host it is running from and displays streams sorted by bandwidth they use. WWW: http://sourceforge.net/projects/jnettop PR: ports/135304 Submitted by: Ryan Steinmetz <rpsfa@rit.edu>
2009-06-08 14:32:42 +02:00
SUBDIR += jnettop
Add kismet, an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. PR: ports/66274 Submitted by: Thomas Spreng <spreng@socket.ch>
2004-05-05 17:25:51 +02:00
SUBDIR += kismet
Lanmap sits quietly on a network and builds a picture of what it sees. WWW: http://www.parseerror.com/lanmap/ PR: ports/126730 Submitted by: Bapt <baptiste.daroussin at gmail.com>
2008-08-25 09:26:07 +02:00
SUBDIR += lanmap
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += libsmi
Macroscope is a squid, sendmail, courier, bpft log files analizer, IP sniffer and HTML report generator. Features: squid log file parser. sendmail log file parser. courier log file parser. bpft(ports/net-mgmt/bpft) log file parser. Database backends support: MySQL, Firebird. IP sniffer via pcap library (ports/net/libpcap). Direct commit changes to database in realtime (no log files). Traffic static HTML reports generating by date periods. Traffic dynamic HTML reports generating via CGI (Web interface). Multithreading architecture. Portable: BSD os'es and Windows NT family supported, but tested at this time only under FreeBSD 5.x 6.x amd64 i386 and Windows 2000 XP 2003. WWW: http://developer.berlios.de/projects/macroscope/ - Dukashvili Guram white_raven@users.berlios.de PR: ports/112653 Submitted by: Dukashvili Guram <white_raven at users.berlios.de>
2007-06-14 17:32:40 +02:00
SUBDIR += macroscope
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += mbrowse
MKLivestatus is a very simple and smart Nagios eventbroker module. Livestatus is concepted and tuned to reduce disk, memory and cpu loads caused by live-data processing on the Nagios system. Just as NDO, Livestatus makes use of the Nagios Event Broker API and loads a binary module into the Nagios process. But other than NDO, Livestatus does not actively write out data e.g. to the disk. Instead, it opens a socket for external applications to connect to and fetch the current status information from Nagios. WWW: http://mathias-kettner.de/checkmk_livestatus.html PR: ports/145449 Submitted by: Peter C. Lai <cowbert at gmail.com>
2010-06-07 08:07:04 +02:00
SUBDIR += mk-livestatus
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += mrtg
- Move net/mrtg-ping-probe to net-mgmt category, to improve consistency (mrtg port is already in net-mgmt.) PR: ports/112802
2007-06-03 06:00:15 +02:00
SUBDIR += mrtg-ping-probe
Add new port of mtrace, multicast traceroute for IPv4. Nudged by: fenner
2006-09-29 00:04:54 +02:00
SUBDIR += mtrace
Nagcon is a console application interfacing to Nagios 2.0 which gives you an overview of all services with troubled services. WWW: http://www.vanheusden.com/nagcon PR: ports/95096 Submitted by: Douglas K. Rand <rand@meridian-enviro.com>
2006-04-02 03:04:36 +02:00
SUBDIR += nagcon
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nagios
check_certexp is a Nagios plugin for checking the number of days left until a certificate expires. The check is done via an SSL connection (STARTTLS mechanisms are not supported). The plugin is written in Perl, should work with the embedded Perl interpreter (not tested though) and requires Net::SSLeay and Date::Manip to be installed on the Nagios host. Author: Holger Weiss <holger@CIS.FU-Berlin.DE> WWW: http://www.jhweiss.de/software/nagios.html PR: ports/110603 Submitted by: Eric Cronin <ecronin@gizmolabs.org>
2007-03-24 20:07:40 +01:00
SUBDIR += nagios-certexp-plugin
check_bacula is a plugin intended for use with the Nagios network monitoring system to monitor Bacula. PR: ports/125503 Submitted by: Anders Troback
2008-07-15 05:32:08 +02:00
SUBDIR += nagios-check_bacula
This check plugin is a Perl script which compares your local signature database (daily.cvd) version to the version advertised from the ClamAV site. It verifies the latest ClamAV revision using a DNS TXT query against current.cvd.clamav.net. WWW: http://bsd.phoenix.az.us/projects/check_clamav PR: ports/135512 Submitted by: Alexey V. Degtyarev
2009-06-14 00:31:47 +02:00
SUBDIR += nagios-check_clamav
check_cpu_usage is a plugin intended for use with the Nagios network monitoring system. This plugin checks the current CPU load and compares the current state to given thresholds, returning the result. It is written as shell script. PR: ports/151995 Submitted by: jamrich.majo at gmail.com
2010-12-03 22:52:49 +01:00
SUBDIR += nagios-check_cpu_usage
Check Email Delivery is a plugin for Nagios that allows you to check functionality within your email environment. Some typical uses of this plugin include: * check SMTP server * check IMAP server * check email delivery loop * check auto-responder function * keep an eye on email lag * monitor automated mailboxes * aggregate check results of multiple plugins * check email-to-FTP or other special email gateways WWW: http://buhacoff.net/software/check_email_delivery/ PR: ports/156915 Submitted by: Ryan Steinmetz <rpsfa@rit.edu>
2011-05-13 01:38:14 +02:00
SUBDIR += nagios-check_email_delivery
check_hdd_health is a Nagios plug-in written in shell to check HDD health. This script check HDD from S.M.A.R.T this values: - Spin Retry Count - Reallocated Sector Ct - Reallocated Event Count - Current Pending Sector - Offline Uncorrectable - Total health test PR: ports/152916 Submitted by: jamrich.majo at gmail.com
2010-12-10 05:51:19 +01:00
SUBDIR += nagios-check_hdd_health
check_hp_bladechassis is a plugin for the Nagios monitoring software which checks the hardware health of HP blade enclosures via SNMP. The plugin is only tested with the c7000 enclosure. WWW: http://folk.uio.no/trondham/software/check_hp_bladechassis.html PR: ports/158577 Submitted by: rpsfa@rit.edu (me) Approved by: tabthorpe (mentor)
2011-07-19 01:53:46 +02:00
SUBDIR += nagios-check_hp_bladechassis
check_ice is a Nagios plugin-in that checks if a stream is up or down on a shoutcast or icecast server. The program will look at the three digit error code (ie. 200, 404, etc.) to give the proper result code that Nagios can use to know if the stream is up, in warning or in critical. WWW: http://www.lns.com/papers/check_ice/ Submitted by: steinex
2009-07-14 23:40:06 +02:00
SUBDIR += nagios-check_ice
This "check_kumofs" is Nagios plugin for monitoring kumofs server node and manager node. WWW: http://github.com/etolabo/nagios-check_kumofs
2010-04-29 13:18:25 +02:00
SUBDIR += nagios-check_kumofs
This program checks memcached (or compatible) server by memcached protocol: SET, GET, DELETE and GET. WWW: http://github.com/hirose31/nagios-check_memcached_paranoid
2010-04-29 13:27:00 +02:00
SUBDIR += nagios-check_memcached_paranoid
The check_mysql_slave plugin allows you to check that a particular MySQL replication slave is running and (coming soon) is within a threshold bytes or seconds behind its master. WWW: http://buhacoff.net/software/check_mysql_slave PR: ports/157066 Submitted by: Ryan Steinmetz <rpsfa@rit.edu>
2011-05-29 03:45:26 +02:00
SUBDIR += nagios-check_mysql_slave
A plugin for Nagios to query common NetSNMP-exported information: -- disk status; -- processes status; -- swap status; -- load averages; -- anything else exported via NetSNMP's exec or extend directives. Feature safe: yes
2011-12-07 15:24:20 +01:00
SUBDIR += nagios-check_netsnmp
check_nick is a Nagios plugin-in written in python that will connect to an IRC server and check if a particular nick is online. Submitted by: steinex
2009-07-14 23:39:29 +02:00
SUBDIR += nagios-check_nick
New port: net-mgmt/nagios-check_ports Nagios Plugin to monitor your FreeBSD Ports Nagios Plugin to monitor your FreeBSD Ports Tree for updates or installed packages with known security vulnerabilities. PR: ports/126497 Submitted by: Anders Troback <freebsd@troback.com>
2008-08-17 08:18:42 +02:00
SUBDIR += nagios-check_ports
check_puppet - is a very simple Nagios plugin to check Puppet daemon availability with SNMP. Why check_puppet? 1. It does check whether puppetd and puppetmasterd is alive. 2. It does check state.yaml freshness 3. It does not require the full net-mgmt/nagios-plugins package on the client side 4. It is written in sh - code interpreter available in a base system WWW: http://renatasystems.org/freebsd/check_puppet.html PR: ports/135006 Submitted by: Alexey V. Degtyarev
2009-05-29 21:47:21 +02:00
SUBDIR += nagios-check_puppet
check_smartmon is a Nagios plug-in written in python that uses smartmontools to check disk health status and temperature. Submitted by: steinex
2009-07-14 23:39:07 +02:00
SUBDIR += nagios-check_smartmon
Nagios plugin for checking tftp servers. This plugin can retrieve a file and compare the size with a given value. WWW: http://mathias-kettner.de/download/check_tftp PR: ports/159737 Submitted by: hr <holgerrepp at googlemail.com>
2011-08-13 19:29:20 +02:00
SUBDIR += nagios-check_tftp
New port: net-mgmt/nagios-devel Nagios development stream (3.0.b2) PR: ports/114763 Submitted by: Jarrod Sayers <jarrod@netleader.com.au>
2007-08-30 16:54:59 +02:00
SUBDIR += nagios-devel
This is a small Nagios plugin written in PERL and designed to monitor the state of FreeBSD GEOM devices (specifically mirrors and striped volumes) from Nagios. WWW: http://www.geocities.com/ntb4real/proj/geom.htm PR: ports/126711 Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> Approved by: gabor (mentor)
2008-08-22 18:41:13 +02:00
SUBDIR += nagios-geom
check_pf is a plugin intended for use with the Nagios network monitoring system. This plugin checks the status of PF, the OpenBSD packet filter, and compares the current state count to given or default thresholds, returning the result. It is written in C. WWW: http://www.zampanosbits.com/check_pf/ PR: ports/110112 Submitted by: Kian Mohageri <kian.mohageri at gmail.com>
2007-03-09 11:11:58 +01:00
SUBDIR += nagios-pf-plugin
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nagios-plugins
This is a small Nagios plugin. This plugin relies on portaudit and/or portupgrade packages to be installed on your FreeBSD system. With these packages installed, the plugin will scan your system for either vulnerable packages, or obsolete packages - and display appropriate warnings to Nagios. Portaudit can also be successfully run remotely from nrpe, and does not require superuser privileges to operate. WWW: http://www.geocities.com/ntb4real/proj/portaudit.htm PR: ports/126710 Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> Approved by: gabor (mentor)
2008-08-22 18:44:18 +02:00
SUBDIR += nagios-portaudit
radauth was developed to allow for command line authentication against a radius server. This allows for more rapid testing/troubleshooting of radius authentication problems depending upon the method by which the person is authenticating (dial-up customers come to mind). Author: Matt Miller <mmiller_at_hick.org> WWW: http://freshmeat.net/projects/radauth/ PR: ports/91975 Submitted by: Andrew Kilpatrick <tiger_at_whitetigersd.com>
2006-01-21 20:01:25 +01:00
SUBDIR += nagios-radauth-plugin
Add new port nagios-silfreed-plugins, a set of SNMP oriented plugins for Nagios from silfreed.net believed to work significantly better than the bundled check_snmp plugin for most uses.
2004-07-22 08:34:59 +02:00
SUBDIR += nagios-silfreed-plugins
Readd nagios-snmp-plugins that was removed by accident in rev. 1.38
2005-02-22 08:12:51 +01:00
SUBDIR += nagios-snmp-plugins
The general idea of these scripts is to check as many things as possible with SNMP: disks, memory, load, network interfaces, running processes, etc... The other idea is to select disks, interfaces, process using regular expressions: - it is possible to test more than one disk/int/process in one Nagios check (ex.: eth* instead of eth0,eth1,eth2,...) - you only have to provide a unique part of the name to select a disk/int/process (ex. : "C:" instead of "C:\ Label: Serial Number xxxxxxx" makes it easy to use on multiple Windows hosts). Most of these scripts can make performance outputs. WWW: http://nagios.manubulon.com/ PR: ports/135523 Submitted by: Alexey V. Degtyarev
2009-06-15 23:13:19 +02:00
SUBDIR += nagios-snmp-plugins-extras
Add nagios-spamd-plugin, which monitors Spamassassins spamd
2005-11-01 12:29:24 +01:00
SUBDIR += nagios-spamd-plugin
Add nagiosagent to build
2009-09-14 20:41:43 +02:00
SUBDIR += nagiosagent
nagiosgraph is an application to collect performance data from nagios plugins, insert the data into rrdtool database, and generate webpages with rrdtool graphs of the performance data. nagiosgraph is easy to configure, and ready to use for many nagios plugins. WWW: http://nagiosgraph.sourceforge.net/ PR: ports/96769 Submitted by: Denis Shaposhnikov <dsh@vlink.ru>
2006-05-07 14:11:56 +02:00
SUBDIR += nagiosgraph
NagiosGrapher is a full-featured RRD based charting software especially for Nagios. You can extract perfdata and pluginoutput with preg to define datasources and display it with all RRD options. NG is Template based to graph thousands of similar charts with one configuration. WWW: https://www.nagiosforge.org/gf/project/nagiosgrapher/ PR: ports/139318 Submitted by: Cristiano Rolim <cristianorolim at hotmail.com>
2009-11-04 16:12:22 +01:00
SUBDIR += nagiosgrapher
NagiosQL is a web based administration tool for Nagios. It helps you to easily build a complex configuration with all options, manage and use them. NagiosQL is based on a webserver with PHP, MySQL and file access to the Nagios configuration files. WWW: http://www.nagiosql.org/ PR: ports/152974 Submitted by: Chris St Denis <chris at smartt.com>
2010-12-10 05:51:42 +01:00
SUBDIR += nagiosql
add nagiostat 1.0.0 Nagiostat parses performance-data from Nagios and generates graphs PR: 69370 Submitted by: Janos Mohacsi <mohacsi@niif.hu>
2004-07-22 03:48:42 +02:00
SUBDIR += nagiostat
Add nagircbot 0.0.20, IRC bot for Nagios. PR: ports/112210 Submitted by: Antoine Beaupre <anarcat AT koumbit.org>
2007-07-06 09:15:08 +02:00
SUBDIR += nagircbot
Add nagstamon 0.9.6.1, a nagios status monitor for your desktop.
2011-05-26 18:58:58 +02:00
SUBDIR += nagstamon
NagTail is like tail(1), but for the nagios status.dat file. PR: ports/157495 Submitted by: Ryan Steinmetz <rpsfa@rit.edu>
2011-06-04 21:02:16 +02:00
SUBDIR += nagtail
- new port net-mgmt/nagvis NagVis is a visualization addon for the well known network managment system Nagios. NagVis can be used to visualize Nagios Data, e.g. to display IT processes like a mail system or a network infrastructure. Key features * Display of single Hosts and Services * Visualize a complete Host- or Servicegroup with one icon * Display the summary state of a Host and all its services * Display only the real problems * Sub-map icons which represent a complete NagVis Map in one icon * Visualization of complete IT processes using self drawn graphics * Online documentation of IT environments including current states * Multilingual capabilities * Web configuration interface (WUI) WWW: http://www.nagvis.org/ PR: 151452 Submitted by: Andrew Sidorov <derfi _at_ vei.ru> Approved by: glarkin (mentor, implicit)
2010-11-01 21:45:55 +01:00
SUBDIR += nagvis
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nat
SUBDIR += nbtscan
The NDOUTILS addon is designed to store all configuration and event data from Nagios in a database. Storing information from Nagios in a database will allow for quicker retrieval and processing of that data and will help serve as a foundation for the development of a new PHP-based web interface in Nagios 3.0. WWW: http://www.nagios.org Approved by: araujo (mentor)
2008-08-14 04:58:34 +02:00
SUBDIR += ndoutils
NDPMon is an equivalent of ArpWatch for IPv6. NDPMon, Neighbor Discovery Protocol Monitor, is a tool working with ICMPv6 packets. NDPMon observes the local network to see if nodes using neighbor discovery messages behave properly. When it detects a suspicious Neighbor Discovery message, it notifies the administrator by writing in the syslog and in some cases by sending an email report. WWW: http://ndpmon.sourceforge.net Janos Mohacsi <janos.mohacsi@bsd.hu> PR: ports/106840 Submitted by: janos.mohacsi at bsd.hu
2006-12-21 21:20:49 +01:00
SUBDIR += ndpmon
Add nedi , network Discovery and Monitoring tool. PR: ports/108807 Submitted by: cristi
2007-02-07 14:56:46 +01:00
SUBDIR += nedi
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nefu
SUBDIR += net-snmp
SUBDIR += netams
NetAms Front - is an alternative to builtin web interface for NeTAMS software. One of the main advantages of this interface is use of PHP for generation of dynamic page allowing highly configurable web statistic available for system administrator with NeTAMS. Features: - View traffic for all the configured networks and peers - Manage accounting policies with web interface - Manage NeTAMS peers: clusters, networks, groups, hosts and users with web interface - NeTAMS database service WWW: http://netams.it2k.ru PR: ports/134426 Submitted by: Alexey V. Degtyarev
2009-05-11 00:36:07 +02:00
SUBDIR += netams-front
Add net-mgmt/netdisco - a powerful web-based tool for managing and mapping moderate to large sized networks. PR: ports/95563 Submitted by: shaun (me) Approved by: ahze (mentor, implicit)
2006-07-13 02:11:12 +02:00
SUBDIR += netdisco
Network Leak Finder is a collection of small perlscripts that detects connectivity between network segments. It is mostly useful to detect "leaks" in large organizations that have private network segments physically separated from the Internet. PR: ports/88424 Submitted by: Vaida Bogdan <vaidab@phenix.rootshell.be>
2005-11-12 13:28:49 +01:00
SUBDIR += netleak
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += netmask
Netmond - IP network monitoring daemon. PR: ports/65033 Submitted by: Viktor Fomichev <vfom@narod.ru>
2004-08-18 19:08:08 +02:00
SUBDIR += netmond
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += netspoc
- add nettop-0.2.3 Nettop is a program which looks like top, but is for network packets. It requires libpcap and slang to be installed on your computer. WWW: http://srparish.net/scripts/
2006-04-21 16:12:50 +02:00
SUBDIR += nettop
To ease the task of network administration, decrease the likelihood of erronous command execution and to maintain all network services from a central point, EnderUNIX SDT anounces the availability of its 9th open-source tool, netUstad. It has been coded in C language and includes its own HTTP server. The newly anounced version provides a web interface for system administrators to add/delete/update IPFW rulesets. You can manage your IPFW firewall via a TCP/IP connected remote PC, easily. Development version icludes modules to manage whole network services (routing tables, network interfaces) PR: ports/69176 Submitted by: Ozkan KIRIK <ozkan@enderunix.org> Approved by: krion (mentor) (implicitly)
2004-07-22 07:48:22 +02:00
SUBDIR += netustad
Netwag is a graphical front end for netwox. PR: ports/70307 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2004-08-15 21:39:15 +02:00
SUBDIR += netwag
* lcrzoex tools was renamed to netwox * update to 5.20.0 and move to net-mgmt category * new maintainer PR: ports/69609 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2004-08-01 11:39:38 +02:00
SUBDIR += netwox
[NEW PORT] net-mgmt/netxms: NetXMS - network monitoring system NetXMS is new and rapidly developing monitoring system, released under GPL2 license. It can be used for monitoring entire IT infrastructure, starting with SNMP-capable hardware (like switches and routers) and ending with applications on your servers. NetXMS is an extremely reliable and powerful monitoring system, enabling you to improve your network availability and service levels. WWW: http://www.netxms.org/ PR: ports/114495 Submitted by: samflanker@gmail.com
2007-09-07 14:15:26 +02:00
SUBDIR += netxms
Add net-mgmt/nfdump: NFDUMP tools support netflow v5 and v7 capturing and processing. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. It's syntax is similar to tcpdump. If you like tcpdump you will like nfdump. nfprofile - netflow profiler. Reads the netflow data from the files stored by nfcapd. Filters the netflow data according to the specified filter sets ( profiles ) and stores the filtered data into files for later use. nfreplay - netflow replay Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. WWW: http://nfdump.sourceforge.net PR: ports/72171 Submitted by: Janos Mohacsi <janos.mohacsi@niif.hu>
2004-11-07 00:48:46 +01:00
SUBDIR += nfdump
- Add net-mgmt/nfdump-devel back PR: ports/112807 Work done by: miwi
2007-06-10 13:41:39 +02:00
SUBDIR += nfdump-devel
net-mgmt/nfsen: Web based frontend to nfdump netflow collector PR: ports/79950 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2005-04-16 12:33:07 +02:00
SUBDIR += nfsen
Add ng_ipacct 20050228, Netgraph IP accounting.
2005-02-28 13:34:58 +01:00
SUBDIR += ng_ipacct
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nitpicker
NOC Project is an Operation Support System (OSS) for the Telco, Service provider and Enterprise Network Operation Centers (NOC). Areas covered by NOC: * Fault Management * Service Activation/Provisioning * Knowledge Base * Multi-VRF Address space management * Virtual Circuits management (VLAN, DLCI, etc) * Configuration Management * DNS provisioning * Peering management, RPSL and BGP filters generator, integrated looking glass * Reporting NOC Project is distributed under the term of BSD-like LICENSE. Enjoy! The NOC Project Team WWW: http://www.nocproject.org/ PR: ports/137489 Submitted by: Stanislav Svirid <count at 211.ru>
2009-08-18 11:07:12 +02:00
SUBDIR += noc
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nocol
activate nrpe2
2004-08-28 19:58:10 +02:00
SUBDIR += nrpe2
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nrpep
SUBDIR += nsca
Add nsca-client, a slave port for nsca without the server bits. PR: ports/96555 Submitted by: Martin Matuska <martin at matuska.org>
2006-09-14 14:40:39 +02:00
SUBDIR += nsca-client
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += nstreams
Open Computer and Software Inventory Next Generation is an application designed to help a network or system administrator keep track of the computers configuration and software that are installed on the network WWW: http://www.ocsinventory-ng.org/ PR: ports/115520 Submitted by: Dennis Cabooter
2007-08-24 16:55:36 +02:00
SUBDIR += ocsinventory-agent
Open Computer and Software Inventory Next Generation is an application designed to help a network or system administrator keep track of the computers configuration and software that are installed on the network WWW: http://www.ocsinventory-ng.org/ PR: ports/116756 Approved by: stas (mentor)
2007-10-29 11:07:27 +01:00
SUBDIR += ocsinventory-ng
The OpenLLDP project aims to provide a comprehensive implementation of the IEEE standard 802.1AB Link Layer Discovery Protocol. LLDP is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). WWW: http://sourceforge.net/projects/openlldp/ PR: ports/113063 Submitted by: Roar Pettersen <roar at uib.no> Approved by: garga (mentor)
2007-06-27 15:54:23 +02:00
SUBDIR += openlldp
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += openvmps
[New Port] net-mgmt/ourmon: Network Monitoring and Anomaly Detection System Ourmon is a network management and anomaly detection system for performing various SNMP RMON-like network analysis tasks. It uses the BSD bpf in combination with RRDTOOL as well as various "top talker" style tuples including: top-N flows which include IP, TCP, UDP, and ICMP flows, top SYN senders, top TCP/UDP ports, top single IP src to many IP dst senders, top single IP src to L4 (TCP/UDP), top ICMP errors which includes UDP creators of ICMP errors and other tools for both network management and anomaly detection. RRDTOOL graphs include a year of baselined information. New RRDTOOL graphs may be designed with user-configured BPF expressions a la tcpdump. Reports and logging for top talkers are also included. WWW: http://ourmon.cat.pdx.edu/ourmon/ PR: ports/84530 Submitted by: Charlie Schluting <manos@cs.pdx.edu>
2005-11-25 00:49:12 +01:00
SUBDIR += ourmon
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p0f
This module implements an alternative "event dispatcher" for Net::SNMP, using AnyEvent as a backend. It integrates Net::SNMP into AnyEvent: You can make non-blocking Net::SNMP calls and as long as other parts of your program also use AnyEvent (or some event loop supported by AnyEvent) and they will run in parallel. WWW: http://search.cpan.org/dist/AnyEvent-SNMP/
2011-06-24 17:30:08 +02:00
SUBDIR += p5-AnyEvent-SNMP
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-Cflow
Add p5-Cisco-Reconfig 0.8, parse and generate Cisco configuration files. PR: ports/102490 Submitted by: Gea-Suan Lin <gslin at gslin.org>
2006-09-28 09:05:59 +02:00
SUBDIR += p5-Cisco-Reconfig
This module collects ip validation routines to make input validation, and untainting easier and more readable. All functions return an untainted value if the test passes, and undef if it fails. This means that you should always check for a defined status explicitly. Don't assume the return will be true. (e.g. is_username('0')) The value to test is always the first (and often only) argument. WWW: http://search.cpan.org/dist/Data-Validate-IP/ PR: ports/119264 Submitted by: Tuc <freebsd-ports at t-b-o-h.net>
2008-01-14 12:15:31 +01:00
SUBDIR += p5-Data-Validate-IP
- Add p5-FusionInventory-Agent 2.1.9 fusioninventory-agent is an agent for OCS Inventory server and FusionInventory for GLPI servers. It creates local inventory of the machines (hardware and software) and send it to the server. It can also write it in a local XML file. This agent is the successor of the former linux_agent which was released with OCS 1.01 and prior. It also replaces the Solaris/AIX/BSD unofficial agents. WWW: http://search.cpan.org/dist/FusionInventory-Agent/ WWW: http://fusioninventory.org/ PR: ports/160655 Submitted by: Veniamin Gvozdikov <g.veniamin@googlemail.com>
2011-09-13 10:53:00 +02:00
SUBDIR += p5-FusionInventory-Agent
This perl extension enables its users to parse and utilize the logfiles that are generated by the famous MRTG (Multi Router Traffic Grapher) tool. WWW: http://search.cpan.org/dist/MRTG-Parse/ PR: ports/125879 Submitted by: gslin <gslin at host-1.pixnet.tw>
2008-07-26 00:55:15 +02:00
SUBDIR += p5-MRTG-Parse
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-Mon
Add net-mgmt/p5-NSNMP, a fast, flexible, low-level, pure-Perl SNMP library.
2005-12-14 10:03:19 +01:00
SUBDIR += p5-NSNMP
Nagios::Object - Creates perl objects to represent Nagios objects WWW: http://search.cpan.org/dist/Nagios-Object/
2010-10-20 23:31:54 +02:00
SUBDIR += p5-Nagios-Object
Object oriented helper routines for your Nagios plugin: This is the place for common routines when writing Nagios plugins. The idea is to make it as easy as possible for developers to conform to the plugin guidelines (http://nagiosplug.sourceforge.net/developer-guidelines.html). WWW: http://search.cpan.org/dist/Nagios-Plugins/ PR: ports/102391 Submitted by: Gerrit Beine <gerrit.beine(at)gmx.de> Approved by: krion (mentor)
2006-08-24 13:13:51 +02:00
SUBDIR += p5-Nagios-Plugin
Nagios plugin to observe LDAP WWW: http://search.cpan.org/dist/Nagios-Plugin-LDAP/ PR: ports/155145 Submitted by: Alexander Kriventsov <avk at vl.ru>
2011-03-18 10:37:41 +01:00
SUBDIR += p5-Nagios-Plugin-LDAP
Nagios::Plugins::Memcached - Nagios plugin to observe memcached. WWW: http://search.cpan.org/dist/Nagios-Plugins-Memcached/ PR: ports/118907 Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com> Approved by: itetcu (mentor, implicit)
2008-02-17 13:32:26 +01:00
SUBDIR += p5-Nagios-Plugins-Memcached
Add p5-Net-ACL 0.07, class representing a generic access-list/route-map. PR: ports/102491 Submitted by: Gea-Suan Lin <gslin at gslin.org>
2006-09-29 02:38:41 +02:00
SUBDIR += p5-Net-ACL
Net::Abuse::Utils provides serveral functions useful for determining information about an IP address including contact/reporting addresses, ASN/network info, reverse dns, and DNSBL listing status. WWW: http://search.cpan.org/dist/Net-Abuse-Utils/ PR: ports/127950 Submitted by: Gea-Suan Lin <gslin at gslin.org>
2008-10-11 16:50:31 +02:00
SUBDIR += p5-Net-Abuse-Utils
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-Net-CIDR
SUBDIR += p5-Net-IP
Add p5-Net-IP-Match-Regexp 0.94, efficiently match IP addresses against IP ranges via regexp. PR: ports/102017 Submitted by: Timur I. Bakeyev <bat at cpan.org>
2006-08-15 09:30:59 +02:00
SUBDIR += p5-Net-IP-Match-Regexp
Add net-mgmt/p5-Net-IP-Match-XS 0.03, a Perl module to efficiently match IP addresses against IP ranges.
2006-03-28 13:52:56 +02:00
SUBDIR += p5-Net-IP-Match-XS
Add net-mgtm/p5-Net-IP-Resolver 0.01, a Perl module to resolve IPs to a particular network.
2006-03-28 13:57:15 +02:00
SUBDIR += p5-Net-IP-Resolver
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-Net-IPv4Addr
SUBDIR += p5-Net-IPv6Addr
SUBDIR += p5-Net-Netmask
SUBDIR += p5-Net-SNMP
This module, Net::SNMP::Util, gives you functions of SNMP getting operation interfaces using Net::SNMP communicating with multiple hosts and multi-OIDs. WWW: http://search.cpan.org/dist/Net-SNMP-Util/ PR: ports/156021 Submitted by: Hsin-Han You <hhyou at cs.nctu.edu.tw>
2011-04-05 16:03:48 +02:00
SUBDIR += p5-Net-SNMP-Util
Net::Telnet::Cisco::IOS (NTCI) is an extension of Joshua Kereos's Net::Telnet::Cisco module and provides an easy way to manage and monitor Cisco IOS devices. I'll mention this a lot, but make sure you read up on Net::Telnet::Cisco for a lot of information. WWW: http://search.cpan.org/dist/Net-Telnet-Cisco-IOS/ PR: ports/120349 Submitted by: Tsung-Han Yeh <snowfly at yunteche.du.tw>
2008-02-07 17:56:39 +01:00
SUBDIR += p5-Net-Telnet-Cisco-IOS
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-NetAddr-IP
Add p5-NetAddr-IP-Lite 0.09, IPv4/6 and 128 bit number utilities. PR: ports/97938 Submitted by: Yuan-Chung Hsiao <ychsiao@ychsiao.org>
2006-06-10 04:09:17 +02:00
SUBDIR += p5-NetAddr-IP-Lite
This package provides a suite of modules for managing NetApp's NAS devices, commonly referred to as "filers". This is the first public release of my NetApp Perl API, and although I consider the code to be very stable, the API should be considered experimental. The convention I will be following regarding non-compatible API changes is as follows. I'm using a major.minor.subminor release naming convention, and I will promise to NOT make non-backwards compatible changes between subminor releases. However, in order to allow the API to evolve, it is entirely possible that non-backwards compatible changes will be made between minor releases. IOW, the major.minor release numbers can be considered an API version. Any changes to 1.1.0, 1.1.2, etc. must be backwards compatible with the previous 1.1.* releases. There is no guarantee that 1.2.0 will be 100% backwards compatible, although such changes will be made only when justified. The author does not believe in infinite backwards compatibility. WWW: http://search.cpan.org/dist/NetApp/ PR: ports/131166 Submitted by: Tsung-Han Yeh <snowfly at yuntech.edu.tw>
2009-03-10 16:13:43 +01:00
SUBDIR += p5-NetApp
Add p5-POE-Component-SNMP 0.92, event-driven SNMP interface.
2004-11-10 13:29:43 +01:00
SUBDIR += p5-POE-Component-SNMP
Add SNMP::Info, an object oriented perl5 interface to Network devices and various common MIBs
2004-08-12 14:18:09 +02:00
SUBDIR += p5-SNMP-Info
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-SNMP-MIB-Compiler
This module provides shortcuts when performing repetitive information-retrieval tasks with p5-SNMP. WWW: http://search.cpan.org/dist/SNMP-Simple/ PR: ports/118623 Submitted by: BluePex Security Solutions <freebsd-ports at bluepex.com>
2007-12-12 19:38:06 +01:00
SUBDIR += p5-SNMP-Simple
Read and process an SNMP trap from Net-SNMP's snmptrapd WWW: http://search.cpan.org/dist/SNMP-Trapinfo/ PR: ports/141343 Submitted by: Joris Dedieu <joris.dedieu@gmail.com>
2009-12-12 14:47:46 +01:00
SUBDIR += p5-SNMP-Trapinfo
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += p5-SNMP-Util
SUBDIR += p5-SNMP_Session
SUBDIR += p5-Telnet-Cisco
SUBDIR += p5-Tie-NetAddr-IP
This is a PERL interface to the Zenoss Monitoring System JSON API. It allows the ability to execute all available functions provided by the Zenoss API programmatically. Anything you could do from the Zenoss interface can be achieved via this module. This is a full service implementation, providing the construction of the call to the API and the handling of the response. WWW: http://search.cpan.org/dist/Zenoss/ PR: ports/160193 Submitted by: Phil Phillips
2011-08-26 12:58:07 +02:00
SUBDIR += p5-Zenoss
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += packit
Add pads 1.1.3, passively detect network assets. PR: ports/77801 Submitted by: Andrew Thompson <andy@fud.org.nz>
2005-02-21 08:43:33 +01:00
SUBDIR += pads
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += pancho
The pftabled daemon is a small helper to make your pf tables reachable from other hosts. You can add/delete/flush IP addresses to/from a remote table with a single UDP datagram. A simple client program is included to do this from the command line. WWW: http://wolfermann.org/pftabled.html PR: ports/105713 Submitted by: Bartlomiej Rutkowski <r at robakdesign.com>
2006-11-23 13:02:29 +01:00
SUBDIR += pftabled
Add a new shared extension for PHP.
2004-07-19 10:28:11 +02:00
SUBDIR += php4-snmp
Add a new shared extension for PHP.
2004-07-19 11:18:35 +02:00
SUBDIR += php5-snmp
- PHP 5.2 slave port PR: 145772 Submitted by: Alex Keda
2010-04-24 00:18:48 +02:00
SUBDIR += php52-snmp
- Move ports/www/phpip to ports/net-mgmt/phpip PR: 109106 [1] 109159 [2] Requested by: Michael <admin@oregonfast.net> Repocopy by: marcus [2] Approved by: maintainer (implicit)
2007-02-26 20:16:40 +01:00
SUBDIR += phpip
Weathermap is a network visualisation tool, to take data you already have and show you an overview of your network in map form. WWW: http://www.network-weathermap.com/ PR: ports/153835 Submitted by: Hsin-Han You <hhyou at cs.nctu.edu.tw> Feature safe: yes
2011-01-28 18:19:37 +01:00
SUBDIR += phpweathermap
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += pixilate
SUBDIR += pmacct
New port: net-mgmt/pnp, modern graphing tool for Nagios After evaluation of net-mgmt/nagiosgraph I decided to search for something more useful -- Nagios Graph was too hackish and unpretty for my taste. Digging through Nagios sites I had found PNP and was pleased by its simplicity and power. WWW: http://www.pnp4nagios.org/pnp/start PR: ports/126576 Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
2008-08-17 08:49:35 +02:00
SUBDIR += pnp
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += portmon
Add py-flowtools, an extension module gives you a simple python interface to NetFlow data as stored by Mark Fullmer's flow-tools package. PR: ports/72684 Submitted by: Roman Bogorodskiy <bogorodskiy@inbox.ru>
2004-10-15 18:41:49 +02:00
SUBDIR += py-flowtools
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += py-ipy
Add pyang, a freely available RFC 4741 YANG parser and validator.
2009-07-05 22:34:22 +02:00
SUBDIR += py-pyang
Add py-snmp2 2.0.9, SNMP framework for Python. PR: ports/102220 Submitted by: Dmitriy Kirhlarov
2006-08-20 11:31:23 +02:00
SUBDIR += py-snmp2
PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders for a subset of ASN.1 data types, sockets based networking etc.) written entirely in Python. WWW: http://pysnmp.sourceforge.net/ PR: ports/95673 Submitted by: Martin Jackson <mhjacks@swbell.net>
2006-04-17 13:25:00 +02:00
SUBDIR += py-snmp4
PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders for a subset of ASN.1 data types, sockets based networking etc.) written entirely in Python. This package provides command-line utilities (pysnmpget, etc). WWW: http://pysnmp.sourceforge.net/ PR: ports/95675 Submitted by: Martin Jackson <mhjacks@swbell.net>
2006-04-17 13:29:07 +02:00
SUBDIR += py-snmp4-apps
PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders for a subset of ASN.1 data types, sockets based networking etc.) written entirely in Python. This package provides additional python-format MIB files for use with PySNMP. WWW: http://pysnmp.sourceforge.net/ PR: ports/95674 Submitted by: Martin Jackson <mhjacks@swbell.net>
2006-04-17 13:27:30 +02:00
SUBDIR += py-snmp4-mibs
Add py-yapsnmp, yet another Python SNMP module based on net-snmp library
2005-01-14 16:49:47 +01:00
SUBDIR += py-yapsnmp
qKismet is graphical Kismet client writtent in Qt. It aims to be a full-featured client, which provides features allowing easy overwiew of Kismet output. Currently it displays networks, clients, alerts and status messages and allows to sort and filter them. WWW: http://qkismet.sourceforge.net PR: ports/141205 Submitted by: Gvozdikov Veniamin <g.veniamin at googlemail.com>
2009-12-13 01:27:45 +01:00
SUBDIR += qkismet
RackMonkey is a web-based tool for managing racks of equipment such as web servers, video encoders, routers and storage devices. Using a simple interface you can keep track of what's where, which OS it runs, when it was purchased, who it belongs and what it's used for. WWW: http://flux.org.uk/projects/rackmonkey/ PR: ports/143750 Submitted by: Eric F Crist <ecrist at secure-computing.net>
2010-02-12 20:27:38 +01:00
SUBDIR += rackmonkey
ramond monitors IPv6 networks for router advertisements. When an advert is received, a configurable action occurs. The tool was designed to `clear' (by sending spoofed zero lifetime adverts) rogue-routes sent by users running 6to4 gateways on a campus network. WWW: http://ramond.sourceforge.net Janos Mohacsi <janos.mohacsi@bsd.hu> PR: ports/143252 Submitted by: janos.mohacsi at bsd.hu
2010-01-27 14:04:35 +01:00
SUBDIR += ramond
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += rancid
- Add Develoment version of net-mgmt/rancid Rancid monitors a router's (or device's) configuration, including software and hardware (cards, serial numbers, etc), using CVS. Rancid currently supports Bay routers, Cisco routers, Juniper routers, Catalyst switches, Foundry switches, Redback NASs, ADC EZT3 muxes, MRTd (and thus likely IRRd), Alteon switches, HP procurve switches, Hitachi routers. Rancid logs into each of the devices in a router table file, runs various commands, chomps the output, and emails any differences ( sample) from the previous collection to a mail list. A looking glass is also included with rancid, based on Ed Kern's in use on http://nitrous.digex.net/. Rancid version has added functions, supports cisco, juniper, and foundry and uses the login scripts that come with rancid; so it can use rsh, telnet, or ssh to connect to your router(s). WWW: http://www.shrubbery.net/rancid/ PR: 110607 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu> Repocopy by: marcus
2007-03-26 11:06:53 +02:00
SUBDIR += rancid-devel
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += rate
rcpd is a RCP server intended specifically for router or network device clients. It is used to transfer configurations, boot images, and kernels images (eg: IOS) to the devices. These files are often tranfered with TFTP, but TFTP has reliability and speed issues and file size limitations due to it's protocol specification and underlying transport; while RCP is not affected. WWW: http://www.shrubbery.net/rcpd/ Submitted by: Babak Farrokhi <farrokhi at FreeBSD.org>
2006-12-16 23:26:15 +01:00
SUBDIR += rcpd
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += remarp
Committed (with some fixups), thanks! PR: ports/67327 Submitted by: Paul Chvostek
2004-06-14 18:56:13 +02:00
SUBDIR += rotorouter
Generic web-based frontend for the popular MRTG systems monitoring software. WWW: http://www.steveshipway.org/software/ PR: ports/106637 Submitted by: Xavier Beaudouin <kiwi at oav.net>
2006-12-12 20:31:12 +01:00
SUBDIR += routers2
Extensions of generic web-based frontend for the popular MRTG systems monitoring software. WWW: http://www.steveshipway.org/software/ PR: ports/106714 Submitted by: Xavier Beaudouin <kiwi at oav.net>
2006-12-14 12:46:20 +01:00
SUBDIR += routers2-extensions
Extras extensions and third party scripts for routers2 frontend WWW: http://www.steveshipway.org/software/ PR: ports/106720 Submitted by: Xavier Beaudouin <kiwi at oav.net>
2006-12-14 23:24:26 +01:00
SUBDIR += routers2-extras
Connect rrdbot to the build (added by koitsu 2 weeks ago)
2008-11-28 16:44:04 +01:00
SUBDIR += rrdbot
Add net-mgmt/rubygem-snmp: This library implements SNMP (the Simple Network Management Protocol). It is implemented in pure Ruby, so there are no dependencies on external libraries like net-snmp. You can run this library anywhere that Ruby can run.
2006-02-16 07:29:53 +01:00
SUBDIR += rubygem-snmp
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += satellite
SBLIM (pronounced "sublime"), the Standards Based Linux Instrumentation for Manageability is an IBM-initiated Open Source project, intended to enhance the manageability of GNU/Linux systems. It does so by enabling WBEM, Web Based Enterprise Management. # I use this for VMware ESXi to obtain CIM info.
2009-01-05 12:36:25 +01:00
SUBDIR += sblim-wbemcli
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += scdp
SUBDIR += scli
Add sdig, Switch Digger, a program designed to track down computers to the finest level of information available at the moment. Sometimes this can mean an exact description of a port in a building anywhere in an enterprise. PR: ports/64728 Submitted by: Russell Jackson <rjackson@cserv62.csub.edu>
2004-03-28 15:33:06 +02:00
SUBDIR += sdig
[NEW PORT] net-mgmt/send: Secure Neighbor Discovery implementation for IPv6 DoCoMo's Open Source SEND project provides an implementation of RFC3971 Secure Neighbor Discovery (SEND). SEND cryptographically secures the IPv6 neighbor discovery protocol, countering the threats discussed in RFC3756 (IPv6 Neighbor Discovery (ND) Trust Models and Threats). DoCoMo's SEND is implemented completely in user space, so it is portable and lends itself to experimentation. It currently runs on Linux (tested on 2.6 kernels) and FreeBSD (tested on 5.4). Also included in the distribution are implementations of RFC3972 Cryptographically Generated Addresses (CGAs) and RFC3779 X.509 Extensions for IP Addresses and AS Identifiers. WWW: http://www.docomolabs-usa.com/lab_osrc_guide.html Doesn't work on FreeBSD > 6.x though. Hopefully the submitter will submit patches for it now it is commited. PR: ports/116540 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2007-09-23 08:39:06 +02:00
SUBDIR += send
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += sendip
SUBDIR += sing
SUBDIR += sipcalc
Sjitter is a command line client/server to measure jitter (based on RFC 1889), one way UDP delay and bandwidth. PR: ports/104898 Submitted by: self Approved by: miwi (mentor)
2006-11-08 20:42:21 +01:00
SUBDIR += sjitter
Simple traffic analysis and data reporting collection server for LFAP This package contains a small Lightweight Flow Accounting (LFAP) server and LFAP API library. LFAP open solution to delivering accounting data from Riverstone Networks Switches and Routers. You can use the sfas program to obtain micro-flow information from a Riverstone switch running either in Layer 4 bridging mode, routing or MPLS LSPs. Data that can be collected includes everything from an IPv4 header and UDP headers and the src/dst port from a TCP header. WWW: http://www.riverstonenet.com/support/nmops/
2004-07-19 11:26:00 +02:00
SUBDIR += slate
[repocopy] net/smokeping -> databases/smokeping Based on the description of this port, it belongs more in net-mgmt than in net. PR: ports/114323 Submitted by: Edwin Groothuis <edwin@freebsd.org> Approved by: lth@
2007-08-11 13:13:39 +02:00
SUBDIR += smokeping
New port: snmp++ v3 library SNMP++v3.x is a C++ API which supports SNMP v1, v2c, and v3. SNMP++v3.x is based on SNMP++v2.8 from HP* and extends it by support for SNMPv3 and a couple of bug fixes. The v3 support to SNMP++ and AGENT++ is provided by courtesy of Jochen Katz (katz07@agentpp.com). SNMP++v3.x extends the original SNMP++v2.8 by the following: # SNMPv3 including User Security Model (USM) with: # MD5 and SHA authentication # DES and IDEA privacy # Thread-safety # Bug-fixes WWW: http://www.agentpp.com/snmp_pp3_x/snmp_pp3_x.html for further details. PR: ports/112669 Submitted by: Nicolai Petri <nicolai@petri.cc>
2007-09-07 09:53:34 +02:00
SUBDIR += snmp++
This is a plugin package for Nagios. Quoting from the snmp4nagios home page: SNMP4Nagios is a package of Nagios plugins which use SNMP to query hosts. While some of the plugins use standard MIBs, most are designed for vendor specific agents. Unlike other Nagios plugins, they are able to scan hosts for objects which can be monitored. They also can keep performance logs and draw plots of these using Tobias Oetiker's RRDTool. Currently devices by Brocade, Cisco, Compaq/HP and Network Appliance as well as computers running Microsoft Windows or Net-SNMP and uninterruptable power supplies are supported. WWW: http://snmp4nagios.sourceforge.net/ PR: ports/124954 Submitted by: Ryan Steinmetz
2008-06-29 00:36:14 +02:00
SUBDIR += snmp4nagios
SNMPTT (SNMP Trap Translator) is an SNMP trap handler written in Perl for use with the Net-SNMP / UCD-SNMP snmptrapd program (www.net-snmp.org).
2004-05-24 20:41:01 +02:00
SUBDIR += snmptt
Add softflowd, flow-based network traffic analyser capable of Cisco NetFlow data export. Softflowd semi-statefully tracks traffic flows recorded by listening on a network interface or by reading a packet capture file. These flows may be reported via NetFlow to a collecting host or summarised within softflowd itself. PR: ports/73723 Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
2004-11-12 22:06:11 +01:00
SUBDIR += softflowd
net-mgmt/wispytools has been replaced by net-mgmt/spectools. PR: 117044 Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
2007-10-29 15:19:48 +01:00
SUBDIR += spectools
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += subcalc
SUBDIR += sysmon
SUBDIR += tcpreplay
Add net-mgmt/tcptrack: tcptrack is a sniffer which displays information about TCP connections it sees on a network interface. It passively watches for connections on the network interface, keeps track of their state and displays a list of connections in a manner similar to the unix 'top' command. It displays source and destination addresses and ports, connection state, idle time, and bandwidth usage. WWW: http://www.rhythm.cx/~steve/devel/tcptrack PR: ports/72543 Submitted by: Tor Halvard Furulund <squat@squat.no>
2004-11-07 01:24:43 +01:00
SUBDIR += tcptrack
TorK is a powerful anonymity manager for the KDE Desktop on Linux and Unix systems. It first helps you to install, configure and use Tor. It then reduces the task of anonymizing most applications to a single-click, including Firefox, Opera, Konqueror, Pidgin, Kopete, SSH, and IRC.For advanced users TorK provides detailed network information, and more, in an accessible manner. WWW: http://www.anonymityanywhere.com/tork/ Submitted by: Beat Gätzi <beat at chruetertee.ch>
2008-02-12 19:43:17 +01:00
SUBDIR += tork
New port: net-mgmt/torrus The Data Series Processing Framework - think mrtg with xml configs Torrus is designed to be the universal data series processing framework. Although most users deploy Torrus for SNMP monitoring, it might be useful for data series of any nature. Tobi Oetiker's RRDtool is used for data storage. * Configuration compiler and validator. It processes the XML configuration files and saves the configuration into a database. * View renderer and the web interface. They generate HTML and the graphical representation of the datasources and provide user authentication and authorization. All generated output is controlled by the configuration parameters and templates. The users can easily create their own presentation of data series. * SNMP Collector. Modular collector core architecture allows further extension with new collector and storage types. Any datasource can have its own polling schedule. * SNMP Device Discovery Tool. Devdiscover is a new, modular, flexible, and expandable tool for automatic generation of Torrus configuration files. New device types and MIBs are easily added as independent Perl modules. * Threshold monitor. All data, regardless of their type and nature, can be monitored according to the user-defined rules. The rules can also include the datasource-specific parameters, e.g. boundary values etc. The thresholds are specified by RPN expressions. WWW: http://torrus.org - Corey Smith corsmith@gmail.com PR: ports/86634 Submitted by: Corey Smith <corsmith@gmail.com>
2005-11-23 14:24:25 +01:00
SUBDIR += torrus
Vidalia is a graphical Tor controller based on Qt 4.x. WWW: http://www.vidalia-project.net/ Authors: Matt Edman and Justin Hipple PR: ports/110034 Submitted by: Fabian Keil <fk at fabiankeil.de>
2007-03-09 11:08:58 +01:00
SUBDIR += vidalia
Virt Viewer provides a graphical viewer for the guest OS display. At this time is supports guest OS using the VNC protocol. Further protocols may be supported in the future as user demand dicatates. The viewer can connect directly to both local and remotely hosted guest OS, optionally using SSL/TLS encryption. WWW: http://virt-manager.org/ PR: ports/157695 Submitted by: Jason Helfman <jhelfman@experts-exchange.com>
2011-07-08 21:41:22 +02:00
SUBDIR += virt-viewer
virtinst is a module to help in starting installations of Fedora/Red Hat Enterprise Linux related distributions inside of virtual machines. It supports both paravirt guests (for which only FC and RHEL guests are currently supported) as well as fully virtualized guests. It uses libvirt (http://www.libvirt.org) for starting things. WWW: http://virt-manager.org PR: ports/157697 Submitted by: Jason Helfman <jhelfman@experts-exchange.com>
2011-07-09 08:55:22 +02:00
SUBDIR += virtinst
wdiag is a utility to monitor Westell DSL modem diagnostics and line statistics. It reports SNR, Attenuation, etc for the DSL line. WWW: http://wdiag.sourceforge.net/ PR: ports/104231 Submitted by: Josh Carroll <josh.carroll at gmail.com>
2006-10-31 03:46:34 +01:00
SUBDIR += wdiag
Network Weathermap is a perl tool that displays in a visual way the utilization of the network links of your network. The required data are acquired from graphs created by the MRTG package and are displayed as two ways colored arrows on a map representing the logical topology of the network. The resulted image is presented in a web page using extra DHTML and JavaScript code for web-over pop-ups, based on the OverLib JavaScript library. WWW: http://netmon.grnet.gr/weathermap/ Submitted by: Felippe de Meirelles Motta <lippe@freebsdbrasil.com.br> (via private mail)
2007-05-31 11:05:35 +02:00
SUBDIR += weathermap
WepLab is a tool designed to teach how WEP works, what different vulnerabilities it has, and how they can be used in practice to break a WEP protected wireless network. So far, WepLab more than a Wep Key Cracker, is a Wep Security Analyzer designed from an educational point of view. WWW: http://weplab.sourceforge.net PR: ports/102476 Submitted by: Anton Karpov <toxa at toxahost.ru>
2006-08-24 15:13:41 +02:00
SUBDIR += weplab
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
SUBDIR += whatmask
SUBDIR += wide-dhcp
Add wifimgr 1.0.1, wiFi Networks Manager. PR: ports/140473 Submitted by: J.R. Oldroyd <fbsd at opal.com>
2009-11-22 23:19:10 +01:00
SUBDIR += wifimgr
- rename hobbit-* -> xymon-*
2009-01-11 22:14:29 +01:00
SUBDIR += xymon-client
SUBDIR += xymon-server
Yet Another Bandwidth Meter displays current bandwidth utilization using the PNG image format. It somewhat resembles the Linux bwbar (although there is no connection to it). Features include measurement both on interface and assigned IP-address basis, possible to run non-root and non-setuid, quite customizable (colours, geometry, device max speed, etc). It also includes text output to the image. PR: ports/76275 Submitted by: Fredrik Lindberg <fli@shapeshifter.se>
2005-02-25 22:01:57 +01:00
SUBDIR += yabm
YAF is Yet Another Flowmeter. It processes packet data from pcap(3) dumpfiles as generated by tcpdump(1) or via live capture from an interface using pcap(3) into bidirectional flows, then exports those flows to IPFIX Collecting Processes or in an IPFIX-based file format. YAF's output can be used with the SiLK flow analysis tools and any other IPFIX compliant toolchain. WWW: http://tools.netsa.cert.org/yaf/index.html PR: ports/136118 Submitted by: Dikshie <dikshie at sfc.wide.ad.jp>
2009-07-01 12:48:16 +02:00
SUBDIR += yaf
- Complete repomove of net/zabbix-agent to net-mgmt/zabbix-agent PR: ports/113658 Repocopy by: marcus
2007-06-18 17:31:39 +02:00
SUBDIR += zabbix-agent
- Update zabbix to 1.8 - Split the port to server, frontend, agent and proxy slaves - Add zabbix16 for people who don't want to update to 1.8 yet PR: ports/141364 Submitted by: Jim Riggs <ports@christianserving.org> (maintainer)
2009-12-13 23:30:18 +01:00
SUBDIR += zabbix-frontend
SUBDIR += zabbix-proxy
SUBDIR += zabbix-server
An open source application, server and network management platform based on the Zope application server. WWW: http://zenoss.com/ PR: ports/156655 Submitted by: Phil Phillips <phil@experts-exchange.com> Approved by: rene (mentor)
2011-07-21 18:55:07 +02:00
SUBDIR += zenoss
This ZenPack provides performance monitoring of the Apache HTTP Server. This ZenPack is documented in the Zenoss Extended Monitoring Guide. WWW: http://community.zenoss.org/docs/DOC-3442 PR: ports/157133 Submitted by: Anthony Garcia <agarcia@experts-exchange.com>
2011-10-29 21:58:04 +02:00
SUBDIR += zenpack-apachemonitor
Zenoss comes with the nagios command check_ping. This zenpack implements that nagios ping check. The template provides the Round-Trip-Average time along with the packet loss rate. These two graphs are put in the "Performance" tab for each device utilizing this template. WWW: http://community.zenoss.org/docs/DOC-3416 PR: ports/157719 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-30 17:43:22 +01:00
SUBDIR += zenpack-checkping
This ZenPack provides additional monitoring options for Dell machines with additional zCollectorPlugins: * community.snmp.DellCPUMap * community.snmp.DellDeviceMap * community.snmp.DellExpansionCardMap * community.snmp.DellFanMap * community.snmp.DellHardDiskMap * community.snmp.DellLogicalDiskMap * community.snmp.DellMemoryModuleMap * community.snmp.DellNicMap * community.snmp.DellPowerSupplyMap * community.snmp.DellTemperatureSensorMap Reports: * /Device Reports/Dell PowerEdge Reports/DRAC Controllers * /Device Reports/Dell PowerEdge Reports/Storage Controllers * /Device Reports/Dell PowerEdge Reports/Hard Disks WWW: http://community.zenoss.org/docs/DOC-3410 PR: ports/157196 Submitted by: Jeffrey Leung <zenoss@experts-exchange.com>, Anthony Garcia <agarcia@experts-exchange.com>
2011-10-18 21:01:29 +02:00
SUBDIR += zenpack-dellmon
DellMonitor provides custom modeling of devices running the Dell OpenManage agents. It also contains hardware identification for Dell proprietary hardware. The information is collected through the SNMP interface. The following information is modeled. Hardware Model Hardware Serial Number Operating System CPU Information (socket, speed, cache, voltage) PCI Card Information (manufacturer, model) WWW: http://community.zenoss.org/docs/DOC-3492 PR: ports/157135 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-30 20:33:00 +01:00
SUBDIR += zenpack-dellmonitor
This ZenPack is currently used by the HP ProLiant Monitor, Dell Monitor and ODBC Datasource (and many others) to display additional hardware details and could be used by other ZenPacks as well. Examples of details include: * dynamic deviceHardwareDetail tab (additional sections can be added or removed by any ZenPack) * dynamic deviceOsDetail tab * dynamic deviceSoftwareDetail tab * Number of CPU Cores * Memory Modules section * Logical Drives sections * status indication for all hardware components * It also make changes deviceOSDetail tab to show only monitored Network Interfaces WWW: http://community.zenoss.org/docs/DOC-3452 PR: ports/157197 Submitted by: Jeffrey Leung <zenoss@experts-exchange.com>, Anthony Garcia <agarcia@experts-exchange.com>
2011-10-21 22:12:02 +02:00
SUBDIR += zenpack-deviceadvdetail
This ZenPack provides the ability to quickly search for Devices by their name or by their IP address. Search is triggered by typing 3 or more characters into the text box, which then returns the first 10 matches. The use of the asterisk wild-card is supported, so you may search for fuzzy matches dynamically. WWW: http://community.zenoss.org/docs/DOC-7453 PR: ports/157505 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-29 21:31:19 +02:00
SUBDIR += zenpack-devicesearch
This ZenPack adds a portlet called "Show Graph" which enables users to show any graph/multi graph reports on their dashboard. Several columns (as defined in report options) are supported. More details can be found at the provided url. WWW: http://community.zenoss.org/docs/DOC-3421 PR: ports/157190 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-30 17:42:16 +01:00
SUBDIR += zenpack-graphportlet
When troubleshooting network issues, it can be very useful to have all the interface graphs for a device on the same screen. This helps with spotting trends, or tracing where traffic is flowing through a switch or router. The only way to natively achieve this with Zenoss is to create a graph or multi-graph report for every network device manually, which can be a chore if you have more than a few network devices. This ZenPack provides a new link on the left side of a device detail view called "Interface Graphs" - this view shows the graphs for all of the network interfaces on the device in one place, allowing for fast spotting of issues or traffic flows. Both the interface name and the description (if any) are used to title the graphs to aid with identification. Note that with stacked switches, you can end up with a very large number of graphs on the page, so tuning this slightly via the configuration properties below could be a good idea in these situations. WWW: http://community.zenoss.org/docs/DOC-10226 PR: ports/157503 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-27 16:36:31 +02:00
SUBDIR += zenpack-interfacegraphs
This ZenPack leverages the libvirt API for monitoring virtualization servers (e.g. XEN, KVM, etc...). WWW: http://community.zenoss.org/docs/DOC-4687 PR: ports/157715 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-30 18:46:40 +01:00
SUBDIR += zenpack-libvirt
This ZenPack consists of a report for listing each MAC address and the Device and Interface it is associated with. This report makes use of the layer 2 catalog already present in Zenoss. It only allows sorting by MAC address and is not exportable. The author made this decision because the processing time was too great for an installation with more than a few thousand interfaces. The author can make another one available that is exportable and sortable by the other two fields (device and interface), if anyone decides they would like to live through the painful wait time. More details can be found at provided url. WWW: http://community.zenoss.org/docs/DOC-3512 PR: ports/157191 Submitted by: Zenoss <zenoss@experts-exchange.com>
2011-10-30 17:41:50 +01:00
SUBDIR += zenpack-macreport
Say hello to the new "net-mgmt" category. There are probably more ports that belong here than the ones I have identified and moved in this, first, pass. Approved in principle by: marcus
2004-02-23 05:42:13 +01:00
Add the net-mgmt category, but do not connect it to the build until it has some ports.
2004-02-04 06:14:43 +01:00
.include <bsd.port.subdir.mk>
Reference in a new issue Copy permalink