o Fix build.
o SIZEify.
o Respect CFLAGS and PTHREAD_LIBS.
o Remove more empty directories.
PR: ports/63080
Submitted by: Markus Brueffer <brueffer@phoenix-systems.de>
. Use official "install-libs" target rather than try to install things
with a custom post-install target.
. Add a note to pkg-message that we're using a modified copy.
PR: 63327
Submitted by: Matthias Andree <matthias.andree@gmx.de> (maintainer)
* Fix build on non-i386 platforms.
* Obey CC and CPP in a few places (qmake, qtcsh, pvm
integration).
* Use USE_GETTEXT.
* Sort USE_* variables.
* Remove $Aero$ revision tags since I now work in perforce.
* Fix a patch so openssl is found and add to plist.
* Move maintainer make targets to the bottom. Add one to build a
distfile from CVS.
* Sizify.
* Use %D instead of %%PREFIX%% in plist.
PR: ports/63361
Submitted by: brooks
- Bugfix: fsck_ext2fs would abort the boot when run as part of
/etc/rc and e2fsck had repaired a file system. fsck_ext2fs
now maps exit codes 0 to 3 from e2fsck to 0. If e2fsck is
aborted by a signal or an exit code of 4 or higher, maps to
EXIT_FAILURE.
PR: ports/63320
Submitted by: maintainer
(patch by Greg Lewis)
- fix compile failure on FreeBSD 5 when older port version is installed
(problem reported by Tim Robbins; FreeBSD 4 was unaffected)
- ignore m_large_file test on alpha and sparc64, apparently the test
only stumbles over a different default block size and the failure
isn't serious (problem reported by Greg Lewis)
- cosmetic: swap $(CC) and gmake check in post-build so check comes last
- bump PORTREVISION: the patches change the code on some systems
- pkg-message.in:
* use install when ln fails, /sbin and /usr/local
need not be the same file system
* tell the user he needs to repeat the steps after port upgrade
- revise pkg-message generation and move it to pre-install,
no need to cat(1) the file, sed(1) can read files by itself.
- add pkg-deinstall: remind the user to remove e2fsck and fsck_ext2fs from
/sbin if he's deinstalling for good, rather than upgrading.
PR: 63167
Submitted by: Matthias Andree <matthias.andree@gmx.de>
. Make the submitter the maintainer.
. Run test suite as part of the build.
. Support -DDISABLE_NLS to compile without gettext.
. Add a fsck_ext2fs wrapper that interfaces between fsck and e2fsck.
PR: 62563
Submitted by: Matthias Andree <matthias.andree@gmx.de>
<snip>
- Improved performance of the new L-EC code by up to a factor 2 depending
on the hardware.
- 'read-test' runs L-EC encoder over mode 1 or mode 2 form 1 sectors to
allow performance testing in conjunction with option --speed.
new:
- toc2cddb: translates a TOC file into a cddb file. (Giuseppe Corbelli)
new:
- cue2toc: convert CUE to TOC format for audio CDs. (Matthias Czapla)
<snip>
Note: The 1.1.8 tarball was re-rolled twice because of missing files and
a show-stopper in gcdmaster and some SourceForge mirrors still might
need to catch up on it. If you have problems with differing checksums
please fetch from ftp://us.dl.sourceforge.net/pub/sourceforge/cdrdao,
which is known to carry the latest version.
- Use/respect DATADIR and DOCSDIR.
- Make PREFIX-clean by respecting PREFIX instead of LOCALBASE.
- First part of splitting gcdmaster into a slave port because the conditional
compilation via HAVE_GNOME caused problems when gnomelibs where installed
afterwards (PR 61840).
- Tidy the PORTDOCS a bit, e.g. no longer install the release notes for
previous releases, they are easily accessible on the homepage anyway.
- On deinstall, remind the user to delete the global config file if existent
and permanently removing this port.
- In pkg-descr, mention that cdrdao also handles the bin/cue format. Wording
taken from the Debian cdrdao package.
- Fix some references in the cdrdao manpage to fit FreeBSD.
- Remove the WITH_PTHREADS knob, it was never very usefull on FreeBSD.
- Remove the WITHOUT_SCGLIB knob, the "native" CAM interface of cdrdao has
issues with ATAPICAM and probably will be removed in future version.
- Remove "-DBSD_SCSI_SENSE_BUG" from CFLAGS, for an explanation see
sysutils/sformat/Makefile revision 1.5.
Submitted by: maintainer
Major changes to the port infrastructure:
- Replace WWWDOCROOT and WEBFRONTURL options with WEBFRONTDIR
(defaults to www/ganglia).
- Install files under ${PREFIX}/${WEBFRONTDIR}.
- Since the files are no longer installed in the document root,
add a pkg-message with a suggest addition to Apache's
httpd.conf.
- Use USE_PHP and WANT_PHP_MOD.
- Add a note about installing PHP with GD support at done in
mail/nocc.
- Remove conf.php only if it is identical to conf.php.sample as
done in mail/nocc.
- Sizify.
- Don't install the empty addons directory since packages won't
contain it.
PR: ports/62802
Submitted by: Brooks Davis <brooks@FreeBSD.org> (maintainer)
2. SIZEify.
3. Get rid of junk files from the install.
4. share/luma -> %%DATADIR%% in the packing list.
PR: 62733 [1] [2]
Submitted by: Alexander Novitsky <alecn@icc-vvd.ru> (maintainer) [1] [2]
Changelog:
- The "empty CC field" bug was fixed, as well as the
incorrect generation of SMTP headers.
- The application sets its icon now.
- A sysctl call is used instead of uname on BSD systems,
to avoid getting a truncated "uname -a" output.
Submitted by: Miguel Mendez <flynn@energyhq.es.eu.org> (maintainer)
PR: 62727
a year now, so return his ports to the unmaintained pool in the hopes
that someone will adopt them and give them a good home.
While here, pacify portlint on all of them.
Discussed with: various members of portmgr@, at various times over
the last few months.
Open opens a new vt and runs a command on it. It can be used as a simple
way to start several console logins without having to type your passwd
on each VT in turn. open can be used as a simpler to use replacement for
the doshell(8) command.
open is similar in functionality to the AIX/RS6000 command of the same name.
fixed bug introduced 2004/02/05 which caused true default options,
such as INCDEPTH, to be destroyed when new options blocks are defined.
PR: ports/62560
Submitted by: Matt Pounsett <mattp@conundrum.com> (maintainer)
- provide a dummy exclusion pattern if the exclude file exists but
doesn't contain any patterns (Yen-Ming Lee <leeym@FreeBSD.org>)
- progress status display for interactive phase, too
- minor code cleanups, improved comments/docs
PR: ports/62539
Submitted by: Stefan Walter <sw@gegenunendlich.de> (author)
FreeSBIE project, exactly:
o Bug fixes
o Improved scripts, especially useful for -CURRENT
o Introduction of cloop compressed filesystem images
PR: ports/62493
Submitted by: Thomas E. Zander <riggs@rrr.de> (maintainer)
Approved by: nork (mentor/implicitly)
a patch, and adds support for some new UPS'.
For the port, update MASTER_SITES, add new stuff and retire one driver
that's been consolidated into one of the existing drivers.
+------------------------------------------------------------------------------
+UPGRADE NOTICE (Important)
+------------------------------------------------------------------------------
+ If you are upgrading from a previous version of rsnapshot, please be aware
+ of the following differences:
+
+ - The first backup interval must have a value of at least 2 if more than
+ one backup interval is defined.
+
+ - rsnapshot now returns 1 on errors (instead of -1). rsnapshot still
+ returns 0 on success.
+
+------------------------------------------------------------------------------
PR: ports/62341
Submitted by: Ralf van Dooren <r.vdooren@snow.nl> (maintainer)
Important changes:
==================
- Kmail and knode have been moved from kdenetwork to kdepim. This
means you will have to install kdepim if you want to continue using
kmail or knode. This is to ease integration with korganizer, in
the new 'Kontact' application.
- The arabic translations for KDE and KOffice have been moved from
misc to the arabic category.
- There is a new module called kdeaccessibility in the accessibility
category. It contains a few utilities for disabled users like a
magnification lens and a text-to-speech frontend.
- In KDM, you need to select the 'CUSTOM' session profile in order
to have your .xsession executed. This is particularly important if
you're using the aegypten tools
(http://freebsd.kde.org/howtos/aegypten-kmail.php).
- We have started making more parts of the ports optional. In kdepim,
both Kandy and KPilot can be turned off with ports-knobs. This
process will continue in the 3.2 series.
o) Add flag WITH_CGI=yes for building with/without cgi support
o) When cgi support is choosen dependency on libgd is now
added out of the ports tree (not internal one).
- Add eject by mount point
- Add -t flag for closing tray
- While here, portlint, DOCSDIR, PLIST_FILES
PR: ports/62201
Submitted by: Przemek Laczynski <torindel@wp.pl>
Enterprise Edition of SUN Grid Engine.
This incorporates policy management functions to allow multiple groups
which is not included in vanilla SUN Grid Engine (sysutils/sge)
PR: 54563
Submitted by: brooks
Many suggestions by: Glenn Johnson <gjohnson at srrc dot ars dot usda dot gov>
functionality of the POSIX batch queueing framework.
WWW: http://gridengine.sunsource.net/
PR: 54563
Submitted by: brooks
Many suggestion by: Glenn Johnson <gjohnson at srrc dot ars dot usda dot gov>
webmin-1.130/usermin/usermin-lib.pl
webmin-1.130/webmin/webmin-lib.pl
The same "base_version" function that "rounds a version number to the
nearest .01" was changed, now it uses sprintf rather than multiply and
divide (but was it worth a tarball reroll?)
- Patch to fix missing paren in src/filedir.c
- Patch for case insensitive hostname matching removed
(now the default as of this version)
While I'm here:
- Respect hier(7): install examples into ${EXAMPLESDIR},
docs into ${DOCSDIR}
PR: 61602
Submitted by: maintainer
- Utilize INFO macro
- Fix CONFIGURE_TARGET for a new configure script
- add patch for right geometry calculation in 5.x
- fix patch-dosc_Makefile.in
- New MAINTAINER: sem@ciam.ru
PR: 61938
Submitted by: Sergey Matveychuk <sem@ciam.ru>
For a full list of changes see:
ftp://ftp.berlios.de/pub/cdrecord/alpha/AN-2.01a25
- Fix previous commit which made the cdrtools-devel port to not print the
available knob in the pre-everything target when said knob is turned on to
not offer it when compiling mkisofs-devel. Note that the former behaviour
will be removed again in case the cdrtools-devel port grows more knobs,
it's just to much mess in the makefile then.
- Introduce a small hack in the makefile of the cdrtools-devel port so the
cdrtools version has to be only specified once for PORTVERSION and DISTNAME.
- Reword the desciption of rscsi in the pre-everything message and the PLIST
to make clear that rscsi is the remote SCSI daemon and clients are built
into cdda2wav, cdrecord, etc. unconditionally.
- Bump the PORTREVISION of the mkisofs-devel port as underlying libraries
have changed.
Submitted by: maintainer
For a full list of changes see:
ftp://ftp.berlios.de/pub/cdrecord/alpha/AN-2.01a25
- Fix previous commit which made the cdrtools-devel port to not print the
available knob in the pre-everything target when said knob is turned on to
not offer it when compiling mkisofs-devel. Note that the former behaviour
will be removed again in case the cdrtools-devel port grows more knobs,
it's just to much mess in the makefile then.
- Introduce a small hack in the makefile of the cdrtools-devel port so the
cdrtools version has to be only specified once for PORTVERSION and DISTNAME.
- Reword the desciption of rscsi in the pre-everything message and the PLIST
to make clear that rscsi is the remote SCSI daemon and clients are built
into cdda2wav, cdrecord, etc. unconditionally.
- Bump the PORTREVISION of the mkisofs-devel port as underlying libraries
have changed.
Submitted by: maintainer
peripherals, file systems, device drivers, or any data stream supported
by the operating system. In its' simplest mode of operation, dt writes
and then verifys its' default data pattern, then displays performance
statisics and other test parameters before exiting. Since verification
of data is performed, dt can be thought of as a generic diagnostic tool.
WWW: http://www.bit-net.com/~rmiller/dt.html
PR: ports/61801
Submitted by: Radim Kolar <hsn@netmag.cz>
* Update docs with a better mergemaster procedure and better markup.
Partially submitted by: ITO Tsuyoshi <tsuyoshi@is.s.u-tokyo.ac.jp>
* Make etcmerge show usage information when run with no arguments.
Noticed by: Daniel O'Connor <doconnor@gsoft.com.au>
o) Modify configure to use internal libgd. This avoids compat problems
and the overkill install of libgd and dependent ports for a apcupsd
server machine.
Submitted by: Neil Darlow <neil@darlow.co.uk>
* The NetBSD pkgsrc patch was imported into the main tree.
* The correct version tag is now printed in the mail header.
* "Open" no longer replaces the text in the Fix section, it includes the file at cursor location.
* A new "Clear" button has been added.
* General code cleanup (mainly GTK_* macros)
PR: 61494
Submitted by: "Miguel Mendez" <flynn@energyhq.es.eu.org> (maintainer)
Approved by: erwin (mentor) (implicitly)
- Use new MASTER_SITES [1]
- Use DOCSDIR and pet portlint [2]
- Add new files in pkg-plist [2]
- Bump PORTREVISION
PR: 61435
Submitted by: Jason Harris <jharris@widomaker.com> [1], krion [2]
'userneu' is a Perl script that parses a list of usernames
and additional information (such as the real name or other
information to be put in the GECOS field in /etc/passwd)
and creates Unix accounts and (if desired) Samba accounts
as well. If the script stumbles upon duplicate user names
it can append random characters to the username until it
fits.
WWW: http://btmdx8.mat.uni-bayreuth.de/~johannes/userneu/userneu.html
-Andreas Fehlner
fehlner@gmx.de
PR: ports/60584
Submitted by: Andreas Fehlner <fehlner@gmx.de>
rsnapshot makes it easy to make periodic snapshots of local machines,
and remote machines over ssh. The code makes extensive use of hard links
whenever possible, to greatly reduce the disk space required.
It is written entirely in perl with no module dependencies, and has been
tested with versions 5.004 through 5.8.1.
WWW: http://www.rsnapshot.org
PR: 60873
Submitted by: Ralf van Dooren <r.vdooren@snow.nl>
If you are using older version of these ports updating is encouraged,
`cdrecord -toc` for CD-ROM drives and a Rock-Ridge related bug in
mkisofs were fixed. For a full list of changes see:
ftp://ftp.berlios.de/pub/cdrecord/alpha/AN-2.01a24
- Add README.audio to the PORTDOCS of cdrtools-devel.
Submitted by: maintainer
ATAidle is a utility to set the power management features
of ata hard drives. This includes idle and standby timeouts,
APM and acoustic level settings, and it can show details about
the installed devices.
PR: 61217
Submitted by: Bruce Cran <bruce@cran.org.uk>
portsdb(1)
- Follow ports intrastructure changes wrt build-time dependency --
now portsdb -U properly picks EXTRACT_DEPENDS so they appear build-time
dependency. (Thanks to schweikh)
misc.
- Fix typos in documentation. I seem to be unable to spell "pacakge"
correctly, being a portmgr. Or was it "pakcage" ? Anyway, it was
fortunate that I wasn't a packge manager.
scan_ffs ported from OpenBSD to FreeBSD with support for UFS1 and UFS2,
allows recovering of lost or deletes disklabels
PR: 61273
Submitted by: mranner@inode.at
Approved by: erwin (mentor) (implicitly)
in pkg-install in pre-install phase (wrong order).
o) Add/delete lines for file, storage and director ports in /etc/services
o) Add bacula patches concerning EOM handling, choosing the next volume, and
calculating weekofmonth
4.0.3:
- Leak in window manager's pixmap management
- Various file manager fixes
- Translation updates
- Support for KDE system tray was added
4.0.2:
* Improve window manager responsiveness
* Various bug fixes in file manager, window manager and panel
* More 64bit clean up
* New translation added: Azerbaijani
to be present, or does not compile on certain versions of FreeBSD. This
will potentially avoid needless compilations on bento, and has the added
benefit of improving certain reporting tools. To most users, this change
is a no-op.
PR: 61090
Submitted by: linimon
An optional dependency has been added for the PECL SQLite,
but it's not supported by this port.
PR: ports/61101
Submitted by: Thierry Thomas <thierry@pompo.net>
As the first step in updating this popular program, I am
releasing the current copy of the source for top 3.5. In
the coming weeks this should become the final 3.5 release.
Beta13 includes updated modules for freebsd, linux, and
AIX.
Included are all patches for FreeBSD 4.7 - 5.2 so that this version
can be used as a drop-in replacement for the base versions (use
TOP_OVERWRITE_BASE=yes)
fixed automatic writing mode selection when the writer does not support DAO
The OggDecoder now refuses non-44100 hz files since it does no resampling yet
fixed vcdimager version check
fixed bug that caused cuefiles to be cut to 0 byte
PR: ports/60764
Submitted by: Heiner Eichmann <h.eichmann@gmx.de> (maintainer)
The only change between 1.2pre2 and 1.2 is the new -m command-line option,
also available as the 'filemode' configuration variable, which specifies
the access mode for the files created in the environment directory.
Requested by: Evren Yurtesen <yurtesen@ispro.net.tr>
o) files dir contains a sample config for network master-slave
which seems to be stable on my test environment
o) still lack of USB support, cause noone ports the LINUX usb code to
FreeBSD (perhaps libusb is also a staring point)
For changes since 2.01a21 see:
ftp://ftp.berlios.de/pub/cdrecord/alpha/AN-2.01a22
and
ftp://ftp.berlios.de/pub/cdrecord/alpha/AN-2.01a23
Submitted by: maintainer
I confirm that I no longer wish to be the maintainer of xlogmaster.
I suggest that the port be deleted. Xlogmaster's author has moved on
to another product, and I don't have the skills to maintain Xlogmaster
itself, particularly those to make it work under release 5 (impacted by
GCC changes).
So, if anyone is using this port, they should step up now to save it on 5.x.
makes differential or full backups, which can be split over
several files or disks. Dar saves *all* UNIX inode types,
hard links, as well as Extended Attributes.
And many other features ...
PR: ports/60846
Submitted by: Edson Brandi <ebrandi@fugspbr.org>