developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.
Bump all ports that directly depend on libglut because of the shlib version
change.
There are some extra items in this patch.
*) Because freeglut doesn't have the same dependancies as libglut, some ports
need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
remains now.
*) While here fix a png related build issue games/vegastrike.
Thanks to miwi for running the exp-run.
Approved by: portmgr (miwi)
Collaboration with: zeising@
Obtained from: xorg-dev staging area.
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility
This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG
it can take the following arguments:
- yes (meaning build only dep)
- build (meaning build only dep)
- run (meaning run only dep)
- both (meaning run and build dep)
From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.
While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config
With Hat: portmgr
Exp-runs by: bapt (pointhat-west), beat (pointyhat)
CONFLICTS, LATEST_LINK, and PORTSCOUT; adjust dependent ports; explicitly
note the restrictive license of the metis ports (while here, append the MPI port to
*DEPENDS in math/parmetis, rather than using an assignment)
PR: 169578
If a user had eigen3 installed, but not eigen2, the min. port version
check would not differentiate between the two.
Submitted by: Jason E. Hale <bsdkaffee at gmail.com> via area51
The QPoint overloads for operator*() were changed in the 4.8.0 release
[1], so we need to add a patch to adjust a cast here.
No PORTREVISION bump since there were no dependency changes and things
are still building fine with Qt 4.7.
[1] a562fd2d20
Approved by: miwi (Qt 4.8.1 exp-run)
Since 4.8.0 [1], Qt itself does not automatically include GLU's
headers and libraries with its OpenGL module, so applications which
relied on Qt to get these need to be adjusted.
PORTREVISION bumped since we now explicitly depend on GLU via
USE_GL=glu.
[1] e7eed096a0
Approved by: miwi (for Qt 4.8.1 to pass the exp-run)
symbols and footprints (traditional and SMD). It aims to be an agile and
effective small EDA tool for hobbyists.
FidoCadJ stores its drawings in a compact text format, practical for the
copy and paste in newsgroups and forums: this has determined its success
on the Usenet and in numerous communities.
WWW: http://davbucci.chez-alice.fr/index.php?argument=elettronica/fidocadj/fidocadj.inc
OpenVSP allows the user to create a 3D model of an aircraft defined by
common engineering parameters. This model can be processed into
formats suitable for engineering analysis.
WWW: http://www.openvsp.org/
PR: ports/166825
Submitted by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
MeshDev is a mesh comparison software. It accepts two meshes as input and
computes the geometrical deviation between the two meshes.
It return numerical values and can optionaly generate visual results (with a
pseudo-colored mesh corresponding to the measured deviation) in OpenInventor
format.
This port features a patch (by myself) to read binary and ASCII STL files.
This feature was removed in the transition from version 0.4 -> 0.5.
Distfiles are unfetchable from sourceforce. For this reason, they're hosted
on our infrastructure.
WWW: http://meshdev.sourceforge.net/
- Delete CONFLICTS, cad/gtkwave is no more [1]
- Port installs icons now, use INSTALLS_ICONS
- Use update-desktop-database to register filetype associations
PR: ports/163987 [1]
Submitted by: maintainer [1]
2011-11-30 textproc/skribe
2011-11-30 emulators/wahcade
2011-11-30 databases/keximdb: Depends on editors/koffice-kde3, which is scheduled for deletion
2011-11-30 editors/koffice-kde3
2011-11-30 net/keepalived: Depends on net/ipvs, which is scheduled for deletion
2011-11-30 net/ipvs: Designed for FreeBSD 5.x, which is no longer supported
2011-11-30 databases/fireprofile
2011-12-01 audio/gnowavcut: Abandonware
2011-12-01 mail/demime: No upstream development since 2007
2011-12-03 x11/wmmsg: No more public distfiles
2011-12-03 x11-toolkits/libgtkeditor: No more supported upstream, not depend on anymore.
2011-12-03 misc/demoniac: No more upstream, no more public distfiles
2011-12-03 cad/gtkwave: No more public distfiles, no more upstream
2011-12-07 databases/clip: No develop anymore for long
2011-12-09 x11-toolkits/gtkextra: no longer supported upstream, no more depend on
- Add USE_GL=glu and USE_BISON=build to fix build
- Make sure that pkgconfig files are installed to ${PREFIX}/libdata/pkgconfig
- Mark MAKE_JOBS_SAFE
- Silence REINPLACE_CMD output
PR: ports/162785 [1]
Submitted by: Erik Greenwald <erik@brlcad.org> (maintainer) [1]
Feature safe: yes
This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.
Approved by: avilla (mentor), portmgr (miwi)
Feature safe: yes
my ports in the past 3 weeks while ports were broken on any 10.x
machines, which means I'm unable to maintain them. So let people know
that there's no available support for them until things are back to
normal (which also means that anyone with spare time will be able
to fix them without getting approval).
2011-09-01 astro/spacechart: Abandonware
2011-09-01 audio/adpcm: No more public distfiles
2011-09-01 audio/aube: Abandonware
2011-09-01 audio/festvox-aec: BROKEN for more than 6 month
2011-09-01 audio/gtkgep: Abandonware
2011-09-01 audio/gtkhirad: No more public distfiles
2011-09-01 audio/opmixer: No more upstream
2011-09-01 audio/swami: Abandonware
2011-09-01 audio/x11amp: Abandonware
2011-09-01 audio/xmms-sndstretch: No Master Site
2011-09-01 cad/linux-gid: No more public distfiles
2011-09-01 chinese/gbscript: No more public distfiles
2011-09-01 chinese/mplayer-fonts: No more public distfiles
2011-09-01 chinese/oxford: No more public distfiles
2011-09-01 chinese/vflib: No more public distfiles
2011-09-01 databases/mysql++: No more public distfiles
2011-09-01 databases/mysql_last_value: No Master Site
2011-09-01 databases/p5-DBIx-Table: No more public distfiles
OpenSCAD is a software for creating 3D CAD objects.
Unlike most free software for creating 3D models, it does not focus on
the artistic aspects of 3D modelling but instead on the CAD aspects.
Thus it is more suitable for creating 3D models of machine parts but
perhaps not when creating computer-animated movies.
OpenSCAD is not an interactive modeller. Instead it is something like
a 3D-compiler that reads in a script file that describes the object
and renders the 3D model from this script file. This gives designers
full control over the modelling process and enables them to easily
change any step in the modelling process or make designes that are
defined by configurable parameters.
WWW: http://www.openscad.org/
Obtained from (slightly): OpenBSD
cad/gmsh-occ should reflect that of cad/gmsh.
- Bumping portrevision for master port cad/gmsh so that version for
cad/cad-gmsh does not go backwards.
Approved by: maho (mentor)
remove support for them from bsd.java.mk. As Jikes is not available in Java 1.5
or higher, remove it from bsd.java.mk too (suggested by hq@) and from the ports
which used it (only occurences were USE_JIKES=no). Support for the Blackdown VM
is also removed, as it is not available in Java 1.5 and higher.
Also remove the mapping from Java 1.1-1.4 to Java 1.5+ in bsd.java.mk to detect
old, broken ports; therefore bump the minimal value of JAVA_VERSION to 1.5.
While here, replace static values of JAVA_VERSION in files/*.in by
%%JAVA_VERSION%% .
PR: ports/158969
Submitted by: rene
Tested on: pointyhat-west -exp
2011-04-17 cad/tclspice: has been broken for more than a year
2011-04-17 comms/hcfmdm: does not compile on 7.X or higher
2011-04-17 databases/mysqlcc: has been broken for almost a year
2011-04-17 devel/ruby-rjudy: does not compile on FreeBSD 7.x or newer
2011-04-17 devel/xfc: does not compile on FreeBSD 7.x or newer
2011-04-17 devel/lamson: has been broken for a half year
2011-04-17 devel/cocktail: does not build on FreeBSD 7.x or newer
2011-04-17 devel/djgpp-gcc: has been broken for half a year
2011-04-17 devel/gauche-sdl: has been broken for a year
2011-04-17 devel/gdb53-act: does not compile on FreeBSD 7.x and up
2011-04-17 editors/zed: does not compile on FreeBSD 7.x or newer
2011-04-17 games/aqbubble: does not compile on FreeBSD 7.x or newer
2011-04-17 graphics/libvisual-plugins: has been broken for 3 years
2011-04-17 japanese/roundcube: has been broken for almost a year
2011-04-17 japanese/tkstep80: does not compile on FreeBSD 7.x or newer
2011-04-17 lang/u++: has been broken for over a half year
2011-04-17 lang/pugs: has been broken for over a year
2011-04-17 lang/mozart: does not compile on FreeBSD 7.x or newer
2011-04-17 math/linalg: does not build on FreeBSD 7.x or newer
2011-04-17 math/R-cran-igraph: has been broken for over a half year
2011-04-17 misc/ftree: has been broken for over a half year
2011-04-17 multimedia/katchtv: has been broken for a half year
2011-04-17 multimedia/libomxil-bellagio: has been broken for almost a year
2011-04-17 multimedia/banshee-mirage: has been broken for over a half year
2011-04-17 net-p2p/trackerbt: has been broken for a half year
2011-04-17 net/cap: does not compile on FreeBSD 7.x or newer
2011-04-17 net/ggsd: does not compile on FreeBSD 7.x or newer
2011-04-17 net/b2bua: does not compile on FreeBSD 7.x or newer
2011-04-17 net/penguintv: has been broken for a half year
2011-04-17 news/openftd: has been broken for almost a year
2011-04-17 palm/romeo: does not compile on FreeBSD 7.x or newer
2011-04-17 science/pcp: does not compile on FreeBSD 7.x or newer
2011-04-17 science/elmer-fem: has been broken for over a year
2011-04-17 security/newpki-lib: does not compile on FreeBSD 7.x or newer
2011-04-17 security/newpki-server: does not compile on FreeBSD 7.x or newer
2011-04-17 security/xmlsec: does not compile on FreeBSD 7.x or newer
2011-04-17 security/f-protd: has been broken for over a year
2011-04-17 sysutils/xwlans: does not compile on FreeBSD 7.x or newer
2011-04-17 www/bk_edit: does not compile on FreeBSD 7.x and newer
2011-04-17 www/bricolage: has been broken for a half year
2011-04-17 x11-toolkits/gauche-gtk: has been broken for a year
2011-04-17 x11-toolkits/gambas2-gb-qt: has been broken for over a year
2011-04-17 x11-toolkits/php-gtk2: has been broken for over a half year
2011-04-17 x11-toolkits/p5-Tcl-Tk: has been broken for 2 year
2011-04-17 x11/metisse: has been broken for over a half year
switch some dependencies from science/hdf5 to science/hdf5-18.
As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.
PR: ports/154736
MeshLab is an open source, portable, and extensible system for the processing
and editing of unstructured 3D triangular meshes.
WWW: http://meshlab.sourceforge.net/
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
which helps to reduce the costs and delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
which has been based on this platform
+All functionalities are accessible through the programmatic
integrated Python console
This package contains Job manager module.
WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com
PR: ports/152396
Submitted by: Stas Timokhin <devel at stasyan.com>
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
which helps to reduce the costs and delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
which has been based on this platform
+All functionalities are accessible through the programmatic
integrated Python console
This package contains NETGENPLUGIN module.
WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com
PR: ports/152396
Submitted by: Stas Timokhin <devel at stasyan.com>
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
Bapt <baptiste.daroussin@gmail.com>
jsa@
miwi@
Sergio de Almeida Lenzi <lenzi.sergio@gmail.com>
Maxim Samsonov <xors@mne.ru>
Kris Moore
And pav@ for 2 exp-runs
PR: ports/152255
ports/143260
ports/141033
ports/149629
ports/150350
ports/151523
With hat: gnome@
Features
--------
- PCB can directly import (forward annotate) schematics while running.
- Many places where measurements are entered now accept units, like
"5mm", and "cm" and "in" are allowed too.
- Free Rotate Buffer added to menu
- Polygon Hole tool.
- F12 invokes the Lock tool.
- Russian translation added.
- DBUS is enabled by default when possible.
- Command-line exporters can run action scripts too.
- GTK tool tips on elements, pins, and nets.
- Command-line actions in GUIs do not require (,,) syntax.
- PCB can import footprints both in subdirectories and the named directories.
- New GCode exporter.
- Footprint files use ".fp" as the suffix; this is automatically
searched for if needed.
- GTK dialogs do not show at startup unless requested.
- Stackup can be specified on the command line for command-line exporting.
- Reference card updated.
- The snap-point in pads is the center.
- The 's' key toggles polygons to clear/notclear all pads and pins
Bug Fixes
---------
- Various PNG export fixes.
- lesstif's magic toggle-layers-on-flip fixed.
- Arc bounding box math fixed.
- Fixed: sometimes, disabling silk also disabled the solder layer.
- "pcb --help" prints all options again
- Add mnemonic for "close without saving"
- Don't select silk on the back side when it's invisible.
- Various polygon rendering bugs fixed.
- PNG drill bloat export fixed.
- Attempts to change polygon clearance *on* polygons results in a hint.
- PNG doesn't segfault if not all graphic formats are supported.
- Various toporouter fixes and improvements
- HID_Mixed is supported in attribute dialogs
- Flipped rectangles in PS exports are drawn correctly.
- Optimizer removes micro-traces under pads.
- Vias, pins, and pads are now drawn under the mask instead of over.
files for elements and diagrams, and includes both a diagram editor and an
element editor.
WWW: http://qelectrotech.org/
PR: ports/146513
Submitted by: Gvozdikov Veniamin <g.veniamin at googlemail.com>
Approved by: pgj (mentor)
